Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply US-PHARMACIES
UGL OZ UGFREAK OxygenPharm
napsgeargenezapharmateuticals domestic-supplyUS-PHARMACIESUGL OZUGFREAKOxygenPharm

Test C Slin Pin

Fill with a big syringe with an 18 Guage and pull the plunger and fill the slin pin carefully so as not to contaminate anything I do the same works well less scare tissue

Sent from my SM-G920W8 using Tapatalk
 
Why dangerous?

Are you using an actual insulin syringe or a 31 gauge? A insulin pin can break when used to inject IM if you aren't careful.

I personally have always really liked using a 25 or 27 5/8' for injecting deltoids. It can take a while to do the injection due to the small gauge but if you warm up the oil prior to the injection, it isn't that bad at all. I run the vial under hot water from the sink for 1-2 minutes before the injection to warm up the oil.
 
Tried shooting cyp in my delts with a slin pin, didn't work out too well. Took forever to push the plunger plus a decent amount of leakage.
 
Call me old-fashioned, but I prefer the classic needles, and it the pinch got me worried, I just use the 25-27g, and have no problems at all.
 
don't draw with a slin pin .. just load it and then pin

I have zero issues with using slin pins if you are doing small amounts of gear. its not the on paper way to do it but it still works just the same, but expect some oil clumping
 
I do slin pins for delts. It wont break unless its a crappy needle. lol they are meant to kink and bend. Just be careful.
 
Backload the slin pin with a normal syringe bro.. Make sure you press in pretty good to hit the muscle


Sent using Tapatalk
 
It better be a longer sling pin or your going to get a big knot when it don't go into tge muscle. Personally I prefer a 1" 25g for delts.
 
Draws smooth and easy. Pins the same. Done it hundreds of times. I like watching the oil trickle down the inside of the barrel. Dare to be different.
 
Are you using an actual insulin syringe or a 31 gauge? A insulin pin can break when used to inject IM if you aren't careful.

I personally have always really liked using a 25 or 27 5/8' for injecting deltoids. It can take a while to do the injection due to the small gauge but if you warm up the oil prior to the injection, it isn't that bad at all. I run the vial under hot water from the sink for 1-2 minutes before the injection to warm up the oil.

This is what I do.. 5/8-25g
 
Back
Top Bottom