Pin Size & Avoiding Waste

[bigsowndz]

Hi, 2 questions from a relative newb.

1. When using Test-C with a 23 gauge, it's a real slow and annoying process to get the stuff into the pin from the bottle - and then even more of a pain getting it into the muscle. I feel like the pin ends up wiggling around some (especially when using my off hand) as I'm trying to squeeze the stuff into the muscle. I got some 18 gauge to make it easier to get the stuff out of the bottle. Then a friend told me to just use the 18 to get it into the muscle also. It's definitely more painful to get the pin into the muscle, but then the juice gets in the muscle much quicker and easier. If I'm going once a week into each shoulder, am I risking any damage to my delt by using the bigger pin? Do you recommend sticking with the 18 or the 23?

2. After getting the juice into the muscle, there's still a little bit left over in the tip of the pin. Right now that little bit is going to waste. I thought I remembered reading that there's a way to avoid the waste, but I can't remember what it is. Any tips?

Thanks!

 

[arrrtz]

I use 19g to draw and 25g to pin.
23g i use for glutes.
No issues for me.

Not sure how to avoid having left overs i just suck it out of the barrel haha.

I think some guys leave a bit of air in the barrel so it pushes all the oil out through the pin but i havent tried. Too scared after watching blood in blood out lol.

Im sure someone else could elaborate?

Sent from my SM-N910G using Tapatalk

 

[alba81.rm]

Hi, 2 questions from a relative newb.

1. When using Test-C with a 23 gauge, it's a real slow and annoying process to get the stuff into the pin from the bottle - and then even more of a pain getting it into the muscle. I feel like the pin ends up wiggling around some (especially when using my off hand) as I'm trying to squeeze the stuff into the muscle. I got some 18 gauge to make it easier to get the stuff out of the bottle. Then a friend told me to just use the 18 to get it into the muscle also. It's definitely more painful to get the pin into the muscle, but then the juice gets in the muscle much quicker and easier. If I'm going once a week into each shoulder, am I risking any damage to my delt by using the bigger pin? Do you recommend sticking with the 18 or the 23?

2. After getting the juice into the muscle, there's still a little bit left over in the tip of the pin. Right now that little bit is going to waste. I thought I remembered reading that there's a way to avoid the waste, but I can't remember what it is. Any tips?

Thanks!

Hey buddy I've always drawn it with 18g and injected with 23g but the 23g is very slow I've never tried 25 that would be so thin and super slow I've recently started to inject with 21g it's only a little bit thicker than 23g but way better it goes straight in and comes our real easy. Also r u drawing and injecting with 2 separate needles because u should when u draw through the bottle it gets blunt while going through the vial

Sent from my SM-N9005 using Tapatalk

 

[222shane222]

Warm the juice up slightly. 25g is perfect for delta. 18g is going to leave too much scar tissue for long term use.

 

[Masonic Bodybuilder]

I always draw with an 18g and switch to a 23g 1 1/2" for glutes and a 25g 1" for quads and delts. Don't worry about the little waste, it is negligible.

 

[curruptsinner]

I use an 18g to draw, and a 23g to inject, my body fat is so low, that if I choose to inject in my deltoid, I use a 1/2" needle instead of a 1", anywhere else I use a 1", whether it's glutes, quads, or traps. Push the juice in slow, patience is a virtue, and you'll experience way less pain.

 

[bigsowndz]

Thanks fellas, I appreciate it! 18's to draw it out and the fresh 23 to put it in. Got it.

 

[Portfolio]

Hi, 2 questions from a relative newb.

2. After getting the juice into the muscle, there's still a little bit left over in the tip of the pin. Right now that little bit is going to waste. I thought I remembered reading that there's a way to avoid the waste, but I can't remember what it is. Any tips?

Thanks!

I simply draw the remaining juice back into the syringe and then use that same syringe for injecting until its printed ink begins to fade; usually about ten injections.

 

[1Honk123knoH1]

I use 18 to draw 25 to pin. The 25 is slow as hell but I get no pip due to how slow you have to go when pushing the gear in.

I only pin glutes, tired quads 3 times and every time my leg gets hot and it's hard to walk for 3 or 4 days.

Sent from my SGH-I337M using Tapatalk

 

[AddarInc]

I've found drawing with anything from 19 to 21 gauge easy

Injecting with 25 gauge 1 inch ideal. Also slow injection to avoid the "pip".

 

[muskate]

Thanks fellas, I appreciate it! 18's to draw it out and the fresh 23 to put it in. Got it.

Depending on your injection site, you are going to want to use a 23 1' or 1.5' to inject. If you are using glutes or quads, 1.5'. If you are using a leaner body part like shoulders 1'.

 

[s-tren-gth]

I use only big pharma gear which is thicker than UG so only 22g will do.