Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply
puritysourcelabs
Research Chemical SciencesUGFREAKeudomestic
napsgeargenezapharmateuticals domestic-supplypuritysourcelabsResearch Chemical SciencesUGFREAKeudomestic

Firtst cycle test c + ghrp6 + cjc1295 + cardarine

Revenge

New member
sorry for googletranslate :(
I want to enter the first cycle. I bought it as raw material, the products are in powder form. but I do not know how to prepare some of them.

Test Cyp, 40 ml / 250mg
10 gr powder
22,91ml GSO
0,8 ml ba
7,2 ml bb

Cardarine, 60 ml / 10mg
600 mg powder
59,4 ml propylene glycol or ethyl alcohol or alcohol
Does the dropper have to be sterile? or is it enough to just wash with alcohol?

Ghrp-6, 5 mg / 100 mcg
5mg powder
5mg bacteriostatic water ?

Cjc1295 no dac, 2 mg / 100 mcg
2mg powder
2mg bacteriostatic water ?

Triptorelin, 1 mg
#I do not know ?

are the blends correct?

the loop will be like this
1-12 week 500 mg testo c
5-12 weeks ghrp-6 100mcg ED
5-12 weeks cjc1295 100mcg ED
14-17 week cardarine 10 mg ED
14. week only once 100mcg triptorelin

dx4rPG
 
no one to answer?
Are the drugs and ratios used correct?

Do a search for raws. It's not something I know too much about but I think we've got a bunch of members who make there own product.
 
sorry for googletranslate :(
I want to enter the first cycle. I bought it as raw material, the products are in powder form. but I do not know how to prepare some of them.

Test Cyp, 40 ml / 250mg
10 gr powder
22,91ml GSO
0,8 ml ba
7,2 ml bb

Cardarine, 60 ml / 10mg
600 mg powder
59,4 ml propylene glycol or ethyl alcohol or alcohol
Does the dropper have to be sterile? or is it enough to just wash with alcohol?

Ghrp-6, 5 mg / 100 mcg
5mg powder
5mg bacteriostatic water ?

Cjc1295 no dac, 2 mg / 100 mcg
2mg powder
2mg bacteriostatic water ?

Triptorelin, 1 mg
#I do not know ?

are the blends correct?

the loop will be like this
1-12 week 500 mg testo c
5-12 weeks ghrp-6 100mcg ED
5-12 weeks cjc1295 100mcg ED
14-17 week cardarine 10 mg ED
14. week only once 100mcg triptorelin

dx4rPG

Have you Ever Brewed Anything, it can be more Difficult than you 1st Imagined.
Do you have All the Beakers/Different Size Syringes/Filters/and Vials to start this ?

The Recipe for the Sust is OK.

Your Cardarine Recipe is Wrong.
600 Mg of Powder would need like 10 x's the amount of Liquid to make 10 Mg/Ml.
Everclear is the Best Alcohol to use, but it's Not available in all states.
You are going to Need a Bunch of Bottles.
Go to Med-Lab supply, they carry All the Equipment you'll need for the SARMS and Sustanon making.

With the Peptides, you can use the amounts of Water you have to reconstitute.
If that makes the Math easier for Injecting the correct amount.

Take the Triptorelin and Throw that Crap in the Trash.
It's Dangerous and shouldn't be used for PCT.
Do a Proper PCT when you finish your Sustanon Cycle............................. JP
P.S.
Here's the Link to Medlab Supply.

https://www.medical-and-lab-supplies.com/1oz-empty-blue-glass-dropper-vial.html
 
Found a Recipe for the Cardarine.

10 Mg of Raw Powder and 1,000 Ml of Liquid will give you 10 Mg/Ml Cardarine.
You can use PEG-300 & Ethyl Alcohol or Everclear.

I've seen 30 ml of Ethyl Alcohol or Everclear.
Mix Thoroughly, then start adding the PEG 300, you'll need roughly 970 Ml.
But add it Half, then Heat and Stir till the contents becomes Clear.
As it starts to Clear, then add the rest of the PEG-300.

If you were to do the Entire amount in Everclear, you could Blow Yourself Up.
Everclear is 190 Proof Alcohol.............................. JP
 
Have you Ever Brewed Anything, it can be more Difficult than you 1st Imagined.
Do you have All the Beakers/Different Size Syringes/Filters/and Vials to start this ?

The Recipe for the Sust is OK.

Your Cardarine Recipe is Wrong.
600 Mg of Powder would need like 10 x's the amount of Liquid to make 10 Mg/Ml.
Everclear is the Best Alcohol to use, but it's Not available in all states.
You are going to Need a Bunch of Bottles.
Go to Med-Lab supply, they carry All the Equipment you'll need for the SARMS and Sustanon making.

With the Peptides, you can use the amounts of Water you have to reconstitute.
If that makes the Math easier for Injecting the correct amount.

Take the Triptorelin and Throw that Crap in the Trash.
It's Dangerous and shouldn't be used for PCT.
Do a Proper PCT when you finish your Sustanon Cycle............................. JP
P.S.
Here's the Link to Medlab Supply.

https://www.medical-and-lab-supplies.com/1oz-empty-blue-glass-dropper-vial.html

I will cook testosterone for the first time. and this testesterone cypionate. bad choice i guess for a first time. There are all, except for the syringe filter.
peg300 does it have to be? EverClear not here but I can find ethyl alcohol.
Why did you say so for triptorelin? Does anyone use it?
 
I will cook testosterone for the first time. and this testesterone cypionate. bad choice i guess for a first time. There are all, except for the syringe filter.
peg300 does it have to be? EverClear not here but I can find ethyl alcohol.
Why did you say so for triptorelin? Does anyone use it?

Sorry, I was looking at something else, and thought it was Sustanon.

Test Cyp is easier to make, it will not Crash as easily, if you do it correctly.
Do you have a Thermometer you can put in the Beaker, as you don't want to Boil the Hormone, just Heat it up.
You can use a Gas Stove, an Oven, a Microwave, or a Hot Plate.
I use a Hot Plate, and a Glass Rod to stir with, as it's easier to control the temperature, but all will work.

The Link I gave you to Med-Lab, has Everything you will need for making the Test Cypionate.
They have many types of Filters, but a Syringe Filter is the Least Expensive.

You really want to Dilute Ethyl Alcohol, not good to drink it straight.
Med-Lab carries the PEG-300 (Polyethylene Glycol - 300).

Triptorelin is Dangerous, it's actually used as a form of Chemical Castration.
So I don't recommend using it.
Whoever told you to use it, instead of Clomid and Nolvadex.
Doesn't read the Clinical Studies on such Compounds................................ JP
P.S.
I actually posted on Triptorelin a few days ago.
Don't know who is giving out the Bad Advice, but it seems to be going around the Forums !
 
Revenge:
What size Vials are you using for the Test Cyp.
And are they already Capped or are you going to Cap them after Filling.

You can save Money by using the already Capped Vials.
You just need to use a Vent Needle when Filling the Vials, so the Air can be Displaced.
Without a Vent Needle, you won't be able to Fill your Vial or Vials................................. JP
P.S.
Vent Needle ~ just take the Needle off of another Syringe, and put it through the Stopper of the Vial you are going to fill.
Now when you put your other Needle with the Syringe Filter Attached.
You'll be able to Filter your Test Cyp and Fill directly into a Sterile Vial.
 
Seems like @JP4355 has you covered.

Personally, I would not home brew. I just don't think it's worth it. The laws for importing raw steroids are MUCH more severe then getting caught buying steroids for personal usage.

Why risk facing major jail time just to save a couple bucks?
 
Does the dropper have to be sterile?
Peg300 will be hard to find. I will rethink the work of triptorelin. thank you.
meanwhile the test cyp recipe suits?

- - - Updated - - -

Revenge:
What size Vials are you using for the Test Cyp.
And are they already Capped or are you going to Cap them after Filling.

You can save Money by using the already Capped Vials.
You just need to use a Vent Needle when Filling the Vials, so the Air can be Displaced.
Without a Vent Needle, you won't be able to Fill your Vial or Vials................................. JP
P.S.
Vent Needle ~ just take the Needle off of another Syringe, and put it through the Stopper of the Vial you are going to fill.
Now when you put your other Needle with the Syringe Filter Attached.
You'll be able to Filter your Test Cyp and Fill directly into a Sterile Vial.

10ml 25*40 vials. open vials. I will close it after filling it.

- - - Updated - - -

Seems like @JP4355 has you covered.

Personally, I would not home brew. I just don't think it's worth it. The laws for importing raw steroids are MUCH more severe then getting caught buying steroids for personal usage.

Why risk facing major jail time just to save a couple bucks?

things are a bit complicated here and it is very hard to find original goods. so I made the safest goods myself.
 
Revenge ~ you bought the Open Vials and Tops.
You have the Crimper to seal the Vials.............................. JP
P.S.
Had you asked me before purchasing, I could have saved a lot of Money.

Crimpers start @ $180.
And you could have gotten the already sealed Vials for $2
Instead of paying over $2, just for the Vial Seal, and another 80 cents for the Vial inself.
 
vials, rubbers and caps are all right. The only thing I can not find is a syringe filter. I will sterilize the vials in the oven(electric oven), with dry air. Will the sterilization break down if the vials get air after the vials leave the oven?
vials= https://ibb.co/dQaF4G
 
vials, rubbers and caps are all right. The only thing I can not find is a syringe filter. I will sterilize the vials in the oven(electric oven), with dry air. Will the sterilization break down if the vials get air after the vials leave the oven?
vials= https://ibb.co/dQaF4G

The Link I gave you to Medlab Supply, they have the Syringe Filters.

You have to be Extremely Careful with Sterilizing Open Vials, as they are Easily Contaminated.
Even after Sterilization, that's why I always use the Sealed Vials.
You'll need to make some type of Clean Space to work in.
And you should be Wearing, Gloves/Mask/and Lab Coveralls.
You made this way harder than it has to be, with the Open Vials....................... JP
P.S.
I use the 22 UM Whatman Syringe Filter.
If I need to Filter the Carrier Oil, then I use the 45 UM Whatman for that.
Then once everything is combined, I use the 22 UM Whatman, to Filter the Final Product into the Vials.

If your Carrier Oil isn't USP-Grade, it should be Filtered.

https://www.medical-and-lab-supplie...-sterile-pvdf-membrane-25mm-0-2-m-0-45-m.html
 
Last edited:
The Link I gave you to Medlab Supply, they have the Syringe Filters.

You have to be Extremely Careful with Sterilizing Open Vials, as they are Easily Contaminated.
Even after Sterilization, that's why I always use the Sealed Vials.
You'll need to make some type of Clean Space to work in.
And you should be Wearing, Gloves/Mask/and Lab Coveralls.
You made this way harder than it has to be, with the Open Vials....................... JP
P.S.
I use the 22 UM Whatman Syringe Filter.
If I need to Filter the Carrier Oil, then I use the 45 UM Whatman for that.
Then once everything is combined, I use the 22 UM Whatman, to Filter the Final Product into the Vials.

If your Carrier Oil isn't USP-Grade, it should be Filtered.

https://www.medical-and-lab-supplie...-sterile-pvdf-membrane-25mm-0-2-m-0-45-m.html

thank you. I use food grade carrier oil. I want to filter after the medicine is prepared.
There are many products for peg 300 and the formulas are different. which product, can you show?

https://www.sigmaaldrich.com/catalo...ocus=productN=0 220003048 219853286 219853261
 
thank you. I use food grade carrier oil. I want to filter after the medicine is prepared.
There are many products for peg 300 and the formulas are different. which product, can you show?

https://www.sigmaaldrich.com/catalo...ocus=productN=0 220003048 219853286 219853261
You want the 1st one ~ the USP Grade ~ Polyethylene Glycol 300.
Do you plan on buying alot, cause they only sell Large Quantities.
Otherwise you can't buy from Sigma-Aldrich.
I know, as I'm a Global Adviser for Sigma-Aldrich.

Go to Medlab and buy it there.
If you try to buy from Sigma, they are going to want to know.
What Laboratory you work for, and most likely a Phone Number for your place of Business.
They do Check on all Purchasers.

If you are using Food Grade Oil as your Carrier.
You Need to Filter it before you add the Hormone/BA/BB, and Cook it.
Then you will need to Filter it again when you fill your Vials.

If you don't Filter it Twice, you risk Contamination of the Final Product.
As Food Grade Oils aren't meant to be Injected............................ JP
 
You want the 1st one ~ the USP Grade ~ Polyethylene Glycol 300.
Do you plan on buying alot, cause they only sell Large Quantities.
Otherwise you can't buy from Sigma-Aldrich.
I know, as I'm a Global Adviser for Sigma-Aldrich.

Go to Medlab and buy it there.
If you try to buy from Sigma, they are going to want to know.
What Laboratory you work for, and most likely a Phone Number for your place of Business.
They do Check on all Purchasers.

If you are using Food Grade Oil as your Carrier.
You Need to Filter it before you add the Hormone/BA/BB, and Cook it.
Then you will need to Filter it again when you fill your Vials.

If you don't Filter it Twice, you risk Contamination of the Final Product.
As Food Grade Oils aren't meant to be Injected............................ JP


Is this the name? I will order from elsewhere but I need to know exactly what it is.
1546423 United States Pharmacopeia (USP) Reference Standard (USP)

I ordered the filters. 25mm 0,2um pvdf
Can I do this with the filter? food grade oil
 
Is this the name? I will order from elsewhere but I need to know exactly what it is.
1546423 United States Pharmacopeia (USP) Reference Standard (USP)

I ordered the filters. 25mm 0,2um pvdf
Can I do this with the filter? food grade oil

You are making this More Difficult than it is.
You want USP-Grade PEG-300, another Company may Not be using the USP Designation.
If you tell me which company, that would be helpful.

Yes, you can Filter the Food Grade Oil with those Filters.
Then Filter the Final Product again.
So long as you got the Sterile Filters, and Not the Unsterile Filters, you are good...................... JP
 
Back
Top Bottom