Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply US-PHARMACIES
UGL OZ UGFREAK OxygenPharm
napsgeargenezapharmateuticals domestic-supplyUS-PHARMACIESUGL OZUGFREAKOxygenPharm

More mixing going on

AnalogMan

Banned
DSC06815.webpDSC06814.webp Nice Blend...AnalogMan
 
half life is the time when half of the substance remains. For example if you take 100mg of enan and the half life is 4,5 days, then at 4.5 days you will have 50mg left.
 
The blends work by putting different esters attached to testosterone into one 'blend'. The advantage is you will have the short esters (those that your body will absorb quickly) and the longer esters (for a delayed absorption).
 
I would do every other day to fully utilize the short ester, however twice a week would be fine. It also depends on how much you are willing to take, and how many times you are willing to pin. 600mg a week you could do 300mg twice or 200mg three times a week. My preference is more frequent pinning, however there really is no right or wrong way. \

If it was just enan then yes I would pin every 3 or 4 days.
 
So that what I don't get about the blends , why not just use prop ? Or am I not taking into consideration the mg of the different compounds ?


All starting to make sense !
 
So that what I don't get about the blends , why not just use prop ? Or am I not taking into consideration the mg of the different compounds ?


All starting to make sense !

could be a few reasons. Might want to get the faster releasing/clearing esters, but not want to inject ED or EOD. Prop is nice because it acts fast, but it hurts like hell (PIP). Blending it with cyp and enanth cuts that pain down. High mg/ml with prop is an issue because typically about 100mg/ml is the ceiling with it. Plus, it already hurts...if you can get it stable at over 100mg/ml, it hurts even more. Shit is crippling. Lighter esters also give you more mg of actual test due to less ester.
 
What are the test compounds in t400 and t300? Just e and c?


---I've done my turn of killing. Time to start living---
 
I think my brother "CEO" explained it pretty well . If you sit and think about it, it will come to you..........

T300= / 100mg Test Prop /100mg Test E / 100mg Test C.
T400= / 50mg Test Prop / 175mg Test E / 175mg Test C

I'll go thru the "ester " family later today, so you guys well have a "reference" to look at on your cycle prep.......AnalogMan
 
Last edited:
I think my brother "CEO" explained it pretty well . If you sit and think about it, it will come to you..........

T300= / 100mg Test Prop /100mg Test E / 100mg Test C.
T400= / 50mg Test Prop / 175mg Test E / 175mg Test C

I'll go thru the "ester " family later today, so you guys well have a "reference" to look at on your cycle prep.......AnalogMan

I dunno why i missed that.... I think I was just more interested in the mg amounts and not thinking. Even worse I should of looked at the pics better. Lol


And a ester chart with half life's would be a good thing to have around the board. Also average time it takes for compounds to take effect in the blood.

---I've done my turn of killing. Time to start living---
 
Last edited:
I would do every other day to fully utilize the short ester, however twice a week would be fine. It also depends on how much you are willing to take, and how many times you are willing to pin. 600mg a week you could do 300mg twice or 200mg three times a week. My preference is more frequent pinning, however there really is no right or wrong way. \

If it was just enan then yes I would pin every 3 or 4 days.

Good explanation my bro
 
I dunno why i missed that.... I think I was just more interested in the mg amounts and not thinking. Even worse I should of looked at the pics better. Lol


And a ester chart with half life's would be a good thing to have around the board. Also average time it takes for compounds to take effect in the blood.

---I've done my turn of killing. Time to start living---

Most of the ester charts with "half-lives" posted on BBing boards are inaccurate to some degree.

This is why so many people think the half-life of test cyp is something like 16 days. That would be the active life. The half-life is half of that, or 8 days.

Most also usually think test E half-life is up to 12-16 days as well, but the half-life is actually 4.5 days.
 
Most of the ester charts with "half-lives" posted on BBing boards are inaccurate to some degree.

This is why so many people think the half-life of test cyp is something like 16 days. That would be the active life. The half-life is half of that, or 8 days.

Most also usually think test E half-life is up to 12-16 days as well, but the half-life is actually 4.5 days.

Hence why I said the Jedi Masters should post it all up .


---I've done my turn of killing. Time to start living---
 
Be not afraid to ask Young Padawan! Fuck it I will !



All starting to make sense !

I research first then ask, then ask some more. Not afraid to say I'm pretty new to this part of the game. Only on my 4th cycle. Still years worth to learn of the force. Good mentions, is a blessing.


---I've done my turn of killing. Time to start living---
 
Thx again Guys , I remember many years ago it was about geting enough test for 10 week , if your nipples got sore get some Nolva , and at the end of the cycle some HCG if you felt like shit , damn we were wrong , now I understand how important it is to get bloods , AI , and pct , without that you put you body in irreplaceable damage !..,,.But it was so much Cheeper the other way....💪


All starting to make sense !
 
I think my brother "CEO" explained it pretty well . If you sit and think about it, it will come to you..........

T300= / 100mg Test Prop /100mg Test E / 100mg Test C.
T400= / 50mg Test Prop / 175mg Test E / 175mg Test C

I'll go thru the "ester " family later today, so you guys well have a "reference" to look at on your cycle prep.......AnalogMan
Hey Guys, remember, the only stupid question, is the one you didn't ask.........................................................JP
 
could be a few reasons. Might want to get the faster releasing/clearing esters, but not want to inject ED or EOD. Prop is nice because it acts fast, but it hurts like hell (PIP). Blending it with cyp and enanth cuts that pain down. High mg/ml with prop is an issue because typically about 100mg/ml is the ceiling with it. Plus, it already hurts...if you can get it stable at over 100mg/ml, it hurts even more. Shit is crippling. Lighter esters also give you more mg of actual test due to less ester.

Nice explanation!

I actually used to mix Prop and E in the same syringe when the light bulb turned...
 
Can you bump start a test c cycle with prop ?


All starting to make sense !

I am from the school of belief that you can do anything you want to, see if it works for you, especially since you will be able to comment on experience not theory...I personally like the kick that Prop gives with each injection. For a long time I had so much Prop powder that I cycled with it exclusively. Since I switched to E for less pinning, I will pop a ml into an E injection sometimes during the week for an extra kick.
 
Back
Top Bottom