Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply US-PHARMACIES
UGL OZ UGFREAK OxygenPharm
napsgeargenezapharmateuticals domestic-supplyUS-PHARMACIESUGL OZUGFREAKOxygenPharm

Does the cold destroy test?

Kosta Jeezy

Kosta Jeezy

Buff Brother
Registered
I had a package of test delivered today at 2:30pm sat outside for 2 hours in 10*F temps. Is it junk now?


---I've done my turn of killing. Time to start living---
 
No is not junk if in any case got some cristal inside just warm the bottle for a few seconds in hot water
 
Great thanks guys. So even if test is frozen just thaw, reheat and inject?


---I've done my turn of killing. Time to start living---
 
Inject it all until I see nothing inside!! Sounds good to me!!!!!
ydanemyp.jpg



---I've done my turn of killing. Time to start living---
 
Never had "crashed" gear before. So
I wouldnt know.... ?! I had my girly get it for me and take it home and open it up AND inspect it... She said that a vial of 200mg/ml 10ml Cyp had what looked like one "crystal" in it. I will have to look for myself when I get home tonight. Maybe the post office will have to but me some test!


---I've done my turn of killing. Time to start living---
 
Kosta Jeezy said:
Never had "crashed" gear before. So
I wouldnt know.... ?! I had my girly get it for me and take it home and open it up AND inspect it... She said that a vial of 200mg/ml 10ml Cyp had what looked like one "crystal" in it. I will have to look for myself when I get home tonight. Maybe the post office will have to but me some test!


---I've done my turn of killing. Time to start living---
Click to expand...

If it crashed it will most likely continue to form more crystals, sometimes even longer glass looking shards. If it was just the cold from outside it should be stable back inside your house.

Either way the gear would be fine, I have used crashed gear from homebrew when I was playing with different concentrations and low BB. Resuspend the hormone, draw while it is suspended, and pin.
 
You have crystals and swirls? I am not sure of the brand, but if they stand behind their product I would have it replaced. It looks like it crashed and needs to be refiltered. No big problem either way but since you are buying a finished product. it needs a little more work.

Its the fault of whoever brewed that batch. Cyp is a little more difficult than Test E to work with. Test E at 300mg/ml will hold easily with zero BB, Cyp is more troublesome. For almost the same half life I prefer E, but people I think are used to seeing Cyp in TRT.

Thanks for the pics.
 
mh48500 said:
You have crystals and swirls? I am not sure of the brand, but if they stand behind their product I would have it replaced. It looks like it crashed and needs to be refiltered. No big problem either way but since you are buying a finished product. it needs a little more work.

Its the fault of whoever brewed that batch. Cyp is a little more difficult than Test E to work with. Test E at 300mg/ml will hold easily with zero BB, Cyp is more troublesome. For almost the same half life I prefer E, but people I think are used to seeing Cyp in TRT.

Thanks for the pics.
Click to expand...

The rest of the Cyp I got is good. No swirls just a bad pic.

If I cook it down, and filter, should be g2g?


---I've done my turn of killing. Time to start living---
 
mh48500 said:
You have crystals and swirls? I am not sure of the brand, but if they stand behind their product I would have it replaced. It looks like it crashed and needs to be refiltered. No big problem either way but since you are buying a finished product. it needs a little more work.

Its the fault of whoever brewed that batch. Cyp is a little more difficult than Test E to work with. Test E at 300mg/ml will hold easily with zero BB, Cyp is more troublesome. For almost the same half life I prefer E, but people I think are used to seeing Cyp in TRT.

Thanks for the pics.
Click to expand...

4.5 day half-life vs. 8 day half-life...ehhh...not really almost the same. If I were using one for TRT and only injecting once a week I would stick with cyp. If it were on cycle, I'd inject either one twice a week and it wouldn't matter to me which I used.

At a TRT dose of 200mg, with Test E at 7 days (day of next injection) my blood levels will already be almost 1/3 of what they would be with the same 200mg dose of Test C.

200mg Test E - 4 days post injection = 970ng/dL
200mg Test E - 7 days post injection = 362ng/dL

200mg Test C - 7 days post injection = 922ng/dL
 
ceo said:
4.5 day half-life vs. 8 day half-life...ehhh...not really almost the same. If I were using one for TRT and only injecting once a week I would stick with cyp. If it were on cycle, I'd inject either one twice a week and it wouldn't matter to me which I used.

At a TRT dose of 200mg, with Test E at 7 days (day of next injection) my blood levels will already be almost 1/3 of what they would be with the same 200mg dose of Test C.



200mg Test E - 4 days post injection = 970ng/dL
200mg Test E - 7 days post injection = 362ng/dL

200mg Test C - 7 days post injection = 922ng/dL
Click to expand...

Ok so I was off on the "close" comment, lol. But he is not on TRT, and from a brewing standpoint Cyp is a bitch compared to E.

Thanks for always laying down the "correct" knowledge! I need to brush up on half lives, hahhaa.
 
Kosta Jeezy said:
The rest of the Cyp I got is good. No swirls just a bad pic.

If I cook it down, and filter, should be g2g?


---I've done my turn of killing. Time to start living---
Click to expand...

Wow from the pics I really thought there were swirls! If there are no swirls, there really is no point in refiltering. The crystals will have to have be addressed though. You will want to heat before each injection to resuspend them, draw and pin. You could try and add some BB while heating and resuspending, and filter if you want.

Your only issue are the crystals.
 
Brothers one of my sources send me a few bottles like that a few years ago was a good and excellent blend was test with winstral together, and use to crystallize all the time so my solution was I warm the bottle every time I wanted to used and every time I warm the oil and shake the cristal go away
 
paja said:
Brothers one of my sources send me a few bottles like that a few years ago was a good and excellent blend was test with winstral together, and use to crystallize all the time so my solution was I warm the bottle every time I wanted to used and every time I warm the oil and shake the cristal go away
Click to expand...

Absolutely, sometimes if I overdose my Test brew the same happens. Its no problem at all,you just want to get them back in the mix before drawing. At least he knows that there is Test in there, lol.
 
mh48500 said:
Absolutely, sometimes if I overdose my Test brew the same happens. Its no problem at all,you just want to get them back in the mix before drawing. At least he knows that there is Test in there, lol.
Click to expand...

Lol or magic power crystals! 🙌

Can you show me a pic of "crashed " gear (from a home brew if u have one)?


---I've done my turn of killing. Time to start living---
 
The only thing I have right now are some 10ml amber vials of prop that have some slight crystallization, hopefully it shows in a photo. I will try to find my old pics of Test Prop 150mg/ml and 200mg/ml....talk about magic crystals!
 
mh48500 said:
The only thing I have right now are some 10ml amber vials of prop that have some slight crystallization, hopefully it shows in a photo. I will try to find my old pics of Test Prop 150mg/ml and 200mg/ml....talk about magic crystals!
Click to expand...

Great thanks!!! Appreciate it brother


---I've done my turn of killing. Time to start living---
 
I just looked at a vial of cyp I have and it was crystallized , but the others were not , and it ain't even that cold , is that a sign that it's real ?


All starting to make sense !
 
Look, just take it, twist a pin off one of your 22-25g syringes . Run some hot water in your sink, so it's about half way up the vial , let the "hot" water run (halfway) take your twisted off needle, poke it in the "rubber "stopper' and put it in the hot water ,It will de-crystallize and not break...it's really not rocket science, and folks, it's winter, I see these same posts every winter, but not as bad, this is a bad ass winter......AnalogMan
 
Last edited:
AnalogMan said:
Look, just take it, twist a pin off one of your 22-25g syringes . Run some hot water in your sink, so it's about half way up the vial , let the "hot" water run (halfway) take your twisted off needle, poke it in the "rubber "stopper' and put it in the hot water ,It will de-crystallize and not break...it's really not rocket science, and folks, it's winter, I see these same posts every winter, but not as bad, this is a bad ass winter......AnalogMan
Click to expand...

I think I get what u mean. Thanks


---I've done my turn of killing. Time to start living---
 
You must log in or register to reply here.

Similar threads

Miketraining56
Approved Log First TRT Log
Replies
8
Views
126
LevButlerov
LevButlerov
GamerGainz
Approved Log Re-comp Cycle Log Team AuStarLabs NZ
Replies
27
Views
226
LevButlerov
LevButlerov
C
Help with what to run, HGH or Test
Replies
23
Views
301
ceo
ceo
Nick9797
Approved Log Melanotan 2 Training Log
Replies
51
Views
534
LevButlerov
LevButlerov
Le4ned
Approved Log First Growth Log - Testosterone Equipoise Retatrutide Cycle
Replies
31
Views
296
Le4ned
Le4ned
Back
Top Bottom