Vial has speck in it

[maximumeffort]

Hi so my vial of test e recently got a weird looking speck in it. There was no speck before I withdrew but i noticed it/appeared when I pushed some oil back into the vial


Sent from my iPhone using Tapatalk

 

[maximumeffort]

Should i be worrying about this?


Sent from my iPhone using Tapatalk

 

[maximumeffort]

Bump. Anyone?


Sent from my iPhone using Tapatalk

 

[Mobster]

See the home brew thread for a suggestion which might be useful.

 

[maximumeffort]

The test is not homebrew the speck or whatever it is became visible after i withdrew from the vial


Sent from my iPhone using Tapatalk

 

[Mobster]

Could it be part of the rubber stopper that's snagged on the pin then, as you put oil back in, you've squirted it back? If so just take care to tip the amp/bottle to one side, let it settle and be careful not to draw it up. It should be sterile but...

 

[maximumeffort]

It could be possible. It looks less like stopper and more of a fragment of the actual oil its not that dark but looks separate compared to the rest of the oil


Sent from my iPhone using Tapatalk

 

[Mobster]

It sounds like a tiny bit of the rubber seal / stopper. Short of opening the whole damn thing (and thus exposing it... not good) to filter it go with what I said. One trick is to turn the whole thing upside down - let it drop to the bottom, then stick the pin and draw off near the top. I've NEVER ever got every little drop out so that last tiny bit is where we ant your fragment to be. It won't kill you if you inject it (into fatty tissue etc) but why risk it?

 

[maximumeffort]

Yea debating to toss the vial or not...i really dont think its part of the stopper and it wasnt there when I got the vial so must be okay


Sent from my iPhone using Tapatalk

 

[The-Kiwi]

Itl be the stopper, the gears got ba in it and there's no way itl go up a 25 gauge pin, its fine.. Just use it

 

[maximumeffort]

Itl be the stopper, the gears got ba in it and there's no way itl go up a 25 gauge pin, its fine.. Just use it

It doesnt look like the stopper at all it doesnt look like a solid object


Sent from my iPhone using Tapatalk

 

[stevesmi]

i have had the rubber get in.. ask your source about this. i'm sure you aren't the first person to complain about this!!

if you are gonna stress out enough to post up 5X on it, why not just toss it..

 

[maximumeffort]

Your right will prolly just toss it got 4cc out of it dont wanna take the risk


Sent from my iPhone using Tapatalk

 

[The-Kiwi]

The gear has ba in it so itl be sterile and the spek won't fit up a 25g pin, why worry

 

[LevButlerov]

I agree with @kiwi - there is no way this thing could get in a pin, so there is real need to worry, and you can still use your gear. Of course, if this is more recomforting for you, you can ditch the gear.

 

[Mobster]

It doesnt look like the stopper at all it doesnt look like a solid object


Sent from my iPhone using Tapatalk

You ever seen the film 'The Fantastic Voyage'? Look real close... closer... closer... can you see me? I'm waving at you from my tiny submarine in your gear ha ha

 

[muskate]

I personally feel that the gear is still safe to use. Whatever that small particle is, it'll be too large to be withdrawn by the withdrawal needle tip so you really don't have anything to worry about.

If you are overly concerned though, just throw the vial out. 4mL isn't worth stressing yourself out about. That's like 30-40 bucks.

 

[Masonic Bodybuilder]

This exact thing happens to me because I have 18g needles I draw with. Those harpoons break off stopper from time to time. I inject with a 23g and that is even too small to suck the piece up. I say you are good to go.

 

[upl101]

Really common bro, the rubber stopper most likely. You'll be okay to use it, but You
must be sure to examine it to make sure its 100% safe. If it really does look out of wack i wouldn't use it. Id rather be safe than sorry.