Pinning question for multiple compounds

[OutlawV2]

Okay guys,

this is probably a dumb question but I think I HAFTA ask it... I've always in the past done blends like Cut Mix (Test, Tren, Mast) with set mixture strengths like 50/50/50 and then i'll use Test Cyp only as a standalone.....

Well now I'm wanting to use Tren Acetate by itself, and a Test E/Equipose blend so that I can up the dosages to the ones I want to run....

My question is how are you guys combining the gear in the needle on days you pin????? Are you drawing the gear from the bottles with the same needle and combining them together on shot days? I would imagine so since nobody wants to take three needles in a day for 3 compounds....

But couldn't that cross contaminate the mixture left in the ampule???? Like you accidentally get a little tren into your test, or a little mast into your tren???? I know this is a dumb question but i'm trying to see how you guys do it...

My pin schedule will be Monday Wednesday Friday

All pins will be 100 mg Tren A, 150 mg Test E, 150 mg EQ.... I'm going to add Winstrol tabs at the end of the cycle to dry me out and get me really lean...

 

[brandoneeds]

i have a designated needle for each compound to pull from the vial/ampoule then put it into the one you pin with.
i have one for npp, and one for test. and i combine them into one for the pin

 

[awm1981]

Agreed with above. A single syringe but multiple 1" 20 gauge needles.

You wont cross contaminate if you dont draw more than you need and try to push some back in after the first draw.

I havent done multiple compounds yet but my buddies all do and they will draw say 1ml of test first and then leave a little air in at the top, then draw say another 1 ML of EQ from a different bottle with a different pin, and so on. Its a little more difficult to be 100% precise measuring the 2nd, 3rd, etc compound but it works and no cross contamination. They just flick the syringe and push any air/air bubbles out and inject away when everything is drawn up.

 

[OutlawV2]

Yeah I get the designated needle part but i'm still wondering how someone can avoid no cross contamination back into the vial..... I never pin with the draw needle ever for obvious reasons.... I still feel like it would contaminate the mixture no???

- - - Updated - - -

Agreed with above. A single syringe but multiple 1" 20 gauge needles.

You wont cross contaminate if you dont draw more than you need and try to push some back in after the first draw.

I havent done multiple compounds yet but my buddies all do and they will draw say 1ml of test first and then leave a little air in at the top, then draw say another 1 ML of EQ from a different bottle with a different pin, and so on. Its a little more difficult to be 100% precise measuring the 2nd, 3rd, etc compound but it works and no cross contamination. They just flick the syringe and push any air/air bubbles out and inject away when everything is drawn up.

Okay I can get with that.... seems like i'm gonna be mixing chemicals like a mad fukkin scientist three times a week... I'm gonna need a calendar to keep track of all this shit... LOL

 

[Eddie Haskell]

Are you drawing the gear from the bottles with the same needle and combining them together on shot days?

In a word - yes.

But couldn't that cross contaminate the mixture left in the ampule???? Like you accidentally get a little tren into your test, or a little mast into your tren????

Provided that your draw needle, your vial tops and your paws are clean, no, there is no danger of (a shudder) "cross contamination."
I've been doing it that way for some ten years now and without any problems. So relax.

I know this is a dumb question but i'm trying to see how you guys do it.

It wasn't a dumb question. Asking questions is how we learn.

 

[OutlawV2]

Okay that will work!!!!

 

[Eddie Haskell]

Okay that will work!!!!

Glad to "hear" it.

 

[awm1981]

Your other option is PSL sells a really nice vial adapter:

http://puritysourcelabs.ru/injectable-usa/693-vial-adapter-for-10-ml-vials-20mm-usa.html

Would take out all of the pin switching to draw.

 

[Mobster]

I've never mixed stuff. I'm also a little suspicious of mega blends.

 

[stevesmi]

mix in the syringe by taking off the cap

the risk of contamination exists when you breathe, go to the gym, etc.

people are too paranoid about this. you will be fine

 

[Eddie Haskell]

I've never mixed stuff. I'm also a little suspicious of mega blends.

Damned AAS segregationist!

- - - Updated - - -

You know, each time that I read some of my old posts, I find myself shaking me head, rolling me eyes and trying to keep me pie hole shut. ROFLMM-fAO!

- - - Updated - - -

Oh and, holeshot!

 

[OutlawV2]

Sound good guys..... Yeah I just get worried about possibly injecting some bs into my ass.... And yeah i did see the PSL cap thingy. I might throw it in there when i purchase from them soon.

 

[Eddie Haskell]

Sound good guys..... Yeah I just get worried about possibly injecting some bs into my ass.... And yeah i did see the PSL cap thingy. I might throw it in there when i purchase from them soon.

Just be sure to follow basic sanitation procedures, and you'll be fine, Outlaw, even without that cap thingy.

 

[OutlawV2]

Just be sure to follow basic sanitation procedures, and you'll be fine, Outlaw, even without that cap thingy

Yeah I'm SUPER excited about this cycle coming up since i'll be STARTING in pretty good ass shape.... I'm currently upping my cardio and i'm going to drop to 175 lbs prior to starting the blast... I want to SEE my fukkin gains as they appear...

 

[awm1981]

Sound good guys..... Yeah I just get worried about possibly injecting some bs into my ass.... And yeah i did see the PSL cap thingy. I might throw it in there when i purchase from them soon.

Yea I bought it for my Test. Only dosing one substance (Test Cyp) but spares the need to have to switch out pins and easier to draw IMO.

As Eddie said though as long as you wash your hands thoroughly, swab everything with alcohol, and are careful you wont have an issue at all.

 

[muskate]

Yeah I'm SUPER excited about this cycle coming up since i'll be STARTING in pretty good ass shape.... I'm currently upping my cardio and i'm going to drop to 175 lbs prior to starting the blast... I want to SEE my fukkin gains as they appear...

That's the best way to do it. The body grows best in a lean state

 

[Masonic Bodybuilder]

I have always used the same drawing needle for multiple compounds. It would be such a small amount of gear mixing that it makes no difference.

 

[Old Pug]

Damned AAS segregationist!

- - - Updated - - -

It may be that it's Sunday or that I just worked out and am exhausted but i found that to be very amusing.

Old Pug

 

[Eddie Haskell]

Damned AAS segregationist!

- - - Updated - - -

It may be that it's Sunday or that I just worked out and am exhausted but i found that to be very amusing.

Old Pug

I'm certain that had everything to do with this day being Sunday and with you're being exhausted, Old Pug.