med tech eq max

[leam_nffc]

Is med tech solutions eq max 500mg boldenone per ml even possible??

 

[muskate]

Scientifically, it is possible to create that dosage, yes.

I have never used it personally however. I am curious as to how much PIP it would cause. Hopefully someone who has used it can shed some light on that.

 

[leam_nffc]

Scientifically, it is possible to create that dosage, yes.

I have never used it personally however. I am curious as to how much PIP it would cause. Hopefully someone who has used it can shed some light on that.

Thankyou mate... I pinned it on Thursday night and I only felt a little pip 2 days later but nothing major... do you rate med tech solutions

 

[OceanusLabs]

500mg means they would probably used alot of guicol which can cause PIP. Med Tech are reputable, but in general I wouldnt rate claims of 500mg a vial.

 

[Blueberryshake]

I got 400mg/ml in my own just by using 2% BA and 10%BB. I have no doubt that 500mg is possible without guacicol.you a little bit of EO but not much

 

[Masonic Bodybuilder]

Sounds like the pip would be brutal. I like lower concentration eq because it makes injections smooth when adding other compounds like test to it.

 

[stevesmi]

I would do half CC twice a week

and I would dilute it with another compound in the syringe

I've used 300mg/ml EQ before and the PIP was non existant

 

[snakeman]

At room temp, EQ raws are like maple syrup consistency. 500mg/ml is totally attainable and with little PIP as it will not crystalize at all. Test E is also easy to get high concentrations due to melting point being like 85 F. I have some 400 EQ and it is a bit thick, I think its GSO with BB and BA only. If I were to make it for myself I would add significant EO just to thin it out.

 

[jp4355]

If you bought any Med-Tech Solutions Products.
You most likely got some Underdosed Bullshit.

I just saw some Lab Reports on 2 of their Products.
And Both of these should have at least Tested Exactly what the Label said, or a little over.

Both are Underdosed.

Med-Tech Tren E - 200 Mg/Ml ~ tested @ 160.2 Mg/Ml
Batch #0715 Serial #9y7vp47tpj.

Med-Tech Anapolan (oxymetholone) 50 Mg Tablet ~ tested @ 34.3 Mg per Tablet
Batch #Oxy2315

Testing was done at SIMEC AG laboratory.
They performed the HPLC-UV quantitative dosage testing.

So if they can't make the Less Expensive Hormones to what their Label Proclaims.
I bet that Boldenone doesn't even come close to 500 Mg/Ml.
I would be extremely surprised if it even tested @ 400 Mg/Ml................................................................. JP

 

[Ripped_Grizzly]

If you bought any Med-Tech Solutions Products.
You most likely got some Underdosed Bullshit.

I just saw some Lab Reports on 2 of their Products.
And Both of these should have at least Tested Exactly what the Label said, or a little over.

Both are Underdosed.

Med-Tech Tren E - 200 Mg/Ml ~ tested @ 160.2 Mg/Ml
Batch #0715 Serial #9y7vp47tpj.

Med-Tech Anapolan (oxymetholone) 50 Mg Tablet ~ tested @ 34.3 Mg per Tablet
Batch #Oxy2315

Testing was done at SIMEC AG laboratory.
They performed the HPLC-UV quantitative dosage testing.

So if they can't make the Less Expensive Hormones to what their Label Proclaims.
I bet that Boldenone doesn't even come close to 500 Mg/Ml.
I would be extremely surprised if it even tested @ 400 Mg/Ml................................................................. JP

What? This is bad news, Im on their test e and EQ Max at the moment. . Been on for three weeks, will do bloods in a couple of weeks before I switch to their tren. Will update when blood results are received.

 

[stevesmi]

there are a ton of bad gear out there.. not a shock

 

[Fella Finn]

What? This is bad news, Im on their test e and EQ Max at the moment. . Been on for three weeks, will do bloods in a couple of weeks before I switch to their tren. Will update when blood results are received.

Well, I do hope the quality has improved since then...