ugfreak.to getting floaters after using large needle

[Aloeim]

so my buddy works at a lab and hooked me up with some thick needles, 15gauge
started using them to draw my gear. I have found it’s much easier to use those than the standard 25 gauge which take forever
anyway using ugfreak gear and when I went to extract the oil a piece of the rubber fell into the gear lol. I’m not saying it is their fault since I used a super thick needle, but at the same time shouldn’t they have stronger rubber and replace my vial? Next time I will use a 21G

 

[Npcclassicphysique champ]

so my buddy works at a lab and hooked me up with some thick needles, 15gauge
started using them to draw my gear. I have found it’s much easier to use those than the standard 25 gauge which take forever
anyway using ugfreak gear and when I went to extract the oil a piece of the rubber fell into the gear lol. I’m not saying it is their fault since I used a super thick needle, but at the same time shouldn’t they have stronger rubber and replace my vial? Next time I will use a 21G

This is because you used a high G needle I mean 15G is a nail bro! you broke the rubber top.

Normal multi use vials like para pharma 10ml need 21G to draw for best results not less or you'll break the rubber.

 

[Quadsweep]

i'm confused how this is ugfreak's fault lol

you aren't supposed to use such a huge needle that size regardless. i hope you don't expect the rubber to withstand a harpoon going through it.

this one is on YOU

 

[MONSTRO]

if you cut the rubber the its gonna fall in. you aren't very smart

 

[Vadim Fedorov]

Make sure that you use proper size needles to both draw the oil and inject

 

[2Thick]

don't blame a source for your mistakes

 

[e2]

i've used ugfreak many times. never once had this happen, use a proper size needle DUH

 

[StevenDarwinMD]

APPROVED - UGFREAK.TO
APPROVED REVIEW - CHECKED- NEXT TIME PLEASE DRAW THE OIL PROPERLY

 

[Ulter]

you are being silly. just stop expecting the sources to baby you

 

[chesty]

so you screwed up and now want to blame the source?

 

[ROIDDERS]

that's like not getting your oil changed correctly and then blaming the car manufacturer for when your engine blows up

 

[ceo]

bros this dude flat out silly
ugfreak has great quality gear and vials. never had this happen to me and did a thousand oil draws from their vials

 

[Mobster]

Nope. It's like using a centre punch and moaning about the hole lol

I recently ran a cycle of their product using a 24g throughout (drawing with a blunt/used one and injecting with a fresh) and never had this issue. It IS easier to draw with a large gauge pin but this is what happens. Any larger and you'd have had an open hole.

And you can, of course, get bigger or smaller pins online easily. Their use, purchase etc, is not a legal issue. Heck I used Amazon last time but you can buy direct no sweat from medical supply companies

 

[dylangemelli]

NOONE uses a 15 gauge man, thats on you.. thats a harpoon to say the least... this is ALL on you

 

[ballin2504]

That would of happened with any supplier or any gear with that size needle

 

[25homes]

so my buddy works at a lab and hooked me up with some thick needles, 15gauge
started using them to draw my gear. I have found it’s much easier to use those than the standard 25 gauge which take forever
anyway using ugfreak gear and when I went to extract the oil a piece of the rubber fell into the gear lol. I’m not saying it is their fault since I used a super thick needle, but at the same time shouldn’t they have stronger rubber and replace my vial? Next time I will use a 21G

15g way to big breaking off pieces of stopper

 

[RoySimpson]

Order the right needles it isnt difficult!