Xeno Pharmaceuticals
Banned
Xeno Pharmaceuticals Pre-Intro
We are a small start-up domestic source that focuses on quality of products over quantity of products. We will never put out a product we do not have 100% faith in. I will be transparent with everyone as possible while still ensuring safety and security. This is a pre-introduction as I will post a full line of our products when I reach 100 post count and have complied with any testing/verification processes this board requests. I will be giving samples out to any respected members on this board within the week. I will inform everyone of the exact date samples are to be given out as soon as possible.
In the meantime I would like to get feedback on any test that you would have me or other members perform. We have done melting point tests on our products and all have passed and 100% liquified at the correct temperatures. We would like to HPLC/MS our raws but would rather have the facility suggested than arbitrarily decide. (Do not want members to feel we may have negotiated a higher percentage test which the facility I know of other sources who have actually done this) Please make sure you do your research on the testing facilities you suggest, I cannot stress the importance enough, all MS alone and even most HPLC/MS that are conducted are extremely inaccurate (you cannot conduct an accurate test without a reference point ie. a previously calibrated test based upon the reading of a 99% pure sample) Sources know or should know this and most tests you see are simply used as a means to give a false sense of security to members. LabMax is highly inconclusive and has been proven inaccurate but i will be happy to comply with these tests as well if that is what the members here would like (although melting point is a much better option IMO) Below I will disclose as much information about our company as possible..
Raw Manufacturer-
Our main raw manufacturer is a large industrial company that manufacturers APIs, Intermiediates and Nutraceuticals. The rather small selection of Testosterone derivatives they have available can only be purchased in kg. Therefore, as we are a brand new company we will only be ordering a limited number of products. All other commonly used sources found on websites such as Made-in-China Alibaba etc. are merely middle-men which we would like to deal with as little as possible. (Fun fact, when we first made contact with our supplier we were quoted for a price per kg assuming a 50kg order! I laughed and requested price per single kg.)
Brewing Process-
We use pre-sealed sterile vials in order to ensure product sterility. All Carrier Oils used are USP grade and .22 micron filtered, currently our oil of choice is cottonseed oil as it has a much longer shelf life. Gloves, Masks, and disposable lab coats are worn at all times while cooking and distributing the oils to their pre-sealed vials.
We use a low percentage BA-BB cook to suspend the hormone. Each batch has its own specific lot number as a means of identifying which batches have and have not been tested and if by some chance a recall is required.
Products-
Testosterone Cypionate- 250mg/mL 10mL
Testosterone Propionate- 100mg/mL 10mL
Trenbolone Acetate- 100mg/mL
Nandrolone Decanoate- 200mg/mL
We will slowly add more injectables and begin producing orals as we start to make sales and verify the quality of other raw products. (Requests for certain products will be taken into consideration so i would appreciate any and all suggestions we are looking at adding Tren E NPP Dbol and Anavar unless otherwise requested)
Payment-
I only accept Western Union at the moment but if demand is high enough for other payment options i will be willing to set these up as well.
T/A-
Handling will be 2 days unless otherwise specified, if we cannot keep up with volume at any time the board will be notified.
We will only ship through UPS for legal reasons, UPS ground will be standard but we are willing to accommodate for any specific shipping request.
Product pictures-
In all honesty I can not post these yet but intend to. This is due to the fact our labels have not yet come in from the manufacturer and I would only like to release pictures at that time. If the labels do not come in within the week (International Manufacturer) I will consider sending out the samples regardless if the board would really like me to. I should however have the design sent to me tonight and will post that when i receive it.
Safety-
All communications will be done through a countermail PGP encrypted email.
All customer information and orders are deleted after product is shipped.
Packaging is discreet and well put together to ensure the package arrives, and arrives intact.
If there is anything I missed I appreciate any and all feedback and will answer promptly and accurately.
Thank you,
Xeno Pharmaceuticals
We are a small start-up domestic source that focuses on quality of products over quantity of products. We will never put out a product we do not have 100% faith in. I will be transparent with everyone as possible while still ensuring safety and security. This is a pre-introduction as I will post a full line of our products when I reach 100 post count and have complied with any testing/verification processes this board requests. I will be giving samples out to any respected members on this board within the week. I will inform everyone of the exact date samples are to be given out as soon as possible.
In the meantime I would like to get feedback on any test that you would have me or other members perform. We have done melting point tests on our products and all have passed and 100% liquified at the correct temperatures. We would like to HPLC/MS our raws but would rather have the facility suggested than arbitrarily decide. (Do not want members to feel we may have negotiated a higher percentage test which the facility I know of other sources who have actually done this) Please make sure you do your research on the testing facilities you suggest, I cannot stress the importance enough, all MS alone and even most HPLC/MS that are conducted are extremely inaccurate (you cannot conduct an accurate test without a reference point ie. a previously calibrated test based upon the reading of a 99% pure sample) Sources know or should know this and most tests you see are simply used as a means to give a false sense of security to members. LabMax is highly inconclusive and has been proven inaccurate but i will be happy to comply with these tests as well if that is what the members here would like (although melting point is a much better option IMO) Below I will disclose as much information about our company as possible..
Raw Manufacturer-
Our main raw manufacturer is a large industrial company that manufacturers APIs, Intermiediates and Nutraceuticals. The rather small selection of Testosterone derivatives they have available can only be purchased in kg. Therefore, as we are a brand new company we will only be ordering a limited number of products. All other commonly used sources found on websites such as Made-in-China Alibaba etc. are merely middle-men which we would like to deal with as little as possible. (Fun fact, when we first made contact with our supplier we were quoted for a price per kg assuming a 50kg order! I laughed and requested price per single kg.)
Brewing Process-
We use pre-sealed sterile vials in order to ensure product sterility. All Carrier Oils used are USP grade and .22 micron filtered, currently our oil of choice is cottonseed oil as it has a much longer shelf life. Gloves, Masks, and disposable lab coats are worn at all times while cooking and distributing the oils to their pre-sealed vials.
We use a low percentage BA-BB cook to suspend the hormone. Each batch has its own specific lot number as a means of identifying which batches have and have not been tested and if by some chance a recall is required.
Products-
Testosterone Cypionate- 250mg/mL 10mL
Testosterone Propionate- 100mg/mL 10mL
Trenbolone Acetate- 100mg/mL
Nandrolone Decanoate- 200mg/mL
We will slowly add more injectables and begin producing orals as we start to make sales and verify the quality of other raw products. (Requests for certain products will be taken into consideration so i would appreciate any and all suggestions we are looking at adding Tren E NPP Dbol and Anavar unless otherwise requested)
Payment-
I only accept Western Union at the moment but if demand is high enough for other payment options i will be willing to set these up as well.
T/A-
Handling will be 2 days unless otherwise specified, if we cannot keep up with volume at any time the board will be notified.
We will only ship through UPS for legal reasons, UPS ground will be standard but we are willing to accommodate for any specific shipping request.
Product pictures-
In all honesty I can not post these yet but intend to. This is due to the fact our labels have not yet come in from the manufacturer and I would only like to release pictures at that time. If the labels do not come in within the week (International Manufacturer) I will consider sending out the samples regardless if the board would really like me to. I should however have the design sent to me tonight and will post that when i receive it.
Safety-
All communications will be done through a countermail PGP encrypted email.
All customer information and orders are deleted after product is shipped.
Packaging is discreet and well put together to ensure the package arrives, and arrives intact.
If there is anything I missed I appreciate any and all feedback and will answer promptly and accurately.
Thank you,
Xeno Pharmaceuticals