My testosterone homebrew

[BodyEnergy]

Hi guys.
Today is my post day and considering that i came back to a normal life its also important to have testo level even normal but better over the normal, by now is 1 year that i doing my self my testosterone but my last batches were little painfull, and this is also a reason because i starts hcg instead of trt with testosteron, because everytime i pin i had flu like shimpthoms and pain the zone.
I have got blood work during 200mg weekly and the free testo was on the roof 3200ng.
The formula that i used was
1 ba
20bb
50 gso
50 eo
I used eo becuase it supposed to be little anestetic but nothing at all.
I would lower drastically bb and ba
And stay to 1% ba and 5-10% bb
Could ne these 2 compound a cause for my pain and feeling sickness after the shoots?
Thank you

 

[muskate]

I personally do not homebrew but you can get your question answered in the home brewers lounge thread -> https://www.evolutionary.org/forums/source-talk/homebrewers-lounge-part-2-a-34895.html

Personally, I would just order testosterone from one of the approved sources on the board. Especially if you are just doing TRT and using only 200mg/week, a vial of test will only cost you about 60 bucks and last you almost 3 months. That's pennies when you think of it. Why risk homebrewing and face huge legal consequences for importing raw hormones?

A properly run UG lab will have lab equipment that costs in the neighbourhood of a quarter million. No matter how good you are at home brewing, it will never match the quality of a properly run UG lab.

 

[BodyEnergy]

I personally do not homebrew but you can get your question answered in the home brewers lounge thread -> https://www.evolutionary.org/forums/source-talk/homebrewers-lounge-part-2-a-34895.html

Personally, I would just order testosterone from one of the approved sources on the board. Especially if you are just doing TRT and using only 200mg/week, a vial of test will only cost you about 60 bucks and last you almost 3 months. That's pennies when you think of it. Why risk homebrewing and face huge legal consequences for importing raw hormones?

A properly run UG lab will have lab equipment that costs in the neighbourhood of a quarter million. No matter how good you are at home brewing, it will never match the quality of a properly run UG lab.

Ok bro i agree with you in some things but in other not.
I used for most years ug testo and more but never find a very good deal using ug testosterone, for me all are underdosed.
When i cycle i never have with 200mg weekly free testosterone up to2000 when i use ug, now using my own formule even painfull at 200mg weekly the free testosteron is on the roof 3200ng.
This means what i used were underdosed i think.
And sincerely i prefer to know how the things were sterilize etc.. And what i brew i am sure what i did.
Ok maybe some i am wrong considering my gears are painfull even at this small dosage, but i think i will improve.
About the legal compliance here, i am in europe so its more easy to obtain small amount of raw...

 

[jp4355]

What was the Mg/Ml concentration of your mix ?

EO causes problems for me personally ~ it Lumps-up under the Skin and causes pain for Weeks.................................. JP
P.S.
Could be the EO making you sick.

Have you ever tried a mix without EO.

I like 25% GSO and 75% Safflower as my Carrier Oils, don't need anything else.
Will hold 400 Mg/Ml ~ EQ.

 

[AddarInc]

Lol, I just buy it! Have fun brother making it. let us know the outcome

 

[stevesmi]

if you homebrew the danger is getting your raws seized. they are starting to clamp down i heard. lots of UGL's are going under because of that. thats why on evo we only allow approved sources

 

[aussiemaza78]

You dont need eo,

stick with the ba, bb and maybe try mct oil instead of gso

 

[magyar86]

What ester test did you make? Give me the exact amount in Ml you used and the amount of grams of raw you used. Likely the EO causing pip, some people don't do well with EO and allergic even. I would lower EO or completely remove it from the mix. If you keep your concentration to a normal range there isn't any need for it.


Sent from my iPhone using Tapatalk

 

[gearhead]

What ester test did you make? Give me the exact amount in Ml you used and the amount of grams of raw you used. Likely the EO causing pip, some people don't do well with EO and allergic even. I would lower EO or completely remove it from the mix. If you keep your concentration to a normal range there isn't any need for it.


Sent from my iPhone using Tapatalk

brother...no hard feelings...i know you an evo brother...but if you gotta ask these questions you should NOT be making steroids...shit is dangerous...you can get poisoned and literally die brother....

 

[magyar86]

brother...no hard feelings...i know you an evo brother...but if you gotta ask these questions you should NOT be making steroids...shit is dangerous...you can get poisoned and literally die brother....

Sorry I think you mis understood, I was asking so i could check is recipe to figure out why he is having the issues he is having. I have my own recipes from trial and error so I was going to lend a hand if his math or mixtures were way off. Thanks for looking out though brother, this stuff can be very dangerous and someone can get hurt very easily.


Sent from my iPhone using Tapatalk

 

[Masonic Bodybuilder]

I do not homebrew because of the legal risks associated with it. Although, it does seem like it would be fun! Personally I just do self TRT for now. I will eventually get on it through my doctor though.

 

[BodyEnergy]

Guys thank you for many replies.
My gear is testosterone enanthate
I did 250mg/ml sesame oil 1%ba 10bb hurts little bit
I did 250mg/ml gso 2/20 and it hurts
I did 300mg/ml 50/50 eo gso and 3% ba 20bb hurts.
The things is that everytime i pin i got flu simphtoms that dissapear in 1 day.
I did blood work on 200mg weekly after 3 weeks i got 3200ng so i think powder is good.
The reason why i added eo is because i read around the web that maybe helps to make gear painless....
Some months ago i used a ug gear from vermodje that didnt hurts at all completely painless, but i never had free testo so high with such small dosage

 

[BodyEnergy]

A curious thing that i noticed is if i put the gear in the oven for 30 min at 250f, the next day the gear is much more painless

 

[magyar86]

Just to double check please let me know how much of each you used. For example:

For 250 mg/ml test e
50ml total
12.5g powder
1ml ba (2%)
5ml bb (10%)
Oil 32.21 ml


Sent from my iPhone using Tapatalk

 

[jp4355]

I would check with your Raws Supplier.

Some Test Enanthate Raws have "Carbolic Acid" in them, and this causes PIP every time.

I know a few users who had Cellulitis caused by Test E........................................ JP
P.S.
There's a method to get rid of the Carbolic Acid, but it's involved, and takes some equipment to do successfully.

The other solution is to cut your finished Test E, with some Test C and inject.

 

[druby25]

I have really been wanting to get back into homebrewing but have lost all old raw suppliers, can anyone help me out and hook me up with a pm of a trusted raw supplier?

 

[Eddie Haskell]

...can anyone help me out and hook me up with a pm of a trusted raw supplier?

Discussing sources of raw powders. Oh boy!

 

[druby25]

I don't wanna discus it on the forum, just wanting someone to help me out so I'm not blowing my money, lol why I asked for a pm if anyone wanted to help out

 

[Eddie Haskell]

I don't wanna discus it on the forum, just wanting someone to help me out so I'm not blowing my money, lol why I asked for a pm if anyone wanted to help out

All right. All right. Geeze......

 

[druby25]

All right. All right. Geeze......

Sorry, wasn't trying to sound like a prick I just don't really wanna blow a few hundred dollars, also sorry to anyone if this seemed like I was trying to hijack a thread, just trying to obtain some solid info