Please Scroll Down to See Forums Below 
Weird thing going on here, so i went to do my injection and noticed that the liquid had turned a sort of, opaque white? while previously it was just a typical light yellow tent/clear fluid. Does anyone know what has happened, if its still usable, or if its become compromised/gone rancid or something? thanks bros. Just dont want to inject something that might cause infection or put me at risk.
Hard to tell. Do you have any pics you could post?
Have you tried to shake it/heat it up?
Have you tried to shake it/heat it up?
Did it get really cold by any chance? Could just need to be warmed up as Finn mentioned. Test is not fragile like HGH oro Peptides so warm up and/or shake to see if it turns back to the normal coloration.
Unfortunately I’m not currently home, so I can’t supply pictures, but it was fairly cold in my room but shouldn’t be enough to turn it white. I’m fairly certain bacteria may have contaminated the liquid. How would one go about heating it up? A hot plate? Or is there any other viable methods?
Bacteria would not cause it to have any discoloration.. discoloration mostly comes from either crashing, moisture, or even oxidization... Prolonged exposure to heat or cold can create an unstable environment for the hormone..
Re-heating:::::
Take a saucer pan and fill it with water and bring it to a complete boil.. remove it from the flame and immediately submerged the vial.. allow it to set until you notice the color (the hormone melting back into the carrier oil).. remove and swirl around, and repeat this step if need be..
- - - Updated - - -
By the way exactly how much oil are we talkin here?? Is it home brew or a larger amount?
First off thank you so very much for the useful information, I just got off work so I’m going to try this now. And it’s just about 7ml or so. I’ve gone through 3 other vials of the exact same brand with no issue, so this definitely scared me a bit as it’s the first time I’ve ever ran into a change in coloration. I’ll boil it and report back with the results. Shoutout to all the bros that commented on this post, really appreciate you guys
That's what this community is for everyone is here to assist one another..
If by chance you have issues trying to reconstitute it, just throw it out it's only 7mL and it's not worth the potential and slew of problems that can follow with it..
For sure man, luckily I have an order from purity source coming in sometime next week so, worse comes to worst I’ll jsut be out for a little while. The last thing I want is an abscess
I cannot thank you bros enough!! Boiled some water, poured into a cup, put test in said cup. Boom! Shits back to being clear and clean as ever! I appreciate you bros so much thank you guys!
- - - Updated - - -
Turns out I spoke too soon, after heating it and letting it cool down, it returned back to that opaque white
It doesn't sound right.
It's not staying in suspension. Contact the source
Yea I’ve basically decided not to use it. It’s not worth risking an abscess. I can’t really contact the guy I got it from but it’s honestly okay. Hopefully my package from purity source will come in next week (even tho it says it left Poland and I haven’t received an update in 4 says
)
Cup of hot (not boiling) water.
- - - Updated - - -
Yeah it's crashed.
Yea no matter what heating method I use (even tried oven, ventilated with needle, at 250 for 45 minutes) it only stays clear for a little bit (Ii.e 10 minutes or so) then it’s back to cloudy. No luck
As the guys say contact the seller.
Agreed with the statement above.
The last thing I want is an abscess
