Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply US-PHARMACIES
UGL OZ UGFREAK OxygenPharm
napsgeargenezapharmateuticals domestic-supplyUS-PHARMACIESUGL OZUGFREAKOxygenPharm

New lab looking to give away some goodies!!!!

A

AdvancedGrowthLabs

Newbie Brother
Registered
Alright, hopefully that has everyone's attention. I'm looking to give away 4 different cycles.

1- 2 bottles test e/tren e.
2- 2 bottles test e/70 caps anadrol.
3- 2 bottles test e/70 caps dbol
4- 3 bottles test e

Dbol/anadrol are both dosed at 25mg a cap. How you dose said cycles is up to you. Every cycle listed has enough juice to run at moderate doses for 10 weeks(5 weeks of orals at standard dosing protocol). If you choose to dose higher and blast it out sooner, or use lower doses and take it out longer, that's all up to you. All I ask is for you to post up your dosing plan if you win.


Before I go any further, here's just a little tidbit on how I plan on doing things. First off, I am not looking to turn this into a full time gig. I plan on taking on customers for a few months, and then going private. I have a full time job already, and I am not some crummy ugl who is going to sacrifice quality for quantity, period.






Alright as far as picking winners, obviously I'm looking for guys who are experienced. If you are new to the roid game please hold off on posting. I'm looking for a few guys who know what to expect as far as gains, pip, and sides go. Winners would be expected to log this. I'm not looking for detailed logs of every single lift, and every single meal you eat. Just updating every couple days on sides, weight gain, strength, and just other general things to show whether my gear is good or bunk.

Please post up: Height, weight, your goal(bb'ing or powerlifting), and your experience level. If there are any of the 4 cycles you would not want to run, just post which ones. You'll still be in the running for the others.







I will let this contest run until mid next week. When I choose the winners I'll post up the names and cycles they have won. Let the postings begin!! And may the odds for ever be in your favor.
 
Do you have any pictures of the gear so we can know what it is we are working at. Also oil type, and ratio of the test and the blend.
 
Stats:
6'2
240
11-12%

Bodybuilding, a lot of cycle experience

I'm currently cruising on test 250mg EW, peptides and sarms. I am going to run test e/tren e during my next blast and I run excellent logs. I'm experienced with almost every common steroid and I love me some tren.

Since it's almost spring, I can do without the anadrol and dbol bloat so I won't be running those. Test/tren is what I'm set on running


And, welcome to EVO. This is how a source should introduce themselves people!!
 
Last edited:
paja said:
Really for free wow nice instroductiom bro
Click to expand...
I guess I'm old school, but I think you should prove yourself before selling anything.
Yeezus said:
Do you have any pictures of the gear so we can know what it is we are working at. Also oil type, and ratio of the test and the blend.
Click to expand...
Lol. Can't believe I forgot that info. Test e/Tren e are both 250mg/ml. 100% GSO on both. Test has 2/10 ba/bb. Tren is 2/18. I'll get some pics posted up either tonight or tomorrow.

To start with all my gear will be 100% GSO. Then if I get frisky and mess with blends I'll add in some EO. If it has EO I will make it known though. I know some people have bad reactions, and everyone should know what is in their gear anyways.

jbranken said:
Stats:
6'2
240
11-12%

Bodybuilding, a lot of cycle experience

I'm currently cruising on test 250mg EW, peptides and sarms. I am going to run test e/tren e during my next blast and I run excellent logs. I'm experienced with almost every common steroid and I love me some tren.

Since it's almost spring, I can do without the anadrol and dbol bloat so I won't be running those. Test/tren is what I'm set on running


And, welcome to EVO. This is how a source should introduce themselves people!!
Click to expand...

Perfect template for the info, and thanks for the welcome!





I'll have a complete price list of all my initial offerings made up within a day or 2 for those interested. I will not take any orders until the winners are 2-3 weeks in, and at the very least seeing some gains rolling in.
 
Stats
5'11
217lbs
Strong 13% because of bulk season.

Currently just on 500mgs test c, was testing out a new source. Looking to do a tren blast in the next month or two.

Six years lifting. Trying to get physique pro card. Eventually will try for bb pro card.

Set on tren for the spring thaw and competition season.

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 
Sounds good. We like to hear about quality over quantity here. Can't argue with that. Good luck
 
Perfect introduction. Very upfront and open. Set criteria. Can't wait to see some pics.

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 
Just curious on the formulas...why did you chose to go with those amounts of BB? I know everybody has their own opinions on percentages so just picking your brain.

Thanks and good luck!
 
AdvancedGrowthLabs said:
I guess I'm old school, but I think you should prove yourself before selling anything.

Lol. Can't believe I forgot that info. Test e/Tren e are both 250mg/ml. 100% GSO on both. Test has 2/10 ba/bb. Tren is 2/18. I'll get some pics posted up either tonight or tomorrow.

To start with all my gear will be 100% GSO. Then if I get frisky and mess with blends I'll add in some EO. If it has EO I will make it known though. I know some people have bad reactions, and everyone should know what is in their gear anyways.



Perfect template for the info, and thanks for the welcome!





I'll have a complete price list of all my initial offerings made up within a day or 2 for those interested. I will not take any orders until the winners are 2-3 weeks in, and at the very least seeing some gains rolling in.
Click to expand...

True my brother good luck that the way how to do business
 
mh48500 said:
Just curious on the formulas...why did you chose to go with those amounts of BB? I know everybody has their own opinions on percentages so just picking your brain.

Thanks and good luck!
Click to expand...
10% on test e just because it makes me feel good on the inside. I've made it without an bb, but the idea of it crashing in depo is why I add it still. Also I just feel like it flows smoother with it. I used to make tren at 15% bb, but one night(on dnp) I left the windows open and it got down to prob 30 degrees. Next morning I noticed all my tren had started to crash and crystallize. Bumped it up to 18% and never have seen that again. A quick hot water bath put it back in solution, but that just wouldn't look good if someone not as knowledgeable saw that ya know?
Redam said:
Any pictures or labs on it? I'm always interested
Click to expand...
I'll have some pics up in a day or two.
Redam said:
If I wasn't new if totally do it lol
Click to expand...
If that's you in the display pic toss up your info. Look plenty advanced enough to me.
 
I've used some gear for a while lol I like have fun like my other brothers here! I wouldn't say I'm a vet here but I've been here for a while!

But I'm

5'9.5" don't forget that half inch! Lol

I'm sitting at around 180 right now! Probably around 13% bf ATM bulking season.

I'm a bodybuilder looking to get ready for the next show. Haven't decided when it will be though.

I've been using gear for some time now and I wouldn't say I'm a expert like my brothers paja and analog but I have a great knowledge!

Btw you have some good apps so far! I can vouch for jbranken and matty! They are some good brothers!

Cheers brother and welcome! Btw nice entrance to the forums! Looking forward to seeing peoples logs and blood works done!
 
Well u picked the right place to have your product tested....got some great brothers on here!
 
Redam said:
I've used some gear for a while lol I like have fun like my other brothers here! I wouldn't say I'm a vet here but I've been here for a while!

But I'm

5'9.5" don't forget that half inch! Lol

I'm sitting at around 180 right now! Probably around 13% bf ATM bulking season.

I'm a bodybuilder looking to get ready for the next show. Haven't decided when it will be though.

I've been using gear for some time now and I wouldn't say I'm a expert like my brothers paja and analog but I have a great knowledge!

Btw you have some good apps so far! I can vouch for jbranken and matty! They are some good brothers!

Cheers brother and welcome! Btw nice entrance to the forums! Looking forward to seeing peoples logs and blood works done!
Click to expand...
Post up which cycles you'd be willing to run then! Haha

You don't have to be on the verge of a pro card. Just looking for guys with a couple years experience lifting, and a few cycles under your belt. Nothing crazy, just someone who can actually give a review other then, "oh merr gawd steroids is awesome".
 
Im tempted to put my info
In but I'm getting tired of running so many reviews at the moment.
Everything needs a break.
 
paja said:
So you looking for brothers with experience what kind of cycle are you offer bro????
Click to expand...

1- 2 bottles test e/tren e.
2- 2 bottles test e/70 caps anadrol.
3- 2 bottles test e/70 caps dbol
4- 3 bottles test e

^ these four paja
 
Redam said:
Yeezus bro put one in lol
Click to expand...

Already did 4 reviews in the last two months. Lol how many more do u guys wanna pin on me. Lol I tired and the only thing he could offer is something with tren... But I would prefer tren ace to be honest.
 
Lol no I'm serous brothers I got a few big projects for my brothers in EVO coming soon brothers know when I said something is g2g that mean is really good
 
Yeezus said:
Already did 4 reviews in the last two months. Lol how many more do u guys wanna pin on me. Lol I tired and the only thing he could offer is something with tren... But I would prefer tren ace to be honest.
Click to expand...

Lol loggin is fun in a way. But we need some good brothers lol im evil so no log for mw
 
AdvancedGrowthLabs said:
10% on test e just because it makes me feel good on the inside. I've made it without an bb, but the idea of it crashing in depo is why I add it still. Also I just feel like it flows smoother with it. I used to make tren at 15% bb, but one night(on dnp) I left the windows open and it got down to prob 30 degrees. Next morning I noticed all my tren had started to crash and crystallize. Bumped it up to 18% and never have seen that again. A quick hot water bath put it back in solution, but that just wouldn't look good if someone not as knowledgeable saw that ya know?

I'll have some pics up in a day or two.

If that's you in the display pic toss up your info. Look plenty advanced enough to me.
Click to expand...

Are we cooking in the kitchen or what !


Caaannn Uuuu Diigg It ?
 
paja said:
My king Analogman and me open the doors for brothers that are looking for real vit 100% pharmaceutical next step hcg and some....... Big surprise brother
Click to expand...

I like how you two are here for us! I gotta step my game up lol
 
This could be a Birthday present for me, since it'll be my birthday in 2 days.
Age 61 in 2 days
Ht. 6'
Wt. 204 lbs.
BF 11 - 12%
Years training - 40 +
Cycle's - I don't remember them all...........................................JP
 
I am pretty sure my Brother Paja will be one of the chosen one he deserved ..
 
Lol we are just playing around brother! Honestly I just want to see people give honest reviews like always!
 
Let's get some more applicants in this bish. This is free gear and this guy seems pretty damn confident about his product which I'm liking a lot.

I vote for all of you! You all deserve some gear :) If I don't get it I won't cry. I'm loaded up on test and tren lol. Let's see some damn participation
 
I vote for Yeezus, Jbranken and Jp. Any of those bros review you know it's going to be an unbiased, in depth, and accurate log. Paja isn't even a question in my mind, if he wanted to review.


Sent from my iPhone using Tapatalk
 
AdvancedGrowthLabs said:
Before I go any further, here's just a little tidbit on how I plan on doing things. First off, I am not looking to turn this into a full time gig. I plan on taking on customers for a few months, and then going private. I have a full time job already, and I am not some crummy ugl who is going to sacrifice quality for quantity, period.

Alright as far as picking winners, obviously I'm looking for guys who are experienced. If you are new to the roid game please hold off on posting. I'm looking for a few guys who know what to expect as far as gains, pip, and sides go. Winners would be expected to log this. I'm not looking for detailed logs of every single lift, and every single meal you eat. Just updating every couple days on sides, weight gain, strength, and just other general things to show whether my gear is good or bunk.

Please post up: Height, weight, your goal(bb'ing or powerlifting), and your experience level. If there are any of the 4 cycles you would not want to run, just post which ones. You'll still be in the running for the others.

I will let this contest run until mid next week. When I choose the winners I'll post up the names and cycles they have won. Let the postings begin!! And may the odds for ever be in your favor.
Click to expand...

I think all you will get is newbies. Vets have their sources.

And just who are you anyway? Who knows you? Who has used you? What vets will vouch for you? How do we know you are not some "crummy UGL?" Why should we just trust you because you say so?
 
Redam said:
I nominate yeezus jb nsn and jp
Click to expand...

Araris said:
I vote for Yeezus, Jbranken and Jp. Any of those bros review you know it's going to be an unbiased, in depth, and accurate log. Paja isn't even a question in my mind, if he wanted to review.


Sent from my iPhone using Tapatalk
Click to expand...

Stop putting me! I'm not looking to run any of those. Lol i didn't even put my info in. You guys deserve to have it all more then i do. As long as you guys do the work for the gear.

It's sad to see ugls (pretty much all the ones on here) give away product for posted reviews and like no one does them... How come I always gotta be the one to follow through lol 🙌
 
jbranken said:
And, welcome to EVO. This is how a source should introduce themselves people!!
Click to expand...

It's definitely one way. Probably a way to become popular right off the bat. I just wonder though. He asked for stats...but nobody asked for his stats since he threw out free gear. It's your body. Maybe his stuff will be better than princess' test e? I hope!

nsnmatty said:
Perfect introduction. Very upfront and open. Set criteria.
Click to expand...

Really? I didn't get much out of it. Hmm...maybe I missed something?

Redam said:
If I wasn't new if totally do it lol
Click to expand...

That sounds very reasonable.

AdvancedGrowthLabs said:
If that's you in the display pic toss up your info. Look plenty advanced enough to me.
Click to expand...

But how advanced are you? How long you been brewing? How long you been selling your homebrewed gear? How do we know any of what you say is true?

jbranken said:
1- 2 bottles test e/tren e.
2- 2 bottles test e/70 caps anadrol.
3- 2 bottles test e/70 caps dbol
4- 3 bottles test e

^ these four paja
Click to expand...

Those aren't cycles! More like appetizers! I thought those were for cruising. LOL!

jbranken said:
This is free gear and this guy seems pretty damn confident about his product which I'm liking a lot.
Click to expand...

Princess was very confident about her Test E too. Ask Flip Digler how that went. I have another buddy that just got over his infection.
 
ceo said:
I think all you will get is newbies. Vets have their sources.

And just who are you anyway? Who knows you? Who has used you? What vets will vouch for you? How do we know you are not some "crummy UGL?" Why should we just trust you because you say so?
Click to expand...

I like this question....sounds like homebrew to me

Sent from my HTC One VX using Tapatalk
 
ceo said:
It's definitely one way. Probably a way to become popular right off the bat. I just wonder though. He asked for stats...but nobody asked for his stats since he threw out free gear. It's your body. Maybe his stuff will be better than princess' test e? I hope!



Really? I didn't get much out of it. Hmm...maybe I missed something?



That sounds very reasonable.



But how advanced are you? How long you been brewing? How long you been selling your homebrewed gear? How do we know any of what you say is true?



Those aren't cycles! More like appetizers! I thought those were for cruising. LOL!



Princess was very confident about her Test E too. Ask Flip Digler how that went. I have another buddy that just got over his infection.
Click to expand...

Lmao! Cold blooded. But necessary questions for sure. It is always risky using a new UGL
 
dirtydeed said:
I like this question....sounds like homebrew to me

Sent from my HTC One VX using Tapatalk
Click to expand...

Brother, they come here to this open source board and toss out free gear and people forget all common sense just to get a taste.
 
Ceo comes to speak sense to us. He's right about princesses test e debacle. He looked out for us with blurock initially as well. Thanks for jumping in brother. We do need much more information

Sent from my SAMSUNG-SGH-I747 using Tapatalk
 
As cold blooded as CEO can seem sometimes, I for one am happy he's lookin out for all of us. He's holding these new sources's hands to the fire, so we can get as much info as possible and see them under pressure to know if they actually know their shit. I went against CEO's advice once and I ended up in bed for 4 days on that Orion test E. A mistake I will not duplicate. Thank you brother for lookin out for us.


Sent from my iPhone using Tapatalk
 
Good night bro's, you got it CEO in the house.............AnalogMan
Click on"CEO
 

Attachments

  • anger.webp
    anger.webp
    17 KB · Views: 151
ceo said:
At least he didn't say his oil was a "top secret blend" that even BigPharma doesn't have.

Still not enough though. Not for me anyway. Doubt I will get what I am asking for from him.
Click to expand...

What ever happened to blue rock? Are they still around?


Sent from my iPhone using Tapatalk
 
Blurocklabs are still around and there test p is good to go, can't speak for the rest of it but I am confident that it is good as well.

As always CEO good questions to this new source, hopefully he comes back and answers your questions truthfully.


Sent from my iPhone using Tapatalk
 
25
5'10
182
11%
Been lifting for 7 years. 4 cycles under belt and looking to do number 5 in the next couple weeks. 350 bench, 515 dead, 405 squat @185lbs


Sent from my iPhone using Tapatalk
 
I can't believe that know one got my kitchen comment after he spoke about leaving his window open and his tren crashed ? Not only that , then I went and reposted Professor Analogs thread about " questions to ask new ULG " and not one question was asked !

In no way is this to offend any brothers but we need to ask these questions , and then of course we can get CEO to dig into him lake a bad abscess !


Caaannn Uuuu Diigg It ?
 
ceo said:
I think all you will get is newbies. Vets have their sources.

And just who are you anyway? Who knows you? Who has used you? What vets will vouch for you? How do we know you are not some "crummy UGL?" Why should we just trust you because you say so?
Click to expand...
Who am I? Someone who has never been a part of the online community on the selling side. Thus far the only people I have dealt with are a few close friends as well as myself.

As for the last 2 questions, you don't and should not. Absolutely no way for me to prove either until the gear is in the hands of other people and they provide their honest opinions.

dirtydeed said:
I like this question....sounds like homebrew to me

Sent from my HTC One VX using Tapatalk
Click to expand...
Of course. I don't know of anyone with access to/willing to brew in a lab setting. Thats just asking for trouble even if you did have the access.


Flip Digler said:
I can't believe that know one got my kitchen comment after he spoke about leaving his window open and his tren crashed ? Not only that , then I went and reposted Professor Analogs thread about " questions to ask new ULG " and not one question was asked !

In no way is this to offend any brothers but we need to ask these questions , and then of course we can get CEO to dig into him lake a bad abscess !


Caaannn Uuuu Diigg It ?
Click to expand...
Gear is kept in my room, and that is where it crashed. To answer your question though, yes brewing is done in the kitchen. ALL surfaces are cleaned with chlorox/alcohol. Surfaces that any brewing materials will be placed on get the same+ 2 hours of dry heat.
 
AdvancedGrowthLabs said:
Who am I? Someone who has never been a part of the online community on the selling side. Thus far the only people I have dealt with are a few close friends as well as myself.

As for the last 2 questions, you don't and should not. Absolutely no way for me to prove either until the gear is in the hands of other people and they provide their honest opinions.


Of course. I don't know of anyone with access to/willing to brew in a lab setting. Thats just asking for trouble even if you did have the access.



Gear is kept in my room, and that is where it crashed. To answer your question though, yes brewing is done in the kitchen. ALL surfaces are cleaned with chlorox/alcohol. Surfaces that any brewing materials will be placed on get the same+ 2 hours of dry heat.
Click to expand...

Props ! That all I got to say !


Caaannn Uuuu Diigg It ?
 
See this is what happens when I work too much.. I miss all the fun, haha and I need to throw away orions Test E
that I would of started Sunday. Its cool we are getting new ugls just sucks playing the please dont get me
infected or killed game.

P.s
Thumbs up CEO lol
 
Iv been in a lean slow bulk mode for the past few months but hell teste and Andral I will put 30 pounds on in 4 weeks very interested hope it's still going on. I a very thorough Logger, you won't be disappointed with my results or monologues please give me the opportunity like I said you will not be disappointed
 
Gearhead13 said:
Iv been in a lean slow bulk mode for the past few months but hell teste and Andral I will put 30 pounds on in 4 weeks very interested hope it's still going on. I a very thorough Logger, you won't be disappointed with my results or monologues please give me the opportunity like I said you will not be disappointed
Click to expand...

Sounds good bro but you need to lay it out like I did on the first page with stats, cycle history, etc
 
AdvancedGrowthLabs said:
Who am I? Someone who has never been a part of the online community on the selling side. Thus far the only people I have dealt with are a few close friends as well as myself.

As for the last 2 questions, you don't and should not. Absolutely no way for me to prove either until the gear is in the hands of other people and they provide their honest opinions.


Of course. I don't know of anyone with access to/willing to brew in a lab setting. Thats just asking for trouble even if you did have the access.


Gear is kept in my room, and that is where it crashed. To answer your question though, yes brewing is done in the kitchen. ALL surfaces are cleaned with chlorox/alcohol. Surfaces that any brewing materials will be placed on get the same+ 2 hours of dry heat.
Click to expand...

So how long have you been part of the community on the non-selling side?
How long you been brewing gear?
You keep gear in your room? Do you live with parents? Roommates? How old are you?
So basically you are new to this and looking for guinea pigs?
How did you pick your powder supplier?
Tell us what grade of oils you use?
Tell us about your processes. Sterilization? Filtering?
What kind of equipment are you using?

Got any pics? :)

Do they look like this?
lab3.jpg

lab2.jpg

lab4.jpg
 
AnalogMan said:
I really Love CEO, he knows that....I'm just trying to keep his BP down..........AnalogMan
Click to expand...

God help the poor soul who cuts him off in gridlock in a rainy day on the way to the gym


Sent from my iPhone using Tapatalk
 
fizzisnumerouno said:
God help the poor soul who cuts him off in gridlock in a rainy day on the way to the gym


Sent from my iPhone using Tapatalk
Click to expand...

Rain?? What's that? LOL!

It never rains in Southern California (they tell me).

Really though, we are in a severe drought right now.
 
ceo said:
Rain?? What's that? LOL!

It never rains in Southern California (they tell me).

Really though, we are in a severe drought right now.
Click to expand...

"Really though" ^+1 for keeping the right and necessary questions flowing.


Sent from my iPhone using Tapatalk
 
ceo said:
So how long have you been part of the community on the non-selling side?
How long you been brewing gear?
You keep gear in your room? Do you live with parents? Roommates? How old are you?
So basically you are new to this and looking for guinea pigs?
How did you pick your powder supplier?
Tell us what grade of oils you use?
Tell us about your processes. Sterilization? Filtering?
What kind of equipment are you using?

Got any pics? :)
Click to expand...

I have been apart of several different online forums for 5 or 6 years now. No, I will not provide my user name or which forums. Over the years I've let slip one to many things hinting towards my main occupation. Having that associated with an account talking about gear is one thing, selling is a whole different thing.

Brewing for 3 years. A year or a year and a half was only for me. Then I started hooking up a couple close buddies as well. I'd sell them anything off the batches I didn't want and they'd use what they wanted and sell the rest.

Yes I keep my gear in my room. Keeping it tucked in away in my closet is much safer than leaving it else where in the house. Guests are nosy, but they respect personal bedrooms. I live alone. Age? Again personal info I am not sharing.

I've been using my own gear for years, so no I don't consider selling it as finding guinea pigs.

I picked my supplier by the recommendations of many others I met online. After brewing and noticing the same/better results from other ugl's I've used I felt the recommendations well placed.

I use usp grade oils. I get everything from med lab.

Sterilization. As I said before everything near the work area gets hit with bleach, alcohol. Anything metal/glass gets the same plus 2 hours dry heat. Vials get hit with soap/distilled water/alcohol/2 hours at 400 in the oven(why 2 hours at 400 instead of an hour at 350? why not? I use this stuff too). Vials are covered in tinfoil that was hit with alcohol+dry heat already. As well as the cookie sheets I place them on. Obviously I take the time to clean the oven with the same process before I start disinfecting anything in it. .2 nalgene nylon filter units are used. I send everything through a glass pre filter so I can use less psi and prevent busting the bottoms while keeping a decent flow rate.

And no I can't say I take pics of my setup.
 
ceo said:
So how long have you been part of the community on the non-selling side?
How long you been brewing gear?
You keep gear in your room? Do you live with parents? Roommates? How old are you?
So basically you are new to this and looking for guinea pigs?
How did you pick your powder supplier?
Tell us what grade of oils you use?
Tell us about your processes. Sterilization? Filtering?
What kind of equipment are you using?

Got any pics? :)

Do they look like this?
lab3.jpg

lab2.jpg

lab4.jpg
Click to expand...

Thats nicer than my kitchen sink, lol.
 
How come this sounds so much more believable then some of the other UGL that have come on here telling us they have some top secret lab built under a giant washing machine , and a retired scientist that just dosent like playing bingo anymore ?

Keep it real man ! I can dig it !


Caaannn Uuuu Diigg It ?
 
I really hope your not using safe mail ! It's a very insecure setup and has been having lots of vanilla reload numbers and greendot money pack numbers stripped right out from the users. Annonymousspeach or countermail are
Much safer. And not free!!
 
AdvancedGrowthLabs said:
I have been apart of several different online forums for 5 or 6 years now. No, I will not provide my user name or which forums. Over the years I've let slip one to many things hinting towards my main occupation. Having that associated with an account talking about gear is one thing, selling is a whole different thing.

Brewing for 3 years. A year or a year and a half was only for me. Then I started hooking up a couple close buddies as well. I'd sell them anything off the batches I didn't want and they'd use what they wanted and sell the rest.

Yes I keep my gear in my room. Keeping it tucked in away in my closet is much safer than leaving it else where in the house. Guests are nosy, but they respect personal bedrooms. I live alone. Age? Again personal info I am not sharing.

I've been using my own gear for years, so no I don't consider selling it as finding guinea pigs.

I picked my supplier by the recommendations of many others I met online. After brewing and noticing the same/better results from other ugl's I've used I felt the recommendations well placed.

I use usp grade oils. I get everything from med lab.

Sterilization. As I said before everything near the work area gets hit with bleach, alcohol. Anything metal/glass gets the same plus 2 hours dry heat. Vials get hit with soap/distilled water/alcohol/2 hours at 400 in the oven(why 2 hours at 400 instead of an hour at 350? why not? I use this stuff too). Vials are covered in tinfoil that was hit with alcohol+dry heat already. As well as the cookie sheets I place them on. Obviously I take the time to clean the oven with the same process before I start disinfecting anything in it. .2 nalgene nylon filter units are used. I send everything through a glass pre filter so I can use less psi and prevent busting the bottoms while keeping a decent flow rate.

And no I can't say I take pics of my setup.
Click to expand...

One word.......Autoclave. Sorry I am a long time homebrewer myself and if you are now moving to the serious side you really need to invest in an autoclave as a bare minimum, and that is just the beginning. I looked into to possibility of putting a small clean room together, like the kind in compounding pharmacies, and the more you learn the more you realize just cleaning or baking shit will not be near good enough. Here is a little info on the USP 797 standard for a compounding pharmacy, which would probably be a bare minimum for a UG......

What Is The USP 797 Compliance Standard For Non-viable Particulates?

In critical areas, such as Class 100 or ISO 5 (the area in immediate proximity of exposed sterilized containers/closures and filling/closing operations), the particle per cubic meter must be no more than 3520 particles/m3 in a size of 0.5 micrometers or larger when counted at representative locations normally not more than 1 foot away from the work site, within the airflow, and during filling/closing operations. In critical areas such as Class 100 or ISO 5 (area in immediate proximity of exposed sterilized containers/closures and filling/closing operations), the particle per cubic meter must be no more than 3520 particles/m3 in a size of 0.5 micrometers or larger when counted at representative locations normally not more than 1 foot away from the work site, within the airflow, and during filling/closing operations. Supporting areas, or clean room areas where the laminar flow stations are located, must meet at least Class 100,000 (ISO 8) air quality. See table below.
Clean Air Classification ISO Designation ≥ 0.5 µm particles/m3
100 5 3,520
1,000 6 35,200
10,000 7 352,000
100,000 8 3,520,000

The nature of your activities conducted in a supporting clean room area determines its classification. USP 797 requires that the area immediately adjacent to the aseptic processing line meet, at a minimum, Class 10,000 (ISO 7) standards under dynamic conditions. Manufacturers can also classify this area as Class 1,000 (ISO 6) or maintain the entire aseptic filling room at Class 100 (ISO 5). An area classified at a Class 100,000 (ISO 8) air cleanliness level is appropriate for the anteroom used for garbing.
 
Inhuman2012 said:
I really hope your not using safe mail ! It's a very insecure setup and has been having lots of vanilla reload numbers and greendot money pack numbers stripped right out from the users. Annonymousspeach or countermail are
Much safer. And not free!!
Click to expand...

I have not even set up an email for such yet. Thanks for the info though. All selling will be done through a thumb drive booting mirrored tails on tor, as well as being encrypted. Shipping labels will be purchased through pre paid credit cards(paid in cash obviously) on said thumb drive, and I'll change the user account every couple orders. PGP is encouraged to be used when sending confirmation emails containing your address if you know how.

mh48500 said:
One word.......Autoclave.
Click to expand...

I have one arriving this week. Not for fear that dry heat doesn't do the job, simply to save some time. Far to many people sanitize with dry heat and never get an abscess to say that an autoclave is a necessity.
 
Last edited:
AdvancedGrowthLabs said:
I have one arriving this week. Not for fear that dry heat doesn't do the job, simply to save some time. Far to many people sanitize with dry heat and never get an abscess to say that an autoclave is a necessity.
Click to expand...

Im not trying to give you a hard time, but not saying a higher level of sterility is necessary is irresponsible. Think of what pharmaceutical companies spend on facilities, if it were not necessary then why would they do it?

Just because you, or a group of friends has never gotten an abscess does not make the sterilization procedure safe. I like your honesty, most UGs claim to have huge labs which I would say is bulllshit, but just because you are being upfront about things does not make it correct either.

With the information that you are supplying people can make a decision whether to try and use your product or not, and that's cool, but you should be more concerned about safety. You are selling an injectable product using sub standard procedures which could sicken or kill somebody.

I will leave it at that, good luck with your project.
 
mh48500 said:
Im not trying to give you a hard time, but not saying a higher level of sterility is necessary is irresponsible. Think of what pharmaceutical companies spend on facilities, if it were not necessary then why would they do it?

Just because you, or a group of friends has never gotten an abscess does not make the sterilization procedure safe. I like your honesty, most UGs claim to have huge labs which I would say is bulllshit, but just because you are being upfront about things does not make it correct either.

With the information that you are supplying people can make a decision whether to try and use your product or not, and that's cool, but you should be more concerned about safety. You are selling an injectable product using sub standard procedures which could sicken or kill somebody.

I will leave it at that, good luck with your project.
Click to expand...
As I said, I have indeed purchased one so it's a moot point either way. I'll be using it to brew up everything that will be given away in the thread as well.
 
AdvancedGrowthLabs said:
I have been apart of several different online forums for 5 or 6 years now. No, I will not provide my user name or which forums. Over the years I've let slip one to many things hinting towards my main occupation. Having that associated with an account talking about gear is one thing, selling is a whole different thing.
Click to expand...

5-6 years on the boards and not one vet can back you up? I'm sure there are some bros that know you and know you are starting a UG lab. Probably they've used your gear or maybe would be willing to? I don't care about your user name, but I'm sure you've confided in someone, and probably a handful of people. They don't have to come in here and say your other username, or what your career is (IDGAF anyway),but someone with some cred who would be willing to put their rep on the line for you? Come on bro. This happens all the time.

AdvancedGrowthLabs said:
Brewing for 3 years. A year or a year and a half was only for me. Then I started hooking up a couple close buddies as well. I'd sell them anything off the batches I didn't want and they'd use what they wanted and sell the rest.

Yes I keep my gear in my room. Keeping it tucked in away in my closet is much safer than leaving it else where in the house. Guests are nosy, but they respect personal bedrooms. I live alone. Age? Again personal info I am not sharing.
Click to expand...

Age is personal info? LOL! Like anyone could tell shit about you by you saying your age. "Oh, that guy is 37, that must be Joe, the accountant, that works out at my gym and goes to the bar for the chicken wing happy hour every Tuesday!"

Really bro? I mean if you are 18 and live with your folks or roommates, then I could see you not wanting us to know your age or any other "personal" info about you. Most guys probably wouldn't trust some 18 year old to brew their gear. And yes, that has happened before.

AdvancedGrowthLabs said:
I've been using my own gear for years, so no I don't consider selling it as finding guinea pigs.

I picked my supplier by the recommendations of many others I met online. After brewing and noticing the same/better results from other ugl's I've used I felt the recommendations well placed.

I use usp grade oils. I get everything from med lab.

Sterilization. As I said before everything near the work area gets hit with bleach, alcohol. Anything metal/glass gets the same plus 2 hours dry heat. Vials get hit with soap/distilled water/alcohol/2 hours at 400 in the oven(why 2 hours at 400 instead of an hour at 350? why not? I use this stuff too). Vials are covered in tinfoil that was hit with alcohol+dry heat already. As well as the cookie sheets I place them on. Obviously I take the time to clean the oven with the same process before I start disinfecting anything in it. .2 nalgene nylon filter units are used. I send everything through a glass pre filter so I can use less psi and prevent busting the bottoms while keeping a decent flow rate.

And no I can't say I take pics of my setup.
Click to expand...

Well, at least you are (allegedly) buying an autoclave.

Nothing personal man. I'm sure you are probably a good bro. But with the way this board is setup as open source, anybody can come here and say anything they want. So of course we have a lot of new startup UGLs coming in here looking to get their start for free, rather than going to other boards that charge $500 plus a month (or more) for advertising. Several people will take your free gear though. Hope it goes well for them.

If you have any well known vets that can vouch for you though, that would sure help. You should get your post count up to 50, so you can send PMs. Then maybe you can PM me and provide some more info, ref's, etc. I understand not wanting to post stuff publicly. Up to you, but it would sure set some more members at ease.
 
ceo said:
If you have any well known vets that can vouch for you though, that would sure help. You should get your post count up to 50, so you can send PMs. Then maybe you can PM me and provide some more info, ref's, etc. I understand not wanting to post stuff publicly. Up to you, but it would sure set some more members at ease.
Click to expand...

I completely understand where you are coming from, but I'm sticking to the decision of keeping my forum and selling side separate. I am perfectly fine with starting out slower and letting the products advertise themselves.


Alright, a major issue has come up at my real job, and it will cause me to be away from home for a little under 2 weeks. I do not want to go back on my word of getting the products out next week, so instead of postponing the giveaway further, winners will be chosen tonight. The autoclave came in today, so I'll be pulling a late night getting new product brewed up with it.


If I remember correctly I had 2 who volunteered for only the tren cycle, and 1 other who volunteered for anything? I'll go back through the thread and check when I actually pick. But let's get a few more people in on this!! Winners will be announced within the next few hours.
 
How about some specifics on when you want people to log these products? It's highly unlikely that there's 3-4 people who are ready to start a cycle immediately if they are all following a proper time on = time off regiment or cruising until their next blast
 
I can run the tren ASAP because I have 2 more weeks for dbol for my kick start lol but idc If I get chosen I can do whatever
 
You must log in or register to reply here.

Similar threads

Pinch73
Best place to get peds
Replies
30
Views
251
LevButlerov
LevButlerov
R
NAPSGEAR - PHARMAQO LABS/SUN PHARMA
Replies
11
Views
685
RoySimpson
RoySimpson
M
New member need some help regarding EU source
Replies
14
Views
278
Mobster
Mobster
Krock21
Test and npp dosage advice
Replies
25
Views
210
Tiger Salman Khan
Tiger Salman Khan
T
Tirzepatide for fat loss help
Replies
12
Views
101
HarleyGuy
HarleyGuy
Back
Top Bottom