Please Scroll Down to See Forums Below 
Very thankful for this thread, future sources are going to come out of this.
- Status
bobsyouruncle
Buff Brother
Vee gee no.20229 glass beakers,a stirr rod (I use a long glass thermometer),empty presealed sterile vials,20ml syringes,syringe filters,18g needles,ba,bb,eo,safflower,grapeseed oil,a heating element (stove), an accurate scale, hormone powder this is more than you actually need and I included whatever I have stashed away and unopened in the pics but you can do without the eo,and you only need one type of carrier oil
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
devildog
Evolutionary Retired
From our resident compounding Pharmacist!
meathead96
Advanced Cyborg Brother
No PIP from it when I pin it but after it cools again it crashes
Sent from my iPhone using Tapatalk
krazieone56
New Member
That is strange. Maybe your body heat keeps it from crashing.
KRAZIEONE
KRAZIEONE
Easy find on Amazon or Ebay, take your pick.
devildog
Evolutionary Retired
By far the best one stop shop I've found!
bobsyouruncle
Buff Brother
krazieone56
New Member
Lol. Ya medlabsupply has everything you need. One stop shop.
KRAZIEONE
KRAZIEONE
dirtydeed
Cyborg Humanoid Brother
Lol....ya there's nothing like sittin back & admiring that little bottle of golden fluid you just created
Sent from my HTC One VX using Tapatalk
bobsyouruncle
Buff Brother
As exciting as it is remember sterility is your #1 priority
Sent from my iPhone using Tapatalk
devildog
Evolutionary Retired
SAME HERE! A sterile abscess can be serious problems..
No way...everybody needs to experience try to filter 100ml through a Whatman...we cant take that away from them! LOL
dinkleberg
New member
What kind of pump?
krazieone56
New Member
Ya first timers listen up. Its a rule and a tradition to filter your first batch by hand.
KRAZIEONE
KRAZIEONE
bobsyouruncle
Buff Brother
A caulk gun and some fender washers like I said Home Depot
Sent from my iPhone using Tapatalk
devildog
Evolutionary Retired
I did it with syringe filters, and no,caulk gun.
That was with the old Finaplex pellets, and the conversion kits that were being sold everywhere back then. Yes, fillers from the pellets would clog the filters, they'd crack, creating a small Exxon Valdez, plus the SORE fingers/hands. Whatman bottle tops for me all day. Lol
Atrox
Growing Brother
LOL you guys are too funny. I'm a long way from needing to homebrew, and can't afford to experiment. I am seriously impressed with you all. There is so much more to gear and the level of knowledge to be safe than I ever dreamed.
Still, how cool would it be to have your own lab with all the bells and whistles. You could tell people "Oh sorry I didn't get your call...I was in my lab."
Still, how cool would it be to have your own lab with all the bells and whistles. You could tell people "Oh sorry I didn't get your call...I was in my lab."
devildog
Evolutionary Retired
LOL!!!!! I was reading a few pages back, and stumbled on this one! LOL!!! Btw, have you made water based winny, or test? This is the project I'll be working on. Test suspension, tren suspension, and winny. Not a mix. each separate. All 50mg/ml to keep crashing to a minimum, but still a decent dose per ml.
bobsyouruncle
Buff Brother
I haven't played with any water suspensions it seems that a lot of bros look to me when it comes to homebrewing I have a lot to learn just like everyone else I will say that no mater what I decide I'm going to do I do it until it's perfect anything less is unacceptable that being said I would like this info as well why use a big oil cannon if you can get away with using a 29g slin pin
Sent from my iPhone using Tapatalk
bobsyouruncle
Buff Brother
How bout 75mg tren 50mg test in eo only?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
devildog
Evolutionary Retired
I've thought about that to help knockout pip, but I'm really wanting to stick with the water based with these compounds as it hits me faster.
bobsyouruncle
Buff Brother
I can appreciate that I would like to see a test/tren mix if it would hold in water great but I doubt it would when my shipment comes in I'll play around a little I want what everyone wants a badass preworkout powerhouse I wonder how much faster a water suspension will hit you than an oil base no ester
Sent from my iPhone using Tapatalk
krazieone56
New Member
Probly faster. Because your body would absorb the water quickly
KRAZIEONE
KRAZIEONE
devildog
Evolutionary Retired
From what I'm finding out, it's best to use the recipe with the polysorbate 80 for the water based suspensions. It's pretty cheap from med supply.
devildog
Evolutionary Retired
Here's the post about suspension I'll be using. I'll either stick with the 75mg/ml recipe, but may go down to 50mg p/ml as I don't mind the extra ML's, but do mind if it crashes.
Atrox
Growing Brother
Bob, earlier you posted your process for capping Viagra. Can you post up the basic formula for computing dosage per cap using a powder and filler? I'm kind of lost here, but a simple manual capping machine isn't too expensive, and I thought "why not?" But the measuring and mixing part of the process worries me. Calculating qty needed for a given dose, say 20mg and then mixing it with filler and getting even distribution would appear to be the most important part.
devildog
Evolutionary Retired
Wanted to throw this out there as well. Calculator makes the oils process too easy: http://www.everydayfitness.net/steroid-powder-calculator.html
bobsyouruncle
Buff Brother
It's tricky and depending on what filler you use and what compound you use it will all vary you need to figure out your powders density so you need to completely fill caps with the compound to be used and weigh them then you do the same with your filler once you have these numbers you can figure out how many mg's you want of the active compound per cap and you will know what volume it will take up in the cap you will also be able to figure out how much filler you need I like to keep my total just shy of max capacity so for instance yesterday I capped 100 50mg clomid caps so I took 5g clomid and once I had all of my numbers I found that it would take 7.2g of filler along with the 5g clomid to fill 100 caps to capacity I used 5g clomid and 6.9g filler (to fill them all to capacity is a pain in the ass but you want it to be extremely close for even dosing) I do t know if this helps the math can be tough at times and it's different every time depending on many variables capping is great but if math isn't your strong suit you should steer clear a lot of these compounds are taken in very small doses you don't want to fuck up
Sent from my iPhone using Tapatalk
Redam
Banned
There's tons of good info here! Take the time to read what everyone said and enjoy!
Also feel free to make a thread introducing yourself
bobsyouruncle
Buff Brother
I wish there was a calculator to figure out capping doing the math on it takes almost as long as the actual mixing/capping sometimes you get lucky and you can find a filler with the same density and volume as your active compound but that's about as common as a leprechaun sighting anyway just a list if compounds and their weight by volume would be helpful maybe I'll make a chart one of these days probably not anytime soon I'm running short on time these days
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
krazieone56
New Member
Why do you need a calculator? Don't u just fill the pill casing to top ? I only ask cause I have never done it.
KRAZIEONE
KRAZIEONE
bobsyouruncle
Buff Brother
No way man lets take viagra a size 4 capsule will take about 127mg completely full so that's on par with correct dosing however lets look at something like nolva or var where you might want 25mg/cap if you fill the caps completely they will be way overdosed and you can't measure out 25mg for each cap and fill them one by one so you need to figure out how much filler along with how much active compound you need in total to fill all caps to the top but keep the dosage at 25mg of active compound
Sent from my iPhone using Tapatalk
bobsyouruncle
Buff Brother
I was curious and I just looked at the first post on this thread as well as the trading thread this thread is about 50posts short of the trading thread but the trading thread has been up and running about 2-1/2months longer it's exciting to see how well this thread is doing!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
That is exciting! Its too bad this couldnt be separated into sections, if it is going to go like this the thread will get very fragmented.
Philisophical question Bros.....I have a 100 grams of Test Enanthate I am just dying to give away, hahahaha What should us more established members do with it to stimulate, excite, and tittilate new potential brewers?
Any ideas? Lets make it a group decision..or fuck the newbs lets split this shit up!!! LOL
Any ideas? Lets make it a group decision..or fuck the newbs lets split this shit up!!! LOL
bobsyouruncle
Buff Brother
[Q UOTE=mh48500;77863]Philisophical question Bros.....I have a 100 grams of Test Enanthate I am just dying to give away, hahahaha What should us more established members do with it to stimulate, excite, and tittilate new potential brewers?
Any ideas? Lets make it a group decision..or fuck the newbs lets split this shit up!!! LOL[/QUOTE]
After the mass oral special and the esterless wonders test e just seems a little un exciting I mean no disrespect I'm just trying to voice my opinion it may be a good idea to give x ammount away to a predetermined number of bros that have never brewed with the agreement that they will brew it and run it along with their next cycles I think they should start a thread or just piggyback on this one and write about their ratios any problems they may encounter the pip (if any) and the quality of their own homebrewed gear I honestly think that would help push the homebrewing movement on this site more than anything else could
Sent from my iPhone using Tapatalk
Any ideas? Lets make it a group decision..or fuck the newbs lets split this shit up!!! LOL[/QUOTE]
After the mass oral special and the esterless wonders test e just seems a little un exciting I mean no disrespect I'm just trying to voice my opinion it may be a good idea to give x ammount away to a predetermined number of bros that have never brewed with the agreement that they will brew it and run it along with their next cycles I think they should start a thread or just piggyback on this one and write about their ratios any problems they may encounter the pip (if any) and the quality of their own homebrewed gear I honestly think that would help push the homebrewing movement on this site more than anything else could
Sent from my iPhone using Tapatalk
bobsyouruncle
Buff Brother
And by all means when you're hacking it up feel free to send a Baggie my way
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
krazieone56
New Member
After the mass oral special and the esterless wonders test e just seems a little un exciting I mean no disrespect I'm just trying to voice my opinion it may be a good idea to give x ammount away to a predetermined number of bros that have never brewed with the agreement that they will brew it and run it along with their next cycles I think they should start a thread or just piggyback on this one and write about their ratios any problems they may encounter the pip (if any) and the quality of their own homebrewed gear I honestly think that would help push the homebrewing movement on this site more than anything else could
Sent from my iPhone using Tapatalk[/QUOTE]
Oh no I feel ya. I'm thinking no ester compounds with daily injections are the way of the future. I don't want two week esters anymore lol
But I'll take some if you are giving it away. Lol.
KRAZIEONE
krazieone56
New Member
bobsyouruncle
Buff Brother
I'm currently sitting on a small stockpile of test e I love long esters I just think the only way to get guys excited about it is to have them agree to try brewing it and record and share everything
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Bob has spoken! I understand what you mean...lol. I like your idea though about giving it out amongst some new Bros with the agreement that they will try to brew, post their experiences, etc. It would be nice tool to promote the lounge.
I am going to send this 100 grams over to a special VIP then and once we get settled in a bit more here I will be happy to offer it again with the idea of getting some new guys involved.
I got you covered Bob, I will hit you with a little Test Prop as a thank you with the current order.
I am going to send this 100 grams over to a special VIP then and once we get settled in a bit more here I will be happy to offer it again with the idea of getting some new guys involved.
I got you covered Bob, I will hit you with a little Test Prop as a thank you with the current order.
krazieone56
New Member
I'm in. But you know I already know how to do it. I fixed that cyp I made it holds at 140ml. 500 mg/ml.
KRAZIEONE
KRAZIEONE
Krazie what was the ratio on that mix?
krazieone56
New Member
Well I told the whole story I think you saw. So after tinkering trying to keep it from crashing. 3%ba I bumped it to 20% bb. And the rest eo no other oil. Not sure how it will shoot yet. Cause I'm out of filters so its sitting in 100ml vial and a couple 10's. I will have a new set of filters here soon and a vaccum pump for filtering.
KRAZIEONE
KRAZIEONE
devildog
Evolutionary Retired
I agree. And I'll be compounding a 200mg/ml Depo Test (Cyp) next week. I have the numbers that Pfizer and Watson use to compound at that dose. In addition, I'll be using Sesame oil for one run, then cottonseed which is what the Pfizer brand uses. Here's a good read on what they use for this very popular brand: http://labeling.pfizer.com/ShowLabeling.aspx?id=548
Sorry, Im once again sleep deprived....3 full days and nights.
Let us know how it shoots.
bobsyouruncle
Buff Brother
devildog
Evolutionary Retired
Hey, I like prop too! Lol!!! J/k.
GringoLoco
New member
Got a couple hundred grams of raws last week and my chems/filters/vials/clean room suit are coming on monday.. Gonna be a good week!
devildog
Evolutionary Retired
Funny you say that. I wear a gown, head cover, mask, and gloves that I tape to the sleeves of the gown. I do all this after taking a shower, then scrubbing my hands and forearms with a surgical scrub. Once my Son goes to school, I'll put on some music, and get down to business.
bobsyouruncle
Buff Brother
Funny you say that. I wear a gown, head cover, mask, and gloves that I tape to the sleeves of the gown. I do all this after taking a shower, then scrubbing my hands and forearms with a surgical scrub. Once my Son goes to school, I'll put on some music, and get down to business.
Painters suit Home Depot works great you can pick up nitrile or latex gloves there too
Sent from my iPhone using Tapatalk
devildog
Evolutionary Retired
I never thought about that. I used to date a gal who's a pharmacist. We still talk, which is odd, but lol. She got me several "kits" that have been cool. I'll open the bag, and everything is ready to out on. Btw, we're probably overkill with what we're doing, but I like quality, and sterile product. She told me she sees compounding being done with just a lab coat being used Lol! We're probable using better technique than licensed compounding pharmacies. Lol!
devildog
Evolutionary Retired
Btw, my birthday is rather close by: http://www.aircleansystems.org/process_vertical.htm
bobsyouruncle
Buff Brother
20 ml TNE @ 50 mg/ml
1 gram Test Base powder
2 ml benzyl benzoate ( 10%)
0.2 ml benzyl alcohol (1%)
0.6 ml polysorbate80 (3%)
14.8 ml destilled water
Sent from my iPhone using Tapatalk
1 gram Test Base powder
2 ml benzyl benzoate ( 10%)
0.2 ml benzyl alcohol (1%)
0.6 ml polysorbate80 (3%)
14.8 ml destilled water
Sent from my iPhone using Tapatalk
bobsyouruncle
Buff Brother
^ this was a cut and paste I'm not sure why it doesn't ask for bac water does anyone have any ideas as to how to get tren ne into a suspension?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
devildog
Evolutionary Retired
I've found out that bact water can be used, but is unnecessary. Also, page 27 of this thread are the test no ester recipes. I'll be using a variation of the recipes I posted for tren susp in p27 here, and will post the exact numbers when I get a stable, sterile, potent pre workout, weight throwing formulation. Ooh rah!
bobsyouruncle
Buff Brother
You'll be helping a lot of bros out with those numbers
Sent from my iPhone using Tapatalk
devildog
Evolutionary Retired
Will be glad to help! And a tren suspension... That's pre workout wicked! Lol!
bobsyouruncle
Buff Brother
That's what I'm thinking I'd like to have both test and tren in suspension vs oil just a small 29g pin preworkout I can't even feel those little guys and the gear dosnt ooze out of that little hole like it can with larger gauge short pins
Sent from my iPhone using Tapatalk
krazieone56
New Member
Are u going to be making them together in one tne and trne or two bottle separate recipes and then load the needle from both bottles 50 mg each and hit the gym?
I would defiantly like the recipe once you work it out.
KRAZIEONE
bobsyouruncle
Buff Brother
It sounds like dd is planning on two individual batches each a different compound I am hoping to take his findings and tweak them until I can get a blend to hold if I succeed I will definitely share my findings
Sent from my iPhone using Tapatalk
krazieone56
New Member
Nice. It would defiantly be epic
KRAZIEONE
KRAZIEONE
devildog
Evolutionary Retired
Separate bottles. This is the ONLY way I fly. Once it's mixed, you're stuck with it. I like being able to be extremely precise.
devildog
Evolutionary Retired
Yes. Will be doing two separate compounds in separate bottles. A blend is always fine. I'm just into grabbing what I need, and filling syringes from separate vials.
GringoLoco
New member
DUUUUUUDE I build something like this out of a big rack, intake/exhaust fans w/HEPA filters, and plexiglass when I was younger for keeping things clean when taking apart CPU hard drives, I really need to make another for brewing gear
devildog
Evolutionary Retired
Again, my birthday is coming up, and this would be a good one for a gift! Lol!!!
krazieone56
New Member
This thread is 38 pages long lol. If a new guy came here looking to learn. He would probly pass out before reading it all. It would take all night lol
KRAZIEONE
KRAZIEONE
dinkleberg
New member
I've seen something similar mycologist use....
bobsyouruncle
Buff Brother
So you've stated that you have used IV drugs in the past and I believe it is safe to say with this last statement you are ordering syringes full of spores and injecting them into mycelium and placing in big Tupperware tubs? I'm onto you buddy we may have more in common than you think
Sent from my iPhone using Tapatalk
bobsyouruncle
Buff Brother
Ever play around with Hawaiian baby woodrose seeds and petroleum ether?
Sent from my iPhone using Tapatalk
Funny you say that. I wear a gown, head cover, mask, and gloves that I tape to the sleeves of the gown. I do all this after taking a shower, then scrubbing my hands and forearms with a surgical scrub. Once my Son goes to school, I'll put on some music, and get down to business.
I prefer tidy whities and a button down, just like WW. lol
I do the pajama route with surgical mask, gloves and hair cap.
krazieone56
New Member
I usually brew naked lol.
KRAZIEONE
KRAZIEONE
bobsyouruncle
Buff Brother
krazieone56
New Member
Lol.
KRAZIEONE
KRAZIEONE
My gigantic cock would just keep getting in the way.
krazieone56
New Member
Oh boy. Now the conversation just went south literally.
Confidently, I don't use a stirrer while brewing. I use my cock. Gives it a nice nutty flavor post injection
KRAZIEONE
Confidently, I don't use a stirrer while brewing. I use my cock. Gives it a nice nutty flavor post injection
KRAZIEONE
dinkleberg
New member
IM drugs, not IV
I tried morning glory, several different times..i got the right seeds and all..just made me puke..ugh
bobsyouruncle
Buff Brother
IM drugs, not IV
You need to smash the husks and only take the inside the hairy outside is what makes you sick I used to get that off then throw a ton if them into a blender then I put the powder into pantyhose and soaked it in petroleum ether I don't remember what else I had to do but the finished product was a suspension in 190 proof and it made you trip balls for a short while
Sent from my iPhone using Tapatalk
Peyote grows in the wild here and is easy to find. Im not big on doing psychadelics, but we throw some in pure alcohol and use it as a rubdown for tired and sore muscles.
If you ever come visit me in Mexico Bob we can try some peyote tea together, they say it kicks pretty nice!
GringoLoco
New member
I found some of that shit while I was backpacking close to the boarder when I was 16, nothing like trippin in the desert Beavis and Butthead style hahaha
bobsyouruncle
Buff Brother
Damn that's the one I haven't tried yet when I got married I told my wife I wouldn't use any harsh drugs anymore (coke) but that if I ever came across peyote that I had to try it psychedelics were my go to I was into natural ones mushrooms and mescaline mostly I used acid and a couple synthetics but they had a harsh "push" to them and felt amphetamine like and dirty I haven't touched any in about a year and last time was because a buddy wanted to try mushrooms and I decided to help him out but you just gave me some serious incentive to take a vacation
Sent from my iPhone using Tapatalk
Well if you and your wife ever decide to come to the Guadalajara area, you never have to worry about a place to stay. Or if you ever get to Puerto Vallarta its a 4 and a half hour drive.
There are some VERY fun things available to play with and if we stay in my town, there is literally nothing we could get in trouble for.
bobsyouruncle
Buff Brother
And so are you! I answered your email.
Whoa just checked back in on the thread and yall have been all over. Bob I always wanted to try those Hawaiian seeds but I heard the puke factor was pretty high. I had been reading about research chems like 2CI and 2cb being legal to buy over in the UK. I've just been focusing on getting cut and built up, haven't really done any recreationals in a long - long while. I always preferred psychedelics over any others really.
bobsyouruncle
Buff Brother
Yeah I don't want to talk about it too much seeing as this is a steroid forum not erowid but like I said if prepared properly you shouldent feel very sick the first time I did the extraction I was squeezing the seeds in some pantyhose and I had bare hands I absorbed the liquid through my hands FAST I was tripping instantly it was Christmas time I made my way to my living room and sat in my recliner and just checked out the Christmas tree lights for about a half hour they have to be good seeds true Hawaiians I've tried others with shitty results but the Hawaiians will have you twisted if you do the extraction correctly
Sent from my iPhone using Tapatalk
Thanks for the tip, maybe I will try someday - gonna have to be when everyone is gone from my house though. So back to brewing... I remember back when I was in chemistry we had to have very good aseptic techniques. When going for a batch do you guys spray everything down, sterilize instruments, garb up, put on gloves? Are you approaching the brew methods as you would in a chem lab or do some of you just go for a more clandestine approach?
bobsyouruncle
Buff Brother
I've done both when I started I wiped everything down sterilized beakers etc. and brewed in shorts or sweats and a beater the gear was fine but now I take every precaution I can and I try to leave bb as low as possible
Sent from my iPhone using Tapatalk
dinkleberg
New member
I removed the husks from them, i used the lime/lemon juice method. They were legit, i probably just screwed up or had a bad reaction to them. I tried it at a time when the real deal was pretty abundant for me so LSA wasn't high on my list, just something I wanted to try.
I've done a wad of RC's as well...yes, back to homebrewing!
I've done a wad of RC's as well...yes, back to homebrewing!
devildog
Evolutionary Retired
I look and feel like Walter White when compounding.
I always channel my inner WW. im just missing a Jessie....
- Status
Similar threads
