Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply US-PHARMACIES
UGL OZ UGFREAK OxygenPharm
napsgeargenezapharmateuticals domestic-supplyUS-PHARMACIESUGL OZUGFREAKOxygenPharm

Trusted Nordic Fusion Official - Reviews and Sales

Fusion Canada said:
We dont have much EQ left. I hate saying it on that one as well sigh. Might have a line on some amore but everything is such hearsay these days and no one has really come through yet. Whatever we do get will be posted though. hoping for some good news for you boys soon
Click to expand...
Thanks for keeping us updated @Fusion Canada. We know it's tough out there right now and that you're making every effort. Keep us posted bro.
 
@Scott40 posted TD pics for Team Fusion @Fusion Canada in LOG
https://www.evolutionary.org/forums/threads/2026-cycle-training-log.110012/post-2077139
Scott40 said:
Sure, touch down photo of some Nordic Test 400 and Mast enth. Switched from SyN product after my last bloods which are posted above. There was no more mast from them and I do like the t400 quite a bit for lower injection volume. This stuff has been incredibly smooth.

Blood work is booked again in about 3.5 weeks.
Click to expand...
img_2705-webp.233791
 
teddy_vio said:
Ethyl Oleate, I believe. Think it is used as the solvent/carrier for higher potency compounds. Hopefully I am using the correct terminology here. Think it is mentioned because some folks can have a sensitivity to it.
Click to expand...
correct :D
 
Whats good boys I just landed here. I'm out here in Ontario and I need a source for Anavar 10mg, Arimidex and Test E. I checked out Nordic, great menu, seems legit, love the community and feedback I've been reading but unfortunately both Var and Test E are out of stock. Any recommendations?
 
PepBro said:
Whats good boys I just landed here. I'm out here in Ontario and I need a source for Anavar 10mg, Arimidex and Test E. I checked out Nordic, great menu, seems legit, love the community and feedback I've been reading but unfortunately both Var and Test E are out of stock. Any recommendations?
Click to expand...
Welcome to evo bro, nf is a good lab for sure...if they are out have a look around I bevlive oxygen has both in stock if I'm not mistaken iv been loving there oils and dick pills.
 
PepBro said:
Whats good boys I just landed here. I'm out here in Ontario and I need a source for Anavar 10mg, Arimidex and Test E. I checked out Nordic, great menu, seems legit, love the community and feedback I've been reading but unfortunately both Var and Test E are out of stock. Any recommendations?
Click to expand...

@PepBro Nordic is solid no doubt, i really liked their masteron i used last year. Far from me the idea of name dropping another lab and hijacking Nordic's thread but @OxygenPharm is another approved source here and they do have all you are looking for at great prices.
 
PepBro said:
Whats good boys I just landed here. I'm out here in Ontario and I need a source for Anavar 10mg, Arimidex and Test E. I checked out Nordic, great menu, seems legit, love the community and feedback I've been reading but unfortunately both Var and Test E are out of stock. Any recommendations?
Click to expand...
NF is 100% good to go and has amazing good quality and perfectly dosed gear.

If they are out of stock head on over to @OxygenPharm our GOLD Tier supplier

You can get what you need from OxygenPharm here:

Anavar ➡️ https://oxygenpharmcanada.is/product/anavar-20mg-50-tabs/
TestE ➡️ https://oxygenpharmcanada.is/product/testosterone-enanthate-250mg-ml-10ml/
Arimidex ➡️ https://oxygenpharmcanada.is/product/arimidex-arimigen-1mg-50-tabs-2/
 
PepBro said:
Whats good boys I just landed here. I'm out here in Ontario and I need a source for Anavar 10mg, Arimidex and Test E. I checked out Nordic, great menu, seems legit, love the community and feedback I've been reading but unfortunately both Var and Test E are out of stock. Any recommendations?
Click to expand...
I think @Fusion Canada has some test in stock, did you check his sust? @PepBro

what is your cycle plan?
 
Last edited:
So we did get some mast enth in. Not much, but enough for another small batch. Made it up into batches as it was from our regular supplier. Its mast enth 100% as you see but the dosage was off 25mg a ml so we will adjust the price due to that to 125$ vs 150$ to make up for it being of that bit

Tests below. Any questions let me know

4c8c052a1ed325776b3a.webp
 
Fusion Canada said:
So we did get some mast enth in. Not much, but enough for another small batch. Made it up into batches as it was from our regular supplier. Its mast enth 100% as you see but the dosage was off 25mg a ml so we will adjust the price due to that to 125$ vs 150$ to make up for it being of that bit

Tests below. Any questions let me know

View attachment 235817
Click to expand...
Appreciate the transparency! Thank you @Fusion Canada !
 
Honesty will set you free. Plus we know respect has to be earned. Thats why we will be doing this with all products going forward. We do allow a +/-10% in mg/ml as its hard to be 100% exact. But anything under that we will adjust price. Anything over like the latest batch of enth is just lucky for you peeps
 
Fusion Canada said:
View attachment 235777View attachment 235778
Click to expand...

leaperfr said:
Re-postimg in this correct thread nordic fusion primo results from Jano. Dosed legitimately expected

View attachment 235800
Click to expand...

Fusion Canada said:
So we did get some mast enth in. Not much, but enough for another small batch. Made it up into batches as it was from our regular supplier. Its mast enth 100% as you see but the dosage was off 25mg a ml so we will adjust the price due to that to 125$ vs 150$ to make up for it being of that bit

Tests below. Any questions let me know

View attachment 235817
Click to expand...
Team NF for the WIN! @Fusion Canada love the janoshik tests and quality of your gear is unmatched!
 
We want to be fully transparent. Higher prices deserve that. And also we want to be known as honest an reliable. Thanks for the kind words @LevButlerov. We'll keep up the good work and will never disappoint our people here
 
Fusion Canada said:
We want to be fully transparent. Higher prices deserve that. And also we want to be known as honest an reliable. Thanks for the kind words @LevButlerov. We'll keep up the good work and will never disappoint our people here
Click to expand...
Higher prices due to high demand and low stock and high cost its reasonable :D @Fusion Canada EVO family love and support your way!
 
Fusion Canada said:
We want to be fully transparent. Higher prices deserve that. And also we want to be known as honest an reliable. Thanks for the kind words @LevButlerov. We'll keep up the good work and will never disappoint our people here
Click to expand...
And honest and reliable is what Nordic Fusion is known for @Fusion Canada and you continue to deliver the honesty. Love all this.

If you look back to my log from early Spring of last year I've loved Nordic Fusion for many many years and know you are tried tested and true to your word and back it up for the non-believers too!
 
@0riginalrelica posted TD pics for Team @Fusion Canada in Log
https://www.evolutionary.org/forums/threads/test-cycle-training-log.110662/post-2083742
0riginalrelica said:
Updated Log:

I ordered 5 vials of Oxygen Test Cyp, 4 packs of Nordic Fusion Proviron, 1 pack of Nordic Fusion Aromasin.

Supplements -
  • Vitamin D3 - 7,500 IU
  • Kirkland Salmon Fish Oil
  • Magnesium 200mg Before bed
  • Naka NAC 600mg
  • Allmax TUDCA 250mg
  • Revive Liver
  • Kirkland Men's Multi Vitamin
  • Psyllium Husk - 3 teaspoon a day
  • Mother Earth Apple Cider Vinegar - 2 tablespoons a day
  • C4 Ultimate - Take about 3/4 scoop
  • Creatine 5g daily
  • Waiting on an order for Bio-K Plus Probiotic

I've been feeling really bloated and constipated and overall been having an uneasy stomach for the last 2 weeks. Since I've gotten on Psyllium husk and Apple Cider Vinegar, about a week ago, it seems to have done the trick, for the most part. I read that high Estradiol can lead to bloating which is what I have. The good news is my Testosterone is solid now.
Click to expand...
20260526_105838-webp.237845

20260526_105848-webp.237846
 
Heres the recent test from the new enth we got. Its 80% but we are able to tailor to make sure its on poin for 250mg/ml. Again just making sure our followers know were on the ball and being transparent. We'll send tests fir this batch once its cooked up
 

Attachments

  • c5b0ef7c1bd096ac0d39.webp
    c5b0ef7c1bd096ac0d39.webp
    100.7 KB · Views: 81
Fusion Canada said:
Heres the recent test from the new enth we got. Its 80% but we are able to tailor to make sure its on poin for 250mg/ml. Again just making sure our followers know were on the ball and being transparent. We'll send tests fir this batch once its cooked up
Click to expand...
Great transparency and ongoing quality control @Fusion Canada!
 
Fusion Canada said:
Heres the recent test from the new enth we got. Its 80% but we are able to tailor to make sure its on poin for 250mg/ml. Again just making sure our followers know were on the ball and being transparent. We'll send tests fir this batch once its cooked up
Click to expand...
EVO family respect for coming out with the info and testing :D @Fusion Canada many labs dont test but you do showing your quality to the industry!
 
bigbc said:
Yes they do, that test result is for test e powder.
Click to expand...
Yes my bad, I was going too fast and thought he tested a finished product vial.

I'll have @Fusion Canada pipe in on this one. Doesn't mean the raw can't be used.
 
BritishCanadian said:
Dont raws come as powder?
Click to expand...
Its basically the % of raws per gram if you think about it like this 100 grams of the powder would give him 82 grams of test, so he has to adjust as he creates the products :D
 
LevButlerov said:
Its basically the % of raws per gram if you think about it like this 100 grams of the powder would give him 82 grams of test, so he has to adjust as he creates the products :D
Click to expand...
Great summary of this.

Rest assured all @Fusion Canada knows what he's doing.
 
bigbc said:
such a low purity never seen it that low before what do you think the other 18% in the raw is?
Click to expand...
TBH im not sure what the other 18% is. I would assume its leftover of a product that is used to make the test. And honestly i will ask after seeing this question purely out of interest myself. All i know is that its not 100% pure but the test is test and is lower quality so that if we made it it would come back at say 80mg/ml if making 100mg/ml bottle. So what we do to ensure vials are to the mg is overdose it 25% to make up the missing percentage. Not the first time we've done this and it comes back mg for mg.

We will still be testing final products after they are whipped up and before they are bottled to ensure its what you're paying for.

Thats the best I got for you right now and hope it answers it to your satisfaction.
 
Fusion Canada said:
TBH im not sure what the other 18% is. I would assume its leftover of a product that is used to make the test. And honestly i will ask after seeing this question purely out of interest myself. All i know is that its not 100% pure but the test is test and is lower quality so that if we made it it would come back at say 80mg/ml if making 100mg/ml bottle. So what we do to ensure vials are to the mg is overdose it 25% to make up the missing percentage. Not the first time we've done this and it comes back mg for mg.

We will still be testing final products after they are whipped up and before they are bottled to ensure its what you're paying for.

Thats the best I got for you right now and hope it answers it to your satisfaction.
Click to expand...
Hope this reply helps @bigbc

You can count on @Fusion Canada he knows his way around a lab.
 
I will say it is funny to me. I post reports of overdosed stuff and no complaints. I post a raw report and theres some doubt. Cant get much more transparent than this guys. We're doing our best here and showing everything coming your way.
 
Fusion Canada said:
I will say it is funny to me. I post reports of overdosed stuff and no complaints. I post a raw report and theres some doubt. Cant get much more transparent than this guys. We're doing our best here and showing everything coming your way.
Click to expand...
It's so appreciated and I don't see this honesty anywhere else.
 
dinovf1 said:
TD of @Fusion Canada This was ordered on Thursday. Shipping out tomorrow, but I somehow got it yesterday. You do the math.
Click to expand...
Amazing shipping speed and customer care from @Fusion Canada bro!
Great touchdown too Nordic Fusion anavar is very pure I've used it a dozen times!
 
HarleyGuy said:
Hope this reply helps @bigbc

You can count on @Fusion Canada he knows his way around a lab.
Click to expand...
I want to say im not starting any drama and im actully a fan of NF and have used lots of his test and still have some of his gear on hand.

I have some experience with manufacturing injectable products for cattle and horses years and years ago when I worked as a helping hand in the company and I remember being asked to discard B12 and B complex raw powder because the lab report came back @95% and that's for animals so I'm just saying its kinda questionable when the raw purity is 80% that's all Im not trying to make a beef here what so ever.

This is what chatGPT said when I asked.


This is a major quality and safety issue.

Testosterone enanthate powder at only 80% purity means 1 out of every 5 parts of the material is not confirmed to be Test E. That is a serious red flag, especially for anything intended for injectable use.

1. Unknown 20% impurity

The main concern is the unknown 20%. It could include leftover solvents, synthesis byproducts, heavy metals, degradation compounds, fillers, isomers, or other unwanted material.

Without proper testing, there is no reliable way to know what that remaining portion actually is.

2. Health risks from impurities — the 20% “other stuff”

Heavy metals and contaminants:
Low-quality raw powders may contain contaminants such as lead, arsenic, cadmium, residual solvents, or manufacturing byproducts. These types of contaminants are serious because they can be linked to long-term health risks, including organ stress, neurological issues, cardiovascular harm, and cancer risk.

Unknown compounds:
The impurity portion could include synthesis intermediates, degraded compounds, unwanted isomers, bacteria, endotoxins, or fillers. If these end up in an injectable product, they can increase the risk of post-injection pain, swelling, inflammation, abscesses, infection.


3. Injection-site reactions

Low-purity material can significantly increase the chance of irritation after injection. This may lead to pain, swelling, inflammation, hard lumps, sterile abscesses, or allergic-type reactions.

4. Particulate contamination

Poor-quality powder may contain undissolved material or contaminants that should not be present in an injectable product. This can make the final product look cloudy, gritty, unstable, or irritating to tissue.

5. Effectiveness and stability issues

Lower purity often means the material may be degraded, oxidized, poorly manufactured, or contaminated. This can reduce potency further over time, especially if the powder changes color, clumps, smells unusual, or does not dissolve properly.

Poor solubility can also lead to unstable or painful injections, including higher post-injection pain and more irritation.

Variable batches make consistent results impossible without proper lab testing, such as HPLC testing and a legitimate certificate of analysis from a reputable source.

Bottom line

80% purity is not a small issue. It is a major red flag.

For injectable use, the standard needs to be much higher because the unknown 20% creates real risks around contamination, irritation, unpredictable potency, injection reactions, and long-term health consequences.

This should be treated as a serious quality-control failure, not as a minor dosing difference.
 
bigbc said:
I want to say im not starting any drama and im actully a fan of NF and have used lots of his test and still have some of his gear on hand.

I have some experience with manufacturing injectable products for cattle and horses years and years ago when I worked as a helping hand in the company and I remember being asked to discard B12 and B complex raw powder because the lab report came back @95% and that's for animals so I'm just saying its kinda questionable when the raw purity is 80% that's all Im not trying to make a beef here what so ever.

This is what chatGPT said when I asked.


This is a major quality and safety issue.

Testosterone enanthate powder at only 80% purity means 1 out of every 5 parts of the material is not confirmed to be Test E. That is a serious red flag, especially for anything intended for injectable use.

1. Unknown 20% impurity

The main concern is the unknown 20%. It could include leftover solvents, synthesis byproducts, heavy metals, degradation compounds, fillers, isomers, or other unwanted material.

Without proper testing, there is no reliable way to know what that remaining portion actually is.

2. Health risks from impurities — the 20% “other stuff”

Heavy metals and contaminants:
Low-quality raw powders may contain contaminants such as lead, arsenic, cadmium, residual solvents, or manufacturing byproducts. These types of contaminants are serious because they can be linked to long-term health risks, including organ stress, neurological issues, cardiovascular harm, and cancer risk.

Unknown compounds:
The impurity portion could include synthesis intermediates, degraded compounds, unwanted isomers, bacteria, endotoxins, or fillers. If these end up in an injectable product, they can increase the risk of post-injection pain, swelling, inflammation, abscesses, infection.


3. Injection-site reactions

Low-purity material can significantly increase the chance of irritation after injection. This may lead to pain, swelling, inflammation, hard lumps, sterile abscesses, or allergic-type reactions.

4. Particulate contamination

Poor-quality powder may contain undissolved material or contaminants that should not be present in an injectable product. This can make the final product look cloudy, gritty, unstable, or irritating to tissue.

5. Effectiveness and stability issues

Lower purity often means the material may be degraded, oxidized, poorly manufactured, or contaminated. This can reduce potency further over time, especially if the powder changes color, clumps, smells unusual, or does not dissolve properly.

Poor solubility can also lead to unstable or painful injections, including higher post-injection pain and more irritation.

Variable batches make consistent results impossible without proper lab testing, such as HPLC testing and a legitimate certificate of analysis from a reputable source.

Bottom line

80% purity is not a small issue. It is a major red flag.

For injectable use, the standard needs to be much higher because the unknown 20% creates real risks around contamination, irritation, unpredictable potency, injection reactions, and long-term health consequences.

This should be treated as a serious quality-control failure, not as a minor dosing difference.
Click to expand...
we cant talk to chatgpt sorry, only if you can put up your question in your own words the convo is fair.
 
bigbc said:
I want to say im not starting any drama and im actully a fan of NF and have used lots of his test and still have some of his gear on hand.

I have some experience with manufacturing injectable products for cattle and horses years and years ago when I worked as a helping hand in the company and I remember being asked to discard B12 and B complex raw powder because the lab report came back @95% and that's for animals so I'm just saying its kinda questionable when the raw purity is 80% that's all Im not trying to make a beef here what so ever.
Click to expand...
This is what I read and I'm listening...
(I don't read AI)

If you have a question for NF post it here bro. It's a good question what to do with 80% raws.
 
HarleyGuy said:
This is what I read and I'm listening...
(I don't read AI)

If you have a question for NF post it here bro. It's a good question what to do with 80% raws.
Click to expand...
It sounds to me (and im just guessing) that the raw suppliers are stepping on the product to make it go further on their end. I would be surprised if the cut is anything harmful...but who knows?
 
bigbc said:
I want to say im not starting any drama and im actully a fan of NF and have used lots of his test and still have some of his gear on hand.

I have some experience with manufacturing injectable products for cattle and horses years and years ago when I worked as a helping hand in the company and I remember being asked to discard B12 and B complex raw powder because the lab report came back @95% and that's for animals so I'm just saying its kinda questionable when the raw purity is 80% that's all Im not trying to make a beef here what so ever.

This is what chatGPT said when I asked.


This is a major quality and safety issue.

Testosterone enanthate powder at only 80% purity means 1 out of every 5 parts of the material is not confirmed to be Test E. That is a serious red flag, especially for anything intended for injectable use.

1. Unknown 20% impurity

The main concern is the unknown 20%. It could include leftover solvents, synthesis byproducts, heavy metals, degradation compounds, fillers, isomers, or other unwanted material.

Without proper testing, there is no reliable way to know what that remaining portion actually is.

2. Health risks from impurities — the 20% “other stuff”

Heavy metals and contaminants:
Low-quality raw powders may contain contaminants such as lead, arsenic, cadmium, residual solvents, or manufacturing byproducts. These types of contaminants are serious because they can be linked to long-term health risks, including organ stress, neurological issues, cardiovascular harm, and cancer risk.

Unknown compounds:
The impurity portion could include synthesis intermediates, degraded compounds, unwanted isomers, bacteria, endotoxins, or fillers. If these end up in an injectable product, they can increase the risk of post-injection pain, swelling, inflammation, abscesses, infection.


3. Injection-site reactions

Low-purity material can significantly increase the chance of irritation after injection. This may lead to pain, swelling, inflammation, hard lumps, sterile abscesses, or allergic-type reactions.

4. Particulate contamination

Poor-quality powder may contain undissolved material or contaminants that should not be present in an injectable product. This can make the final product look cloudy, gritty, unstable, or irritating to tissue.

5. Effectiveness and stability issues

Lower purity often means the material may be degraded, oxidized, poorly manufactured, or contaminated. This can reduce potency further over time, especially if the powder changes color, clumps, smells unusual, or does not dissolve properly.

Poor solubility can also lead to unstable or painful injections, including higher post-injection pain and more irritation.

Variable batches make consistent results impossible without proper lab testing, such as HPLC testing and a legitimate certificate of analysis from a reputable source.

Bottom line

80% purity is not a small issue. It is a major red flag.

For injectable use, the standard needs to be much higher because the unknown 20% creates real risks around contamination, irritation, unpredictable potency, injection reactions, and long-term health consequences.

This should be treated as a serious quality-control failure, not as a minor dosing difference.
Click to expand...
I get it and zero offence taken man, It made me want to know exactly what it is as well. With this item it did stay in transport for waaaaaay longer than it should have. Like months. So with raws, if its not stored properly, they can oxidize and quality goes down. I was leaning towards that aspect that the quality could diminish and results go to 80%. But after your post I do want to know for sure as it is my job to know these things. So I sent the supplier an email asking for clarification. And i hope to get something decent to post here

Nothing wrong with asking questions. Most people dont do that these days. Its actually an important part of life as long as its respectful, constructive and to the point.
 
@Scott40 posted TD pics in Log for Team NF @Fusion Canada

https://www.evolutionary.org/forums/threads/2026-cycle-training-log.110012/post-2089792
Scott40 said:
Quick update. Still going strong on training and the diet. Did have to go a bit lighter on upper body for a couple weeks due to elbow injury but it seems to have subsided with the help of some bpc/tb combo. It’s really only bothering my on bicep curl now so I have been avoiding that a bit.

Iv also made some changes to my compounds. I have dropped the AI (Aromasin) and added in some Primo to see how that shows on my next blood work which is in just under 2 weeks.

Iv also added in some HGH

I do feel like the last two weeks have been my biggest jump in progress in awhile. Can’t see it being the compounds but I do feel fantastic.

My blood pressure is also trending downward constantly as weight as dropped and is averaging 122/89 now vs 135/95+ like it was a few months ago and I haven’t seen any of the big spikes I was seeing. I’m logging this daily and sometimes twice a day. Iv added beat juice to my daily supplements. Man it’s gross but it’s supposed to be good so I’m on it.

Adding a couple photos. Mid section is much tighter, I think the last photos I posted I was around 214lbs. I’m at 192lbs today. Quite different from the 232lbs was on January 1st. I feel like I have put on some muscle tissue to. I have veins in my arms and shoulders that I have never see even the last time I was lean in 2014.

Just need to continue grinding.
Click to expand...
img_3040-webp.241513
 

Attachments

  • 02Jun NF Nordic Fusion JANO MastE.webp
    02Jun NF Nordic Fusion JANO MastE.webp
    99.1 KB · Views: 10
Last edited:
He sure did. We are running out of primo fast, After this thats that. We did however get some more mast enth in peeps. So that will be rolling for awhile longer still :)
 

Attachments

  • 02Jun NF Nordic Fusion JANO MastE.webp
    02Jun NF Nordic Fusion JANO MastE.webp
    99.1 KB · Views: 9
Fusion Canada said:
He sure did. We are running out of primo fast, After this thats that. We did however get some more mast enth in peeps. So that will be rolling for awhile longer still :)
Click to expand...
primobolan almost out :D everyone jump on!
 
You must log in or register to reply here.

Similar threads

S
  • Locked
Southern Cross Labs INTRO SALE - Oils , Orals & Peptides - HPLC Test E 250 $75 and more
Replies
28
Views
2K
Southern Cross Labs
S
P
Suspended Peptilia- New Vendor Intro
Replies
71
Views
3K
Eddie Haskell
Eddie Haskell
S
SOUTHERN CROSS LABS - INTRO THREAD
2 3 4 5 6 7 8 9 10
Replies
950
Views
32K
wolf85
W
D
Suspended DRAGON PHARMACEUTICALS - OZ - AUSSIE - DOMESTIC SOURCE NEW VENDOR - PRICELIST & UPDATES
Replies
53
Views
6K
AusMade
AusMade
O
Onyx Labs - Intro Thread
Replies
55
Views
2K
Mantic
Mantic
Back
Top Bottom