Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply US-PHARMACIES
UGL OZ UGFREAK OxygenPharm
napsgeargenezapharmateuticals domestic-supplyUS-PHARMACIESUGL OZUGFREAKOxygenPharm

Homebrewers lounge

Status
Not open for further replies.
Nsn, there are nice stands with filter clamps, base is a couple of lb.s, swivel and safety release fittings are all ways a great thing to have. J
 
Biotoxic said:
Nsn, there are nice stands with filter clamps, base is a couple of lb.s, swivel and safety release fittings are all ways a great thing to have. J
Click to expand...

yeah, unfortunately I think I was lost in my head about the shitty situation I'm in and wasn't as observant as I should have been. After that mistake I watched the EQ600 like a fucking hawk hahahah. I may invest in one of the stands soon. Got about 200 something grams coming in later this week and then probably 300 more in 2 weeks. Ah, feels great to be brewing again.
 
nsnmatty said:
yeah, unfortunately I think I was lost in my head about the shitty situation I'm in and wasn't as observant as I should have been. After that mistake I watched the EQ600 like a fucking hawk hahahah. I may invest in one of the stands soon. Got about 200 something grams coming in later this week and then probably 300 more in 2 weeks. Ah, feels great to be brewing again.
Click to expand...
Matty, I'm looking forward to your reviews of these suppliers.
 
kfriesen said:
Matty, I'm looking forward to your reviews of these suppliers.
Click to expand...

Awaiting shipment on the second source. So far communication from both has been excellent. One went above and beyond to make sure we were able to communicate at any time, they just let me down with shipping but it did go through customs in a matter of hours. Unfortunately, after a shitty day I was not myself and got sloppy and spilled 100ml of test from them which was the entire sample. Luckily I did brew up the EQ from them but I feel this will impact my ability to give a quality review. If it means anything it appeared to be of high purity, texture and smell were spot on for test C. Company is very discreet about what they produce, which is nice. 10g minimum. Also carries peptides.

Second company is not discreet about what they do but they are extremely quick to respond and ship. Have had great success on shipping to other members on another forum I'm on and bloods from his raws came back at the 3500 range for 500mgs of test c a week which is excellent. I'll speak of shipping and quality when it arrives later this week. 1g minimum per compound....yes that is correct, one gram minimum but you pay a premium price. Also carries finished products, peptides, hgh.

After its all said and done with I will give me reviews, unfortunately the area I live in will not allow me to get bloodwork done at will so I'll bring the sources to the thread, and you guys can make a decision based on the feedback. I have a very good rapport forming with one of the sources so I may try to see if I can get an EVO introduction discount of some kind for anyone placing orders.
 
nsnmatty said:
Awaiting shipment on the second source. So far communication from both has been excellent. One went above and beyond to make sure we were able to communicate at any time, they just let me down with shipping but it did go through customs in a matter of hours. Unfortunately, after a shitty day I was not myself and got sloppy and spilled 100ml of test from them which was the entire sample. Luckily I did brew up the EQ from them but I feel this will impact my ability to give a quality review. If it means anything it appeared to be of high purity, texture and smell were spot on for test C. Company is very discreet about what they produce, which is nice. 10g minimum. Also carries peptides.

Second company is not discreet about what they do but they are extremely quick to respond and ship. Have had great success on shipping to other members on another forum I'm on and bloods from his raws came back at the 3500 range for 500mgs of test c a week which is excellent. I'll speak of shipping and quality when it arrives later this week. 1g minimum per compound....yes that is correct, one gram minimum but you pay a premium price. Also carries finished products, peptides, hgh.

After its all said and done with I will give me reviews, unfortunately the area I live in will not allow me to get bloodwork done at will so I'll bring the sources to the thread, and you guys can make a decision based on the feedback. I have a very good rapport forming with one of the sources so I may try to see if I can get an EVO introduction discount of some kind for anyone placing orders.
Click to expand...
I think I may have been in contact with your second guy.. i didn't want to play the international game, but I have a feeling it's just the only way.
 
Needing a good source for raw powders, trying to do a little homebrewing of my own. Any legit source is greatly appreciated.
 
Ok, I've decided to take th plunge. Brewing seems to be the way to go for all sorts of reasons - can someone PM me good raw sources?
 
Cipp21 said:
Combine EO and coconut oil, my favorite. You can make some really strong concentrations and it'll slide through a slin pin.
Click to expand...

So I have mct oil and I also have coconut oil and the coconut oil is used for cooking and it is a solid at room temp I haven't lookie day my mct oil in a while ( I was taking it as a supp) but I don't think it's coconut oil
 
First brew 13ml Deca at 250mg/ml done
3ezyryhy.jpg
 
Yeah was planning to do but filter got loose and I squirted away the rest.
Newbie mistake. Syringe filter and not holding all in place properly :)

Wont do that again.
 
I wanted to do 20ml at 250mg. Brewed away and filled a 20 syringe with my newly made Deca. Syringe filter on (.20) and needle in jug for pressure release as one should do. Started filtering without problem. At about 10 ml the pressure I needed on syringe got heavier. So I used my muscles :) and applied a bit more.
At 13ml approx i needed to up the pressure again. Didn't notice that the syringe filter started to disengage from syringe. So the filter flew off and the 7ml squirted all over.
Some harsh words came out and the filtrering was done. :)
So maybe 13 is my lucky nmbr hehe.
I'm sure I will not make this mistake again though.
I used 2% ba and 15%bb and 5 grams only of the powder so I have lots left to play with 😋
Next brew will be NPP at 100mg/ml. Just trying this one too at 20 ml. Need to learn first before bigger brews. And I have ordered bottletop filters for upcoming brews.
You guys wrote that one should try syringe filters to know how it feels. Now I know 😉
Thanks all for this thread and hopefully the knowledge spreads to me too 😷
 
wowstrongarms said:
This. Costs 40 bucks to get set up with a brake pump and bottle top filter. Zero reason to use a syringe filter. Unless you just seriously can't swing the extra 30 over buying a couple syringe filters
Click to expand...
Even less really. I got a hand brake bleed pump from Barbour freight for $7. Threw in a gauge for $3. Bottle tops are like 10.50$ thru med lab supply. Super easy and simple.

Eh hem , just don't move the vaccum hose mmmhmmmm cough sorry something was caught in my throat eh hem Matty. :)

KRAZIEONE
 
krazieone56 said:
even less really. I got a hand brake bleed pump from barbour freight for $7. Threw in a gauge for $3. Bottle tops are like 10.50$ thru med lab supply. Super easy and simple.

Eh hem , just don't move the vaccum hose mmmhmmmm cough sorry something was caught in my throat eh hem matty. :)

krazieone
Click to expand...
too soon!!!!!!
 
That's nothing had my filling machine get un calibrated and and had over 50g wasted on shop floor
 
krazieone56 said:
Really. How was packaging. Was everything labeled

KRAZIEONE
Click to expand...

Shipped as cosmetics, packaged great, inside the special metalish baggie everything was labeled.

This EQ was much darker than the other sources, I'm not sure what that means in terms of purity.

Also KZ what displacement value do you use for your EQ? 1ml = 1.18 grams correct? How do you account for this in the calculator, I want to be more spot on.
 
nsnmatty said:
Shipped as cosmetics, packaged great, inside the special metalish baggie everything was labeled.

This EQ was much darker than the other sources, I'm not sure what that means in terms of purity.

Also KZ what displacement value do you use for your EQ? 1ml = 1.18 grams correct? How do you account for this in the calculator, I want to be more spot on.
Click to expand...
Hmmm that's interesting on the color. Its usually a honey color.

Everything I've ever used says its one 1:1 because its in a liquid form as to the low melting point. Where did you get the 1.13? Eq is the only one I brew straight across. Pretty much just ba 3% and the carrier. Of choice. So like if I wanted 300 mg eq. I do 30 grams with 3ml ba and 67ml coconut oil. Are you doing it differently?

KRAZIEONE
 
krazieone56 said:
Hmmm that's interesting on the color. Its usually a honey color.

Everything I've ever used says its one 1:1 because its in a liquid form as to the low melting point. Where did you get the 1.13? Eq is the only one I brew straight across. Pretty much just ba 3% and the carrier. Of choice. So like if I wanted 300 mg eq. I do 30 grams with 3ml ba and 67ml coconut oil. Are you doing it differently?

KRAZIEONE
Click to expand...
It's just different shades of honey. One was very light the other a bit darker.

I weigh out the eq then divide by 1.18 to get the ml displacement. It worked out very nicely.

110ml Eq 400

d28631b8f068ccfb69bc939cbd4e98e2.jpg
 
nsnmatty said:
It's just different shades of honey. One was very light the other a bit darker.

I weigh out the eq then divide by 1.18 to get the ml displacement. It worked out very nicely.

110ml Eq 400

d28631b8f068ccfb69bc939cbd4e98e2.jpg
Click to expand...
Where did the 1.18 come from though. I havnt been able to find that conversion anywhere.

KRAZIEONE
 
nsnmatty said:
It's just different shades of honey. One was very light the other a bit darker.

I weigh out the eq then divide by 1.18 to get the ml displacement. It worked out very nicely.

110ml Eq 400

d28631b8f068ccfb69bc939cbd4e98e2.jpg
Click to expand...
NM. Just found it.

But they are saying take 1.18 grams and times it by .85. For your displacement. Is that what u did?

KRAZIEONE
 
Such selections, and lots to stock, though the base does seem to have possibilities. I felt the acetate was better do to the hazard shipping of liquid. All ways thought the undecylenate look a lot like m_ _ h oil. J
 
It's undecylenate. I'll post a pic after work today showing the difference in color between the two sources. I think I have like 130 ml of Eq400 hahahah
 
krazieone56 said:
Last three Lol. Hey! U never answered my question.

KRAZIEONE
Click to expand...

so 1 ml = 1.18g of eq

why would we then use a powder displacement of .85 to get the ml when if I weigh the eq out and lets say i do 100g and divide that by 1.18 I got like 85.75ml No need to use the .85 we already have the liquid amount of ml's. Its worked well for me that extra step of .85 doesn't make sense to me since its already liquid.
 
nsnmatty said:
so 1 ml = 1.18g of eq

why would we then use a powder displacement of .85 to get the ml when if I weigh the eq out and lets say i do 100g and divide that by 1.18 I got like 85.75ml No need to use the .85 we already have the liquid amount of ml's. Its worked well for me that extra step of .85 doesn't make sense to me since its already liquid.
Click to expand...
On steroid powder.com. under recipes. They do that. So I wondered if that where you got the 1.18 ratio. I wouldnt do the extra step. Just seeing where u got the 1.18

KRAZIEONE
 
krazieone56 said:
On steroid powder.com. under recipes. They do that. So I wondered if that where you got the 1.18 ratio. I wouldnt do the extra step. Just seeing where u got the 1.18

KRAZIEONE
Click to expand...

In all reality 1 for 1 wouldn't make much of a difference but I found 1.18 on multiple sites so I went with that.
 
thats a fuckton of eq u got there matty!!! is that all u brewed up recently?
did you ever decide if you were going to make some labels for your homebrew, i remember a while back you were interested in the idea.

u and krazie rubbing it in with your fresh batch and his pack of raws coming in lol
 
I figure I'll contribute a bit to this homebrew gear porn!

Just brewed up a small batch today, I usually try to keep it

B5AEEA5C-16D0-419E-87C5-16A0108BAF8E.jpg


First three are my own special blend of test phenylprop and test iso and the last two are Tren E.

Test Blend - 56ml @ 250mg/ml
Tren E - 45ml @ 225mg/ml

Super thin gear as well :)
 
Cipp21 said:
I figure I'll contribute a bit to this homebrew gear porn!

Just brewed up a small batch today, I usually try to keep it

B5AEEA5C-16D0-419E-87C5-16A0108BAF8E.jpg


First three are my own special blend of test phenylprop and test iso and the last two are Tren E.

Test Blend - 56ml @ 250mg/ml
Tren E - 45ml @ 225mg/ml

Super thin gear as well :)
Click to expand...

Looks awesome bro. I guess our man delivered, strange I got it first though. Were you happy with it?
 
nsnmatty said:
Looks awesome bro. I guess our man delivered, strange I got it first though. Were you happy with it?
Click to expand...

Really strange you got it first, kinda made me worried ha. Yea I was pretty happy with how everything looked, now I'm excited to run it! Hopefully in another 2-3 weeks.

Took a pic of the raws for you guys too:
5CB2BEE8-0E06-449C-B787-679278370EE0.jpg


Only thing I wasn't happy about was that they measured the hormone out right to the EXACT amount which sucks because it's very hard to get every little bit of it out of the baggie. I'm ised to getting just a little bit over weight.

Shhhhhhhhhhhh Kraz lol
 
And probably tomorrow I'll have more goodies to show you folks ...
1000g test e 1000g test cyp
Plus much more
 
Z28blak said:
And probably tomorrow I'll have more goodies to show you folks ...
1000g test e 1000g test cyp
Plus much more
Click to expand...
A kg order. Damn. This guy got me 200g in three days. May place a 500g order see how that goes.

Z what do you contribute that color difference in the eq too. It's usually light.
 
nsnmatty said:
A kg order. Damn. This guy got me 200g in three days. May place a 500g order see how that goes.

Z what do you contribute that color difference in the eq too. It's usually light.
Click to expand...

Honestly I think it will be fine I know with like tren powder the longer it's been sitting in the buckets to air it gets more yellow tint to it fresh stuff is like white powder maybe little tint of yellow

Mine has never been that light so try it and see
 
all you guys posting up gobs of raws....shame on you guys lol rub it in to the guy hoping for a week or 2 off so i can get everything set up for my mini lab.
 
sounds good to me, I havent tried eq yet and seeing that mile long line of bottles made me start to wonder lol.

cleared my inbox btw.
 
Z28blak said:
ge2ejane.jpg


And that's not even half
Click to expand...

Hey Bro, I noticed in the Center of the Picture, the Smaller White Pouches with the Red Emblem on the Top Left.
They look Identical to the ones I got from Our Missing Friend.
Has He been back in Touch, or are they just some Older ones................................... JP
 
jp4355 said:
Hey Bro, I noticed in the Center of the Picture, the Smaller White Pouches with the Red Emblem on the Top Left.
They look Identical to the ones I got from Our Missing Friend.
Has He been back in Touch, or are they just some Older ones................................... JP
Click to expand...

They are from pervious orders not the one he bailed on
 
Status
Not open for further replies.

Similar threads

WillyC
Is there a page on here dedicated to lab test results from different suppliers?
Replies
12
Views
90
ballin2504
ballin2504
W
xroids.to scammed for everything :(
Replies
10
Views
169
2Thick
2Thick
Pinch73
Best place to get peds
Replies
30
Views
240
LevButlerov
LevButlerov
milbous1
Merry Christmas Evo Family
Replies
13
Views
193
HarleyGuy
HarleyGuy
J
Chinese market?
Replies
16
Views
469
RoySimpson
RoySimpson
Back
Top Bottom