Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply
puritysourcelabs
Research Chemical SciencesUGFREAKeudomestic
napsgeargenezapharmateuticals domestic-supplypuritysourcelabsResearch Chemical SciencesUGFREAKeudomestic

Homebrewers lounge

Status
Not open for further replies.
I would rather ask then make a mistake....should I put a disclaimer..
AC doesn't know jack...did everyone start as a master?.
I figured I would check what i hear versus what I have from my private resource.
I guess I need to find A different forum altogether.

I asked caveman as he has been helping me along
 
I would rather ask then make a mistake....should I put a disclaimer..
AC doesn't know jack...did everyone start as a master?.
I figured I would check what i hear versus what I have from my private resource.
I guess I need to find A different forum altogether.

I asked caveman as he has been helping me along

It's got nothing with being new. It's the laziness that is annoying. Go google eq recipes for awhile. Look around and see which one looks correct, and then double check here. This thread is to help people along when they have questions, not baby you from start to finish.
 
Ahh yea I remember the name, I dont rage on anyone really don't trip, but shouldnt have let it keep you quite brother esp. If your not what I felt you possibly were. Anyhow, stuck around so, my bad on that glad you see the reason behind it though. Yea I certainly do purchase from multiple sources, one of those of just not putting all your eggs in one basket type deal. Researchsupply is a big one most people purchase through, been with them for a long time don't like them much at all but they have a growing selection of materials catering to our needs so obviously something's are just convienent when purchased at the same time. Oils I really go all over the place and have found many eBay sellers indeed do carry great usp grade oils... Doesn't even have to be USP I filter all my oils the second they arrive and into media bottles they go until use. Now since you are in fact asking for a recipe for something you can almost use in its raw form lol, I'll tell you where I like it, and I believe strong arms means it's easier for others to know when someone's putting in the time by just posting a recipe you perhaps came across when searching, and asking everyone for opinions, where I would have simply said sure, that one works, but consider dropping your Bb down or up to 8-10% to thin it out some for solvent isn't really required much with eq right? Could also cut your oil with some EO to even further thin the final product as well. BA I rarely go above 1.5%. Oil(s) of your choice...
 
someone's putting in the time by just posting a recipe you perhaps came across when searching, and asking everyone for opinions,

This is exactly why I posted like that. It's the kids running around not doing any research that get hurt/hurt this worlds reputation. There is a plethora of information a couple google searches away. Absolutely zero need to ask a single question on your basic brews like test, deca, eq, and so on. If you want to outline your plan and ask for suggestions, hells yea I can, I love helping people out. I'm not going to spoon feed you basic info you should already know though.
 
I have never brewed, have everything I need just still doing research so I'll probably be asking some questions when I get to the more expensive compounds. Test e, test p, sust, DECA, eq I'm pretty confident I can do without fucking up
 
I have never brewed, have everything I need just still doing research so I'll probably be asking some questions when I get to the more expensive compounds. Test e, test p, sust, DECA, eq I'm pretty confident I can do without fucking up

By all means outline every step of your brewing process when you get ready bro. Double checking/offering suggestions is the point of this thread.

Asking for a recipe for 200mg/ml EQ though? Common, 1 google search and you can find 1000 different recipes. Atleast take the time to google something and ask if it looks good to go. Don't just lazily ask for the answer
 
By all means outline every step of your brewing process when you get ready bro. Double checking/offering suggestions is the point of this thread.

Asking for a recipe for 200mg/ml EQ though? Common, 1 google search and you can find 1000 different recipes. Atleast take the time to google something and ask if it looks good to go. Don't just lazily ask for the answer


Honestly the basskiller calculator part I don't get. Why do they always say to use .85 as powder weight? Other than that I understand most stuff stuff.
 
Honestly the basskiller calculator part I don't get. Why do they always say to use .85 as powder weight? Other than that I understand most stuff stuff.

.85 is just an average number used for most raws. Most raws actual displacements are listed off to the side of that calc. Using .85 or the actual displacement numbers makes very little difference. Just go ahead and toss in the real one if it's there though. If not, don't sweat it. You are talking like a 2% difference, so it really doesn't make a difference
 
.85 is just an average number used for most raws. Most raws actual displacements are listed off to the side of that calc. Using .85 or the actual displacement numbers makes very little difference. Just go ahead and toss in the real one if it's there though. If not, don't sweat it. You are talking like a 2% difference, so it really doesn't make a difference

Perfect thank you. I thought it was being lazy but if it makes such a small difference I'll use that. Can't wait to start now that I got by cold pressed gso.
 
Ahh yea I remember the name, I dont rage on anyone really don't trip, but shouldnt have let it keep you quite brother esp. If your not what I felt you possibly were. Anyhow, stuck around so, my bad on that glad you see the reason behind it though. Yea I certainly do purchase from multiple sources, one of those of just not putting all your eggs in one basket type deal. Researchsupply is a big one most people purchase through, been with them for a long time don't like them much at all but they have a growing selection of materials catering to our needs so obviously something's are just convienent when purchased at the same time. Oils I really go all over the place and have found many eBay sellers indeed do carry great usp grade oils... Doesn't even have to be USP I filter all my oils the second they arrive and into media bottles they go until use. Now since you are in fact asking for a recipe for something you can almost use in its raw form lol, I'll tell you where I like it, and I believe strong arms means it's easier for others to know when someone's putting in the time by just posting a recipe you perhaps came across when searching, and asking everyone for opinions, where I would have simply said sure, that one works, but consider dropping your Bb down or up to 8-10% to thin it out some for solvent isn't really required much with eq right? Could also cut your oil with some EO to even further thin the final product as well. BA I rarely go above 1.5%. Oil(s) of your choice...

Clear PM bros


Sent from my iPhone using Tapatalk
 
I trust my raws but they very on percentage. this time around my prop was fire it won't give me wings.I just feel like it does.

caveman72 using not abusing
 
what is a good place to get raws for making a home brew? I'm amazed by how much money I can save prepping my own test and now have the potential of being able to afford more than just test.

Also should I get Tbol or Boldenone? I really wanted to run a mild 8 week cycle and thats why tbol with test seems appealing, but not stressing the liver with tbol would also be nice. haha
 
Do you know anything about them though? I really want a legit a place to get raws. Is domestic even an option with raws?
 
Do you know anything about them though? I really want a legit a place to get raws. Is domestic even an option with raws?

You have to look around. You won't just be handed a source with a handful of posts. Even look at the very 1st page of this section
 
what is a good place to get raws for making a home brew? I'm amazed by how much money I can save prepping my own test and now have the potential of being able to afford more than just test.

Also should I get Tbol or Boldenone? I really wanted to run a mild 8 week cycle and thats why tbol with test seems appealing, but not stressing the liver with tbol would also be nice. haha

I like primo its affordable buying it and brewing it go with enanthate unless you want to dot on a half a cheek than switch e.o.d.its painfully pip.nit worth but with enanthate primo mo pip bit go high 1000 a week for sure or just good old deca please

caveman72 using not abusing
 
Does anyone know a good recipe for Testosterone Phenyl-Propionate. Should I stick to a 100mg per ml dosage or can 250mg concentration?

Also is there any advantage in making tbol injectable? Like less liver stress if you inject tbol. Lastly, is peg300 necessary for when making an oral suspension.
 
Status
Not open for further replies.
Back
Top Bottom