Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply US-PHARMACIES
UGL OZ UGFREAK OxygenPharm
napsgeargenezapharmateuticals domestic-supplyUS-PHARMACIESUGL OZUGFREAKOxygenPharm

Homebrewers lounge

Status
Not open for further replies.
I was watching that threadnaught go down live on reddit..so many people are pissed, the scary thing is they don't know what the fillers are...
 
Yeah I just read through it. Guy is trying to save face. Sad thing is that all he has to do is remake a new email and come up with a new name and he's back in the game.
 
65f8bed7b3018416c41e04987e21c718.jpg


Good weekend!
 
nsnmatty said:
Thanks bro. Felt stupid not having labels. Not up to your standard, Photoshop confuses me hahaha. I can't wait to pin it today.
Click to expand...

It's not about labels bro it's about the gear inside
Plus I'm going to have to start making them Blackwidow labels again them damn boxes are beginning to be a pain in my ass


Sent from BLACK WIDOW HEADQUARTERS
 
Z28blak said:
It's not about labels bro it's about the gear inside
Plus I'm going to have to start making them Blackwidow labels again them damn boxes are beginning to be a pain in my ass


Sent from BLACK WIDOW HEADQUARTERS
Click to expand...
I can put that new logo on clear labels for u bro. NP.

KRAZIEONE
 
krazieone56 said:
I can put that new logo on clear labels for u bro. NP.

KRAZIEONE
Click to expand...

Yea it's not to bad on the labels for me it's getting the damn place to make the boxes but leave them intack so I can print on them


Sent from BLACK WIDOW HEADQUARTERS
 
Lol that shit is two thick bro... Lol I'm talking like hgh style boxes


Sent from BLACK WIDOW HEADQUARTERS
 
krazieone56 said:
They got those too. Just go to that site. And search for gift boxes. They r thin

KRAZIEONE
Click to expand...

Okay but that takes me to the same dilemma as there already cut much harder to print on were if I get them still attached but with the line breaks much easier to print on


Sent from BLACK WIDOW HEADQUARTERS
 
nsnmatty said:
65f8bed7b3018416c41e04987e21c718.jpg


Good weekend!
Click to expand...

Man oh MAN! Gets my dick hard seeing all THAT! I cannot wait to get into homebrewing ... but I want to brew specifically for my own use, not even thinking about distributing at the moment (see what I did there? ... at the moment ...) :p
 
Nice brewing folks 😛
Have yet to do my next try. Work is heavy and time is my problem. But next week I hope to show a new try from me :)
 
Just read on this thread for atleast 2 hours straight, there is too much knowledge on here to be obtained. Just from the knowledge of everyone here I feel like homebrewing would be a breeze other than minor mishaps here and there.
 
TDubs13 said:
Just read on this thread for atleast 2 hours straight, there is too much knowledge on here to be obtained. Just from the knowledge of everyone here I feel like homebrewing would be a breeze other than minor mishaps here and there.
Click to expand...

My only Problem when I gave it a try, is the Second Time, I had a "Brain Fart", and my Math was off, but I Corrected it............... JP
P.S.
Over on Meso, in their Home Brew Section, there's a Very Long List of Recipes for Oils and Orals, it's a Good Starting Point.
 
If you're just starting out, I'd just stick with the proven recipes. Once you get the system down, custom blends & concentrations are fun. I think my worst boo boo, the one I kicked myself in the balls over was not filtering with the BT filter/Media bottle in a pot... The filter busted and about 200ml of gear when everywhere.... If I had put it in a pot could have refiltered it all.... It was Test E so it wasn't that costly but say it had been Tren....OMG! LoL
 
melochai said:
If you're just starting out, I'd just stick with the proven recipes. Once you get the system down, custom blends & concentrations are fun. I think my worst boo boo, the one I kicked myself in the balls over was not filtering with the BT filter/Media bottle in a pot... The filter busted and about 200ml of gear when everywhere.... If I had put it in a pot could have refiltered it all.... It was Test E so it wasn't that costly but say it had been Tren....OMG! LoL
Click to expand...
This is a great idea!

Ps I'm clearing my inbox
 
Testosterone Enanthate powder 62.5g 250ml @ 250mg/ml
Benzyl Alcohol 5ml (2%)
Benzyl Benzoate 45ml (18%)
Grapeseed Oil 153.13ml

Probably the easiest/best starter brew next to orals dissolved in everclear


Sent from my iPhone using Tapatalk
 
kfriesen said:
I don't think he will ever live that one down. Not because other people haven't done it, but because he was so pissed lol
Click to expand...
That's just the start of it. Same recipe I've used before, slightly higher concentration but this fickle bitch keeps crashing....it ends today this shit is going to hold once and for all lolol
 
bobsyouruncle said:
Testosterone Enanthate powder 62.5g 250ml @ 250mg/ml
Benzyl Alcohol 5ml (2%)
Benzyl Benzoate 45ml (18%)
Grapeseed Oil 153.13ml

Probably the easiest/best starter brew next to orals dissolved in everclear


Sent from my iPhone using Tapatalk
Click to expand...


Why do you add the BB for TE?
 
melochai said:
If you're just starting out, I'd just stick with the proven recipes. Once you get the system down, custom blends & concentrations are fun. I think my worst boo boo, the one I kicked myself in the balls over was not filtering with the BT filter/Media bottle in a pot... The filter busted and about 200ml of gear when everywhere.... If I had put it in a pot could have refiltered it all.... It was Test E so it wasn't that costly but say it had been Tren....OMG! LoL
Click to expand...

I have yet to bust one but I always have a catch pan for those rainy days.
I think I busted a filter once. Was going hella slow then it picked up speed. Not sure refilted anyway.
 
bobsyouruncle said:
You are right it's not needed but it does help to hold it the reason I add it is to thin out the solution (some of you may cringe but it works well and it allows me to use thinner pins)


Sent from my iPhone using Tapatalk
Click to expand...

Slow but painless.

How high have y'all gotten E before pip starts?



Sent from my iPhone using Tapatalk
 
bobsyouruncle said:
You are right it's not needed but it does help to hold it the reason I add it is to thin out the solution (some of you may cringe but it works well and it allows me to use thinner pins)


Sent from my iPhone using Tapatalk
Click to expand...

who doesnt add BB? Not using it makes the oil so damn thick you can barely pin it. Not like it adds PIP or anything
 
shred26 said:
who doesnt add BB? Not using it makes the oil so damn thick you can barely pin it. Not like it adds PIP or anything
Click to expand...
Bb is a co solvent. Its not for thinning its for keeping suspended. U want it thinner then change your carrier oil or cut with eo

KRAZIEONE
 
krazieone56 said:
Bb is a co solvent. Its not for thinning its for keeping suspended. U want it thinner then change your carrier oil or cut with eo

KRAZIEONE
Click to expand...

I know you are a fan of eo but it seems like most guys are dead set against it I use gso and if anyone knows of a thinner oil I'm all ears the bottom line is the bb will not increase pip in fact it will most likely lessen it due to lower viscosity this practice can be looked down on by some but it is simply thinking outside the box to accomplish a goal and it does that effectively without using eo I have ran this side by side with other ugl's test e and I can tell you that this recipe worked through smaller pins and gave less pip if any the finished gear is by far my favorite long ester test out of any I have tried


Sent from my iPhone using Tapatalk
 
Okay, sorry KZ but I'm bringing this up to the forum cause I'm still fucking puzzled hahahah.

Made test C last week, Saturday night to be exact 220 ML at 225mgs, 50 grams total.

It was fine for three days, on the fourth day I went to pin it was fucking solid as sin, all 20 vials.

Reheated the entire solution WITHOUT VENTING, after 20 hours it didn't crash so me and KZ thoughts LETS CRASH THIS BITCH ON PURPOSE.

3 in the freezer

2 in the fridge

15 minutes no crash, 30 minutes no crash, 1 hour no crash.


It's been 2 hours since I removed from fridge, all is fine.

WHAT THE FUCK IS GOING ON. If it didn't crash in the freezer and my reheat was just until it was all melted, very low temp.....is this bitch good to go?

2% BA 10% BB, I use this for 200mgs a ml so I didn't see 225 being an issue.

Bloods came back on this powder they were amazing so I don't doubt the purity for a second. I'm just worried about this falling out of depot and causing PIP or am I in the clear now?
 
bobsyouruncle said:
I know you are a fan of eo but it seems like most guys are dead set against it I use gso and if anyone knows of a thinner oil I'm all ears the bottom line is the bb will not increase pip in fact it will most likely lessen it due to lower viscosity this practice can be looked down on by some but it is simply thinking outside the box to accomplish a goal and it does that effectively without using eo I have ran this side by side with other ugl's test e and I can tell you that this recipe worked through smaller pins and gave less pip if any the finished gear is by far my favorite long ester test out of any I have tried


Sent from my iPhone using Tapatalk
Click to expand...
Mixing in eo. But as of late I have used other oils. There are thinner oils. Like cottonseed. Coconut oil etc. Just have to try them oil. People need to stop being so narrowed minded gso isn't the only oil out there. Lol.

KRAZIEONE
 
No more debate on EO WHAT THE FUCK IS UP WITH THIS TEST lolololol. I'm being stumped by the stupidest easiest most fickle bitch of a brew ever. Bob please weigh in
 
nsnmatty said:
Okay, sorry KZ but I'm bringing this up to the forum cause I'm still fucking puzzled hahahah.

Made test C last week, Saturday night to be exact 220 ML at 225mgs, 50 grams total.

It was fine for three days, on the fourth day I went to pin it was fucking solid as sin, all 20 vials.

Reheated the entire solution WITHOUT VENTING, after 20 hours it didn't crash so me and KZ thoughts LETS CRASH THIS BITCH ON PURPOSE.

3 in the freezer

2 in the fridge

15 minutes no crash, 30 minutes no crash, 1 hour no crash.


It's been 2 hours since I removed from fridge, all is fine.

WHAT THE FUCK IS GOING ON. If it didn't crash in the freezer and my reheat was just until it was all melted, very low temp.....is this bitch good to go?

2% BA 10% BB, I use this for 200mgs a ml so I didn't see 225 being an issue.

Bloods came back on this powder they were amazing so I don't doubt the purity for a second. I'm just worried about this falling out of depot and causing PIP or am I in the clear now?
Click to expand...
Pin some. Lol then u will know.

KRAZIEONE
 
nsnmatty said:
No more debate on EO WHAT THE FUCK IS UP WITH THIS TEST lolololol. I'm being stumped by the stupidest easiest most fickle bitch of a brew ever. Bob please weigh in
Click to expand...
You shouldn't even be brewing coffee! Lol jk.


I think maybe it just needed another kick in the pants.

KRAZIEONE
 
nsnmatty said:
Okay, sorry KZ but I'm bringing this up to the forum cause I'm still fucking puzzled hahahah.

Made test C last week, Saturday night to be exact 220 ML at 225mgs, 50 grams total.

It was fine for three days, on the fourth day I went to pin it was fucking solid as sin, all 20 vials.

Reheated the entire solution WITHOUT VENTING, after 20 hours it didn't crash so me and KZ thoughts LETS CRASH THIS BITCH ON PURPOSE.

3 in the freezer

2 in the fridge

15 minutes no crash, 30 minutes no crash, 1 hour no crash.


It's been 2 hours since I removed from fridge, all is fine.

WHAT THE FUCK IS GOING ON. If it didn't crash in the freezer and my reheat was just until it was all melted, very low temp.....is this bitch good to go?

2% BA 10% BB, I use this for 200mgs a ml so I didn't see 225 being an issue.

Bloods came back on this powder they were amazing so I don't doubt the purity for a second. I'm just worried about this falling out of depot and causing PIP or am I in the clear now?
Click to expand...

What carrier?


Sent from my iPhone using Tapatalk
 
krazieone56 said:
Mixing in eo. But as of late I have used other oils. There are thinner oils. Like cottonseed. Coconut oil etc. Just have to try them oil. People need to stop being so narrowed minded gso isn't the only oil out there. Lol.

KRAZIEONE
Click to expand...

I have safflower oil,sesame oil, and grapeseed oil out of what I have gso is the thinnest I haven't tried cottonseed so I'm not sure of the viscosity I also have mct oil which is very thin but I have taken it as a supp and haven't given much thought to using it for gear so out of what I have that if use for gear gso is the thinnest I will have to try the mct oil out in a small batch maybe someone should start a thread about carrier oils the differences and pros and cons


Sent from my iPhone using Tapatalk
 
bobsyouruncle said:
I have safflower oil,sesame oil, and grapeseed oil out of what I have gso is the thinnest I haven't tried cottonseed so I'm not sure of the viscosity I also have mct oil which is very thin but I have taken it as a supp and haven't given much thought to using it for gear so out of what I have that if use for gear gso is the thinnest I will have to try the mct oil out in a small batch maybe someone should start a thread about carrier oils the differences and pros and cons


Sent from my iPhone using Tapatalk
Click to expand...
I tried, it didn't take off as planned. The lounge died down after mh left
 
Yes it did as far as your brew that is a bit puzzling most recipies call for 5% ba and no bb but if you can get it to hold with less more power to you if it were me I would wait the same amount of time that it took for it to crash originally and I'm guessing it will crash again at that point I would add 1% bb until it remains stable for at least a week I have had the same issue in the past with gear crashing from extended time but not short periods of cold and I crept the solvent up slowly until I found out how much was needed for it to hold the only real downside here is your final product will not be quite as potent as you are going for


Sent from my iPhone using Tapatalk
 
bobsyouruncle said:
Yes it did as far as your brew that is a bit puzzling most recipies call for 5% ba and no bb but if you can get it to hold with less more power to you if it were me I would wait the same amount of time that it took for it to crash originally and I'm guessing it will crash again at that point I would add 1% bb until it remains stable for at least a week I have had the same issue in the past with gear crashing from extended time but not short periods of cold and I crept the solvent up slowly until I found out how much was needed for it to hold the only real downside here is your final product will not be quite as potent as you are going for


Sent from my iPhone using Tapatalk
Click to expand...
Only problem is it needs to be delivered tomorrow. That's why his urgency.

KRAZIEONE
 
bobsyouruncle said:
Yes it did as far as your brew that is a bit puzzling most recipies call for 5% ba and no bb but if you can get it to hold with less more power to you if it were me I would wait the same amount of time that it took for it to crash originally and I'm guessing it will crash again at that point I would add 1% bb until it remains stable for at least a week I have had the same issue in the past with gear crashing from extended time but not short periods of cold and I crept the solvent up slowly until I found out how much was needed for it to hold the only real downside here is your final product will not be quite as potent as you are going for


Sent from my iPhone using Tapatalk
Click to expand...
Most cyp recipes I saw called for cyp. The puzzling part to me is if it was going to crash why didn't it crash in the freezer.

BA will keep it suspended in the vital but once it dissipates it could crash in depot which is my concern.
 
krazieone56 said:
Only problem is it needs to be delivered tomorrow. That's why his urgency.

KRAZIEONE
Click to expand...

Nah not risking it. I just next day aired a few things I planned on ordering and more BB. I was going to order it at 4am this morning and I would've had it tomorrrow but oh well I should have it by Friday, it is what it is. I'm upping it to 20% BB and bringing the concentration down 200 mgs.
 
nsnmatty said:
Nah not risking it. I just next day aired a few things I planned on ordering and more BB. I was going to order it at 4am this morning and I would've had it tomorrrow but oh well I should have it by Friday, it is what it is. I'm upping it to 20% BB and bringing the concentration down 200 mgs.
Click to expand...
Well alroghty then.

KRAZIEONE
 
krazieone56 said:
a2ady8yv.jpg


Supplies arrived. Now if the raws would just show up!

KRAZIEONE
Click to expand...

This is like seeing that HOT_ASSED girl in her bikini. When the RAWS arrive and you post a pic of those, it would be like her removing the top. When they have all been reconstituted and bottled and you pose a pic of those, well, SHE WOULD BE NAKEEEEEEEED!
 
Status
Not open for further replies.

Similar threads

WillyC
Is there a page on here dedicated to lab test results from different suppliers?
Replies
12
Views
88
ballin2504
ballin2504
W
xroids.to scammed for everything :(
Replies
10
Views
168
2Thick
2Thick
Pinch73
Best place to get peds
Replies
30
Views
240
LevButlerov
LevButlerov
milbous1
Merry Christmas Evo Family
Replies
13
Views
193
HarleyGuy
HarleyGuy
J
Chinese market?
Replies
16
Views
468
RoySimpson
RoySimpson
Back
Top Bottom