Please Scroll Down to See Forums Below
napsgear
genezapharmateuticals
domestic-supply US-PHARMACIES
UGL OZ UGFREAK OxygenPharm
napsgeargenezapharmateuticals domestic-supplyUS-PHARMACIESUGL OZUGFREAKOxygenPharm

Cloudy Retatrutide

FitnFifty25

FitnFifty25

Well-known member
Registered
Gday Guys
So I’ve just reconstituted some Ret and it has gone cloudy. I followed all the protocols I usually do. Was clear at the start. I’m storing it in the fridge where I store all my peps . It comes from a trusted source so that isn’t the issue. Any advice would be greatly appreciated eg can I still use it or should I be concerned.
Cheers
 
FitnFifty25 said:
Gday Guys
So I’ve just reconstituted some Ret and it has gone cloudy. I followed all the protocols I usually do. Was clear at the start. I’m storing it in the fridge where I store all my peps . It comes from a trusted source so that isn’t the issue. Any advice would be greatly appreciated eg can I still use it or should I be concerned.
Cheers
Click to expand...
Can you please post pics of the retatrutide bottle? thanks @FitnFifty25
 

Attachments

  • IMG_6760.webp
    IMG_6760.webp
    353 KB · Views: 184
Yeah I’m in discussion with them. I wasn’t trying to over complicate things I just thought I’d ask the brains trust if they had any ideas. Trying to learn myself as well so I can help in the future.
 
FitnFifty25 said:
Yeah I’m in discussion with them. I wasn’t trying to over complicate things I just thought I’d ask the brains trust if they had any ideas. Trying to learn myself as well so I can help in the future.
Click to expand...
Many factors comes in play, temperature of peptide and temperature of bac water, sometimes speed u throw bac water inside, quality of bac water or sometimes jst a bad day, jst looking vials how someone can say what happened and what u did?
I was having problem constituting gh with premium supps bac water. It used to go cloudy.
 
FitnFifty25 said:
Gday Guys
So I’ve just reconstituted some Ret and it has gone cloudy. I followed all the protocols I usually do. Was clear at the start. I’m storing it in the fridge where I store all my peps . It comes from a trusted source so that isn’t the issue. Any advice would be greatly appreciated eg can I still use it or should I be concerned.
Cheers
Click to expand...
when you mixed it did you squirt on the powder direct? did you shake it?
these are common mistakes people make that can ruin it
 
FitnFifty25 said:
Gday Guys
So I’ve just reconstituted some Ret and it has gone cloudy. I followed all the protocols I usually do. Was clear at the start. I’m storing it in the fridge where I store all my peps . It comes from a trusted source so that isn’t the issue. Any advice would be greatly appreciated eg can I still use it or should I be concerned.
Cheers
Click to expand...
bros try mixing another vial. see if same thing happen and let us know
 
FitnFifty25 said:
Gday Guys
So I’ve just reconstituted some Ret and it has gone cloudy. I followed all the protocols I usually do. Was clear at the start. I’m storing it in the fridge where I store all my peps . It comes from a trusted source so that isn’t the issue. Any advice would be greatly appreciated eg can I still use it or should I be concerned.
Cheers
Click to expand...
If you're not sure about something then don't use it. It's not a big deal.
 
Ulter said:
If you're not sure about something then don't use it. It's not a big deal.
Click to expand...
Yeah I think I’ve been misunderstood I’m not making a big deal of it I’m trying to learn and was after some sage advice, which is what I joined Evo for.
The Ret is for my wife and just wanted to be sure of things before proceeding. Sometimes there are solutions for issues that arise that aren’t obvious. I think I will discard the vial and get a new one. so I’ve listened AB’s learnt from all the above info.
Cheers to all and thx
 
stevesmi said:
when you mixed it did you squirt on the powder direct? did you shake it?
these are common mistakes people make that can ruin it
Click to expand...
No I learnt early on with some imp and cjc not to do that. I aim down the side of the vial now.
Oh and I also hold the plunger back so it doesn’t jet into the vacuum and froth the powder. They don’t tell you about that one in the vids 🤣🤣
 
FitnFifty25 said:
Gday Guys
So I’ve just reconstituted some Ret and it has gone cloudy. I followed all the protocols I usually do. Was clear at the start. I’m storing it in the fridge where I store all my peps . It comes from a trusted source so that isn’t the issue. Any advice would be greatly appreciated eg can I still use it or should I be concerned.
Cheers
Click to expand...
There is a lot of issues that can be happening. Sometimes it just doesn't mix the right way.
 
FitnFifty25 said:
No I learnt early on with some imp and cjc not to do that. I aim down the side of the vial now.
Oh and I also hold the plunger back so it doesn’t jet into the vacuum and froth the powder. They don’t tell you about that one in the vids 🤣🤣
Click to expand...
Sounds like you probably did everything right. It's just a bad mix for some reason.
 
Based on the pic that’s from China wholesalers with no label; I’d get another one and try again.
 
LevButlerov said:
I feel like he injected the bac water too fast imo @HarleyGuy
Click to expand...
Agreed. He says he didn't, but I don't think enough people know how fragile they are. This is why I always say to use an insulin pin to add bac water and I hold the top of the plunger with my thumb and let it take about 10 seconds to slowly slide in.

I once saw my buddy use an 18g to add bac water and jam it to the bottom and watched the peptide fly everywhere, then he had to turn it upside down and let it sit so it could reconstitute all the brain matter on inside top of the vial. He saw nothing wrong with this method and refused to change the way he did it so I was like, huh ok.
 
HarleyGuy said:
Agreed. He says he didn't, but I don't think enough people know how fragile they are. This is why I always say to use an insulin pin to add bac water and I hold the top of the plunger with my thumb and let it take about 10 seconds to slowly slide in.

I once saw my buddy use an 18g to add bac water and jam it to the bottom and watched the peptide fly everywhere, then he had to turn it upside down and let it sit so it could reconstitute all the brain matter on inside top of the vial. He saw nothing wrong with this method and refused to change the way he did it so I was like, huh ok.
Click to expand...
For sure I think at least 20-30% peptides destroyed by user in prep imo @HarleyGuy
 
FitnFifty25 said:
No I learnt early on with some imp and cjc not to do that. I aim down the side of the vial now.
Oh and I also hold the plunger back so it doesn’t jet into the vacuum and froth the powder. They don’t tell you about that one in the vids 🤣🤣
Click to expand...
try another vial and see if the same thing happens
 
stevesmi said:
try another vial and see if the same thing happens
Click to expand...
Yes exactly. And @FitnFifty25 don't depressurize the vial before you put the bac water in and while you put the bac water in (with an insulin pin) put it in almost exaggeratingly slow by holding the plunger from wanting to pull the bac water in too fast. Next, slowly swirl (in a round and round, not up and down) as it goes in. Hold it at a 45 degree angle and just turn the vial as it goes in. If you use 2ml of bac water you'll have to use two full insulin pins that are 100iu (1ml).

Hot tip: If you try and draw anything from the vial and it simply won't come out then it's still pressurized against you drawing so stick an insulin syringe in the vial, pull the plunger completely out of the syringe, the remove the syringe and discard the plunger and syringe. Your vial is now equalized and you can draw easily without it fighting you. @s.gentz @LevButlerov

Post a pic of the next vial you get and don't be afraid to indicate where it's from either this will help us help you determine whether it's all bunk or not.
 
FitnFifty25 said:
Yeah I think I’ve been misunderstood I’m not making a big deal of it I’m trying to learn and was after some sage advice, which is what I joined Evo for.
The Ret is for my wife and just wanted to be sure of things before proceeding. Sometimes there are solutions for issues that arise that aren’t obvious. I think I will discard the vial and get a new one. so I’ve listened AB’s learnt from all the above info.
Cheers to all and thx
Click to expand...
maybe a bit yes, but i think you are on the right track
 
HarleyGuy said:
Yes exactly. And @FitnFifty25 don't depressurize the vial before you put the bac water in and while you put the bac water in (with an insulin pin) put it in almost exaggeratingly slow by holding the plunger from wanting to pull the bac water in too fast. Next, slowly swirl (in a round and round, not up and down) as it goes in. Hold it at a 45 degree angle and just turn the vial as it goes in. If you use 2ml of bac water you'll have to use two full insulin pins that are 100iu (1ml).

Hot tip: If you try and draw anything from the vial and it simply won't come out then it's still pressurized against you drawing so stick an insulin syringe in the vial, pull the plunger completely out of the syringe, the remove the syringe and discard the plunger and syringe. Your vial is now equalized and you can draw easily without it fighting you. @s.gentz @LevButlerov

Post a pic of the next vial you get and don't be afraid to indicate where it's from either this will help us help you determine whether it's all bunk or not.
Click to expand...
good tips

and if all else fails it doesn't hurt to reach out to the source and ask for a replacement. a good source would have no issues replacing it
 
stevesmi said:
and if all else fails it doesn't hurt to reach out to the source and ask for a replacement. a good source would have no issues replacing it
Click to expand...
Ah the magic question... the source :ROFLMAO:
 
Ok guys, thx for all the Feedback I’ve learnt heaps. I’ve spoken to my supplier and we are sorting through the issue. I won’t be naming them at this time as I have seen how this can very quickly be blown out of proportion. I can tell you you that they are a very trusted source and that I have full confidence in the issue, be it mine or theirs, being resolved. I will let you know the outcome and appreciate all the comments.
Cheers
 
FitnFifty25 said:
Ok guys, thx for all the Feedback I’ve learnt heaps. I’ve spoken to my supplier and we are sorting through the issue. I won’t be naming them at this time as I have seen how this can very quickly be blown out of proportion. I can tell you you that they are a very trusted source and that I have full confidence in the issue, be it mine or theirs, being resolved. I will let you know the outcome and appreciate all the comments.
Cheers
Click to expand...
EVO family always here to help you :D @FitnFifty25
are you going to start the log for us? :D
 
You must log in or register to reply here.

Similar threads

S
Newbie seeking advice, retatrutide reconstitution for dummies.
Replies
11
Views
372
ROIDDERS
ROIDDERS
Doctakay
Approved Log Testosterone EQ HGH BPc157 Retatrutide Mots-C Cycle Log
5 6 7 8 9 10 11 12 13 14
Replies
1K
Views
13K
Kopite67
Kopite67
stevedude19
Approved Log My Trt and Retatrutide Cycle Log
Replies
28
Views
551
LevButlerov
LevButlerov
Mantic
Approved Log 18 weeks out IFBB show - Bodybuilding Prep Cycle Log
Replies
50
Views
385
bss
bss
Kingofspades712
Approved Log Testosterone Retatrutide Cardarine Cycle Log
2
Replies
119
Views
859
Kingofspades712
Kingofspades712
Back
Top Bottom