deltoid injection

[invoga]

hello guys, I wanted to know if it is possible to inject 1.5 ml of test E (450mg) in the deltoid?

 

[Mike710]

Yes, depending on muscle size. Oncological best practice is .5-2ml (.5 being children), here is a good site
http://www.oncologynurseadvisor.com...ns-a-review-of-best-practices/article/281208/
See table 1 on page 2

 

[CP3]

Yes, i do 3cc's with no problem

 

[31yogymrat]

I do 3.5cc no prob, just go slow and pull pin halfway out hold for a 10 count then remove helps stop oil from coming out.

 

[Rubisean]

I do 3.5cc no prob, just go slow and pull pin halfway out hold for a 10 count then remove helps stop oil from coming out.

Agreed, I pin delts three times a week with 3cc and never a problem. I try glutes and my lat locks up every time with cramps

 

[MikeSnow]

Everyone is different , 1.5cc should be fine for most in the delts.. I'd still inject slowly and let the oil dissipate for a little before pulling the needle out either way, especially first time.

 

[Inkslingingfreak]

Take it slow and don't freak if you are sore and swollen for a few days with larger doses


Sent from my iPhone using Tapatalk

 

[stevesmi]

I do it all the time

 

[jp4355]

I only do Delts and Quads.
So Heed the Recommendations given before me and you'll be fine.
Albeit a little sore for the 1st Injection, but No Biggie..................................... JP

 

[rhynoplanet]

Where do you guys inject in the delt?

 

[invoga]

thank you guys , really appreciated your advice...

last question, I'm using finasteride 1mg and, I read that finasteride kills anavar, this thing is real?

this is my cycle :

1-12 test e 500mg / week
1-4 anavar 50mg ed
7-12 anavar 50mg ed
3-12 aromasin 12,5 mg eod
8-14 hcg 500iu week

pct

15-19 clomid 50/50/25/25
15-19 nolva 40/40/20/20/10

 

[txjustin]

Where do you guys inject in the delt?

You want to inject on the side, right in the meaty part -- a google image search for "delt injection" brings up some nice pics.

When you are finished, make sure that you remove the needle nice and straight like you went it. Since you'll have the opposing arm doing the work while reaching across the body there will be the tendency to pull the arm back to place as you remove he needle causing some unnecessary trauma to the site.

 

[rhynoplanet]

You want to inject on the side, right in the meaty part -- a google image search for "delt injection" brings up some nice pics.

When you are finished, make sure that you remove the needle nice and straight like you went it. Since you'll have the opposing arm doing the work while reaching across the body there will be the tendency to pull the arm back to place as you remove he needle causing some unnecessary trauma to the site.

Thanks. I can't reach that far to put it in at a 90 angle. No delta for me I guess. Lol

 

[RickRock]

As long as you don't get to excessive on the oil, small muscle groups like delts are fine

 

[xzoomzx]

i hate delt shots lol i use them for low dose test shots but i can hit my glutes while laying down perfectly and my thighs are my second choice shoulders seem to release too much even with a long hold and pinch the muscle skin after nothing works i hate losing lol

 

[BASE]

I love delts. They are the only spot I've never gotten any real PIP in. I'm not a big guy and I have put 3ml in them with no issues. I hate quads (too many nerves) and glutes are hard to get to so I pin the delts way too much probably.

 

[invoga]

thank you guys , really appreciated your advice...

last question, I'm using finasteride 1mg and, I read that finasteride kills anavar, this thing is real?

this is my cycle :

1-12 test e 500mg / week
1-4 anavar 50mg ed
7-12 anavar 50mg ed
3-12 aromasin 12,5 mg eod
8-14 hcg 500iu week

pct

15-19 clomid 50/50/25/25
15-19 nolva 40/40/20/20/10

 

[bonacris]

Rear delts are great if you can get someone to do them. Medial and rear are painless

 

[JackSteel]

Yes it's fine. Depends on how big your delt is but you be the judge. It wasn't until my delts grew that I felt comfortable doing it


Sent from my iPhone using Tapatalk

 

[invoga]

hello guys, what is the right size needle to inject into the deltoid ?

i have some needles 0.55 x 25 mm but I do not know if it's okay

 

[Splat]

hello guys, what is the right size needle to inject into the deltoid ?

i have some needles 0.55 x 25 mm but I do not know if it's okay

Is that a 1/2 inch needle? Personally I think that's a bit small, but I haven't had a lot of luck with delt shots lately (could be my technique though). I don't go lower than an inch needle.

 

[jp4355]

OK, I think that I got this.
25 mm is a 1" Needle.
The 0.55 x 25 mm is a 24 Gauge, most likely made by Braun.
So yes it will work, if that's all you have.

I usually use either 25 gauge x 5/8" with a 3CC barrel for shots over 1cc.
Or a 27 gauge x 1/2" with a 1CC barrel for shots of 1/2CC to 1CC.................................. JP

 

[invoga]

OK, I think that I got this.
25 mm is a 1" Needle.
The 0.55 x 25 mm is a 24 Gauge, most likely made by Braun.
So yes it will work, if that's all you have.

I usually use either 25 gauge x 5/8" with a 3CC barrel for shots over 1cc.
Or a 27 gauge x 1/2" with a 1CC barrel for shots of 1/2CC to 1CC.................................. JP

yes mate, 0,55 x 25 mm 24 gauge ... I can go quiet?

 

[MikeSnow]

I've slin pinned delts with .5 inch but honestly got better results just with a 1 inch real needle.. The delts go deeper than you think, I know guys that can handle 5ccs there (I can only do about 2) but if you don't want the gear leaking out then use a 1 incher and press it in after, pin slow, know how much you can handle, and give it time to dissipate.. And also heat your gear prior to inject..

 

[Mike710]

I've slin pinned delts with .5 inch but honestly got better results just with a 1 inch real needle.. The delts go deeper than you think, I know guys that can handle 5ccs there (I can only do about 2) but if you don't want the gear leaking out then use a 1 incher and press it in after, pin slow, know how much you can handle, and give it time to dissipate.. And also heat your gear prior to inject..

I'm curious what this means. Sink the needle deeper after the injection but before the 20-30 second wait period?