Suspended Official KAOS - Reviews updates

[TeeGee]

most guys I know use these setups.. been victim to syringe barrel ink markings in vials many times. It's just not a ethical setup for large scale supply in my honest opinion.. very easy and affordable to get ahold of these. Set it to 11ml dispense to be kind and Bobs ya dad

 

[Wheelhouse87]

View attachment 89663most guys I know use these setups.. been victim to syringe barrel ink markings in vials many times. It's just not a ethical setup for large scale supply in my honest opinion.. very easy and affordable to get ahold of these. Set it to 11ml dispense to be kind and Bobs ya dad

Interesting bit of kit.. is it a pump style dispense?

 

[TeeGee]

Interesting bit of kit.. is it a pump style dispense?

Just a dispenser bro. Can obviously get different grades and sizes. But they take away the flaws involved with doing syringe dispensing.

I would constantly get the ink marks in vials.

These things are game changer in my opinion.

 

[Wheelhouse87]

Just a dispenser bro. Can obviously get different grades and sizes. But they take away the flaws involved with doing syringe dispensing.

I would constantly get the ink marks in vials.

These things are game changer in my opinion.

Yeah sorry I may not have worded my question properly.
Do you set it to the ML required and pump the handle to dispenser? Would be great if it was powered and you could just press a button to dispense into the vial

 

[TeeGee]

Yeah sorry I may not have worded my question properly.
Do you set it to the ML required and pump the handle to dispenser? Would be great if it was powered and you could just press a button to dispense into the vial

Exactly that bro. Just depends on what grade you get...

So the one I had from personal experience...

3ml - 15ml dispense when you pull the trigger upto where you want it basically sucks the oil up. Then push back down to dispense.

My mate has a battery operator one which you set the volume and press a button and it comes out automatically... I don't know alot of details about it though.

Plenty of options out there

 

[Wheelhouse87]

Exactly that bro. Just depends on what grade you get...

So the one I had from personal experience...

3ml - 15ml dispense when you pull the trigger upto where you want it basically sucks the oil up. Then push back down to dispense.

My mate has a battery operator one which you set the volume and press a button and it comes out automatically... I don't know alot of details about it though.

Plenty of options out there

Thanks for the clarification. Seems better then fluffing around with syringes

 

[coolguy77711]

View attachment 89663most guys I know use these setups.. been victim to syringe barrel ink markings in vials many times. It's just not a ethical setup for large scale supply in my honest opinion.. very easy and affordable to get ahold of these. Set it to 11ml dispense to be kind and Bobs ya dad

Damn that's a fancy piece of kit what's one of those bad boys set ya back must be thousands

 

[TeeGee]

Damn that's a fancy piece of kit what's one of those bad boys set ya back must be thousands

Depending where you purchased..

$250 - over a grand.

Lab supply in Sydney are top notch for high grade stuff

 

[coolguy77711]

Depending where you purchased..

$250 - over a grand.

Lab supply in Sydney are top notch for high grade stuff

Well you can't put a price on safety and accurate dosages.

 

[ODINLABS]

U

It's the black marker on these now days plastic syringes, starts to come off, as I said quality of even medical syringes is not like use too be in aus.

We've switched too glass syringes.. as we stated.. it can happen when your pumping out vials dude.. but now with glass, syringes issue is completely solved.

The plastic syringes dont hold up like they use too, likely now all Chinese shit in aus now.

It happened to couple deca vials as we stated, but caught them but when labelling boxing when your pumping them out it wears off and we caught few at the last end with a couple aswell, as we told you.

Had too crack open and refilter, few of them aswell.

You got caught out Unfortunately with one vial primo.

Apologies but as I said it's probably still fine to inject but of course a sent fresh vial, No issue as it's not good enough for our reputation and lab rep, we would replace anything that's a miss - not good enough for us, and it can happen.

But i will state - I've literally plugged whole chunks rubber from seal into myself as 19gauge cuts plugs terribly from preloadeds and probably have hundreds chunks in my glutes, ass, shoulders lats over the years and never a issue.

We've replaced your vial and it was only one out of your order, apologies bud and we've been fully transparent about it, as you spoke with threema rep.

Shit happens with UGL, we run auto electric vacuum pumps on top of a 4L top hold chamber too 10L catch thats runs 0.45um, then a sister open air breather valve that vacuums pumps from there and run too another 4L hold chamber that then runs through another 0.22um filter into a another 10L catch chamber.

And we have a couple these as filtering and messing with quiete a few compounds.

Unfortunately end of the day, after all this this is done, vials still have to be hand filled Manually.

We've switched too glass syringes for filling issues now rectified completel

anyone in the know, knows this is the norm (and actually quiete over kill on our part or filtration, but we have the systems and use them.

Anyone who says they have automation self filling machines that have recirculating autoclave tube self chemical tube cleaning filters that pumps that also clean lines & tube runs systems etc is full of shit. They cost 500k plus. Or more.

I apologised and re-placed that one vial brother.

And sorted the issue in full and thank you for bringing it up, as we are busy things go a miss. But have rectified.

Assure there's no sterility issue we do everything properly.

Any lab could chime in this is how's its done properly. But still everyone Manually has to still fill vials after filtration (but now using glass syringes for filling weve kinked out the issue to not happen again as we did notice it and thougg we caught all vials it happened too).

Every day is a new learning kerve and mistakes can always happen, just another kink we've ironed out.

Thank bro @Limbu for bringing it up aswell, as for any other lab, careful of some of the new Chinese medical supplies that are now Australia's norm.

Much Love

KAOS

USE AN ELECTRONIC PIPETTE GUN AND STERILE PIPETTES TO FILL VIALS BROTHER.

 

[R&Dpharma]

Damn that's a fancy piece of kit what's one of those bad boys set ya back must be thousands

Depending where you purchased..

$250 - over a grand.

Lab supply in Sydney are top notch for high grade stuff

about 1k you can get a decent dispensette for, filter directly from the beaker into this sterilised media bottle slap the dispensette directly on top

 

[ODINLABS]

View attachment 89663most guys I know use these setups.. been victim to syringe barrel ink markings in vials many times. It's just not a ethical setup for large scale supply in my honest opinion.. very easy and affordable to get ahold of these. Set it to 11ml dispense to be kind and Bobs ya dad

Wouldn't use this
Unless you plan on having a separate one for each compiund
As you will have to clean and sterilise it for each different compound as they will contaminate the other viaks with different compounds.
Again I don't use these their actual. Use is for one compound unless you have like 10 of them then they are great.
The most accurate is pipette gun and sterile one use pipettes

 

[KAOS Anabolics]

View attachment 89663most guys I know use these setups.. been victim to syringe barrel ink markings in vials many times. It's just not a ethical setup for large scale supply in my honest opinion.. very easy and affordable to get ahold of these. Set it to 11ml dispense to be kind and Bobs ya dad

Used these in the past and the pump system always breaks.

They don't last long..

Thee spring inside alwsys pops and youll compress ane they end up exploring everywhere, there cheap flimsy Asians crap.

Plus you have to clean the fucking thing everytime which is nere impossible, run Tren through it, contaminates everything.

You need like 20 of them for each conpound etc and they actually cost around 600 - 100p bucks peice.

 

[R&Dpharma]

Used these in the past and the pump system always breaks.

They don't last long..

Thee spring inside alwsys pops and youll compress ane they end up exploring everywhere, there cheap flimsy Asians crap.

Plus you have to clean the fucking thing everytime which is nere impossible, run Tren through it, contaminates everything.

You need like 20 of them for each conpound etc and they actually cost around 600 - 100p bucks peice.

you have a separate media bottle full of isopropyl alcohol flush that through the dispensette

 

[R&Dpharma]

Thanks for the clarification. Seems better then fluffing around with syringes

definitely bro especially when you're brewing a kg of test and have 380 vials to dispense couldn't imagine using a syringe

 

[R&Dpharma]

not having a dig at @KAOS Anabolics just different style very time consuming

 

[KAOS Anabolics]

you have a separate media bottle full of isopropyl alcohol flush that through the dispensette

100ml glass syringes costs $30

And easy to clean.

One suck up pump out 10 vials, in 2 seconds.

Mind you you also have to pick up and hold every vial for those disperseries, some times drop some etc.

One by one by pick up pump one by one pump.. drop one.

I believe we've found the perfect solution.

"Ain't nobody got time foe dat"

 

[ODINLABS]

100ml glass syringes costs $30

And easy to clean.

One suck up pump out 10 vials, in 2 seconds.

Mind you you also have to pick up and hold every vial for those disperseries, some times drop some etc.

One by one by pick up pump one by one pump.. drop one.

I believe we've found the perfect solution.

"Ain't nobody got time for that"

How do you clean it?
Use a pippette gun and pipette easier

 

[KAOS Anabolics]

They separate

How do you clean it?
Use a pippette gun and pipette easier

Will looking into this I might flick you a DM mate.

No cleaning just changing pipettes be great, never seen 10ml ones before though.

But in all honestly jabent even looked.

The Glass 100ml, pull apart into 2 peice

70% ethanol bath

And slap in to foily into auto clave.

 

[TeeGee]

U

USE AN ELECTRONIC PIPETTE GUN AND STERILE PIPETTES TO FILL VIALS BROTHER.

Very popular !!!